We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Hand Protection Must Be Worn Sign
- Item #:
- E4622
- Sign Reads:
- Danger Corrosive Hand Protection Must Be Worn
- Sign Design:
- International Corrosive Substance Hazard Symbol
- Compliance:
-
- ANSI Z535 / OSHA
- LEED Compliant
Other configurations of this product
A Hand Protection Must Be Worn Sign has official ANSI headers for safety protocol and compliance. A Hand Protection Must Be Worn Sign is a helpful tool to help protect the health and safety of personnel, and is not a replacement for required protective measures for lessening or removing hazards.
Danger Corrosive Hand Protection Must Be Worn
|
10 × 14″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| 3.5 Mil Peel and Stick Vinyl Label | N/A | N/A | E4622-AC | $9.95 | $8.50 | $8.15 | $7.85 | $6.95 | $6.05 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | E4622-BC | $10.35 | $9.85 | $9.35 | $8.75 | $7.45 | $6.25 | ||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | E4622-FC | $18.25 | $17.25 | $15.10 | $14.50 | $13.80 | $11.50 | ||
|
12 × 18″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .055″ Polyethylene Plastic | None | Four ¼″ holes (one in each corner) | E4622-A85 | $17.75 | $15.50 | $14.75 | $14.25 | $13.75 | $12.85 | ||
| .063″ White Rust-Free Aluminum | None | Four ¼″ holes (one in each corner) | E4622-A8C | $19.75 | $17.75 | $16.75 | $15.75 | $14.75 | $13.75 | ||
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
Max Recommended
Viewing Distance*
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
* Under favorable viewing conditions.
| Size | Width | Height | Average Text Size |
Max Viewing Distance |
Available Materials | Mounting Holes | Corner Radius | Diagram |
|---|---|---|---|---|---|---|---|---|
| 10 × 14″ | 10″ | 14″ | ¾″ | Up to 18′ 9″ |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram | |||||
| 12 × 18″ | 12″ | 18″ | 15/16″ | Up to 23′ 5″ |
|
Four ¼″ Holes (#12 or 7/32″ screws recommended) | ½″ | Diagram |
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z535.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
| Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
Overlaminate |
|---|---|---|---|---|---|
| Labels | |||||
| Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. | 3.5 mils | 4 to 5 Years | -20° to 176° F |
|
N/A |
| Plastic | |||||
| Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures. | 0.055″ | 3 to 5 Years | -40° to 180° F |
|
N/A |
|
|
||||
| Aluminum | |||||
| Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. | 0.04″ | 5 to 7 Years | -40° to 212° F |
|
|
| 0.063″ | 5 to 7 Years | -40° to 212° F |
|
|
|
| None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
|---|---|---|---|---|
| ATSM D956 Type | – | Type I | Type IV | Type IX |
| Brightness | – | Standard Material | 3x More | 10x More |
| Night-Time Visibility | – | 500' | 1,000' | 1,500' |
| Reflectivity |
|
|
|
|
Using the latest digital printing technologies and processes, your Hand Protection Must Be Worn Sign has text and graphics printed using UV inks directly onto the substrate without lamination. Your sign text and graphics will not peel, unlike signs from companies that laminate graphics over the sign material. These advanced practices also eliminate set-up charges and minimums. Your set-up time is also greatly reduced, allowing SafetySign.com to print your Hand Protection Must Be Worn Sign quickly and have it shipped out fast.
Printing Methods
Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
Fonts
The text is printed in Arial Black font.
The Hand Protection Must Be Worn Sign from SafetySign.com uses this font to create a bold message that stands out in order to grab your attention, while also remaining clearly legible at the maximum safe viewing distance of the product.
Recommended Accessories
- All
- Brackets
- Cones
- Foam Bumpers
- Hardware
- Tape
- Ties
- Tools
8" Long Heavy Duty Nylon Ties
NT8
7.5″ Black UV Resistant Cable Tie - 50 lb Tensile Strength
NT7
30" Silver Yard Sign Stake
Y4995
SignGuardian™ Tamper-Resistant 2" Chain Link Fence Brackets for 7/32” or 1/4" Mounting Holes
Y4963, Y4962
Screwdriver for SignGuardian™ and 1-Way R™ Bolts
Y4965
#10 x 1-1/2" Round Head Screw for Wood
Y4999
3/16 x 1-1/2" Bolting Set (2 bolts, 2 nuts, 4 washers)
Y4997
Corner Foam Bumper
R5600
I-Beam Edge Foam Bumper
R5601
Flat Surface Foam Bumper
R5602
Corner Protector For Foam Bumper
R5604
42" Cone with Reflective Bands and 16lb. Base
X5653
Suction Cups with Hook For Sign Hanging
Y3548
Double-Sided Adhesive Foam Tape
Y3549
Wing Bracket
Y3539
5/32" Cushioned T-Handle Hex Key
Y3522
5/32" L-Handle Hex Key
Y3523
L-Handle Hex Key For Vandal Resistant Set Screws
Y3524
5/32" Hex Bit For Vandal Resistant Set Screws
Y3525
Vandal Resistant Set Screws
Y3526
