We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Does Not Meet OSHA Specifications Tag
Double-Sided
- Item #:
- E1514
- Tag Reads:
- Tag Front Reads: Caution This Scaffold Does Not Meet Federal/State OSHA Specifications All Employees Working From This Sca … See Full Text
- Tag Design:
- Withstands Pull Force of 50 lb.
- Compliance:
-
- OSHA
Other configurations of this product
This Does Not Meet OSHA Specifications Tag uses informational messages to address scaffold compliance procedures and safety concerns. A Does Not Meet OSHA Specifications Tag is a useful tool to help protect the health and safety of personnel, but is not a substitute for required protective measures for eliminating or reducing hazards.
Tag Front Reads: Caution This Scaffold Does Not Meet Federal/State OSHA Specifications All Employees Working From This Scaffold Must Wear And Use An Approved Safety Harness Do Not Alter Date:_______ Authorized Signature:_______ Comments:_______ / Back Reads: Caution Reasons For Using Caution Tag:_______ It Is Unlawful To Remove Or Interfere With This Safety System. Sign:_______
|
3¼ × 5⅝″
|
||||||
|---|---|---|---|---|---|---|
| Material | Packaging | Sku | Quantity/Price | |||
|
||||||
| 15 Mil Double-Sided Matte Vinyl with ⅜″ Brass Grommet and 7.5″ Black Nylon Tie | Sold in Packages of 5 - Includes nylon ties for each tag | E1514 | $11.90 | $11.30 | $9.95 | |
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
SCAFFOLD TAGS
To view and print a PDF version of this page, click on this link: SafetySign.com Scaffold Tags PDF→
To Learn about the Materials used in the making of this sign, refer to the Tab called "Material Descriptions..."
Tag Construction:
- Material Thickness:
- 4 x 5-1/2” 15 mil Matte Vinyl.
- 3-1/4 x 5-5/8” 15 mil Matte Vinyl.
- Description: Durable 15 mil write on vinyl which is ideal for every day use throughout any facility.
- Outdoor Durability: 2 - 3 years.
- Attachment:
- 4 x 5-1/2” Tag: 7/32" ID Brass Grommet and 6” nylon ties (sold in packages of 5 tags & 5 nylon ties).
- 3-1/4 x 5-5/8” Tags: 3/8" ID Brass Grommet and 6” nylon ties (sold in packages of 5 tags & 5 nylon ties).
- Service Temperature: 0°F - 150°F.
Scaffold Tagging & Inspection:
- The most effective means of communication between the scaffold builder and the scaffold user is a scaffold tag.
- The following guidelines will assist you in developing an appropriate tagging system:
- Inspection and tagging of the scaffold is to be performed by a competent worker experienced in the erection of scaffolds.
- A unique scaffold identification tag number must be clearly identified on all tags for tracking purposes.
- All scaffolds shall be inspected after erection as per OSHA requirements.
- All scaffold identification tags will be of solid green, yellow, or red color with black lettering.
- Green Tags will be hung on scaffolds that have been inspected and are safe for use.
- Yellow “CAUTION” tags are used whenever the scaffold has been modified to meet work requirements, and as a result could present a hazard to the user, this tag also informs the user of any fall requirements devices that may be needed.
- Red “DANGER - DO NOT USE” tags will used during erection or dismantling when the scaffold is left unattended and replace all green and yellow tags in the event a scaffold has been deemed unfit for use.
Scaffold Tags 4 x 5-1/2"
Scaffold Tags 3-1/4 x 5-5/8"
Which Size Sign Should I Choose?
The Does Not Meet OSHA Specifications Tag is offered in the size shown in the table below. Use the data in the table to help you decide if the size of this Does Not Meet OSHA Specifications Tag will meet your requirements.
![]()
| Size | Width | Height | Available Materials | Diagram |
|---|---|---|---|---|
| 3¼ × 5⅝″ | 3¼″ | 5⅝″ |
|
Diagram |
| Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
|---|---|---|---|---|
| Double-Sided Matte Vinyl with Metal Grommet and Nylon Tie Tough 15 mils thick matte vinyl is made for indoor and outdoor use, with a metal grommet eyelet that is ideal for rough handling and multiple uses. Durable UV resistant nylon ties that have 50 lb. of tensile strength are included for easy attachment. | 15 mils | 4 to 5 Years | -40° to 160° F |
|
| None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
|---|---|---|---|---|
| ATSM D956 Type | – | Type I | Type IV | Type IX |
| Brightness | – | Standard Material | 3x More | 10x More |
| Night-Time Visibility | – | 500' | 1,000' | 1,500' |
| Reflectivity |
|
|
|
|
This Does Not Meet OSHA Specifications Tag is printed using the latest digital printing technologies and processes. SafetySign.com prints your text and graphics directly onto the substrate without lamination using UV inks. Your Does Not Meet OSHA Specifications Tag text and graphics will not peel, unlike tags from companies that laminate graphics over the tag material.
Printing Methods
Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
Fonts
The text is printed in Arial Black font.
The Does Not Meet OSHA Specifications Tag from SafetySign.com uses this font to create a bold message that stands out in order to grab your attention, while also remaining clearly legible at the maximum safe viewing distance of the product.
