Roof Access Sign 25723 - by SafetySign.com

Size
Material
Printing

Which Size Sign Should I Choose? The Roof Access Sign is available in the size listed in the table below. Use the information in the table to help you determine if the size of this Roof Access Sign will meet your needs.

Size	Width	Height	Average Text Size	Max Viewing Distance	Available Materials	Mounting Holes	Corner Radius	Diagram
12″ Square	12″	12″	1½″	Up to 37′ 6″	3.5 Mil Peel and Stick Vinyl Label	N/A	¼″	Diagram
12″ Square	12″	12″	1½″	Up to 37′ 6″	.040″ Rust-Free Aluminum .040″ Engineering Grade Reflective Aluminum .055″ Polyethylene Plastic	Four 7/32″ Holes (#10 or 3/16″ screws recommended)	¼″	Diagram

More Options SafetySign.com understands that the Roof Access Sign may not be available in the size that you require. Please contact our customer service team today and we’ll be happy to work with you to produce exactly what you need. Contact us now.

Material	Thickness	Outdoor Durability	Service Temp. Range	Available Sizes	Overlaminate
Labels
Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F.	3.5 mils	4 to 5 Years	-20° to 176° F	12″ Square	N/A
Plastic
Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures.	0.055″	3 to 5 Years	-40° to 180° F	12″ Square	N/A
Aluminum
Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage.	0.04″	5 to 7 Years	-40° to 212° F	12″ Square	None
Engineering Grade Reflective Aluminum A durable enclosed lens retro-reflective material permanently adhered to aluminum. It is an economical choice for non-critical traffic signs, parking lot signs, and safety signs. The pattern free face allows for clean graphic imaging. It meets the requirements of ASTM D4956 Type I, and will remain effective for up to 7 years. Resistant to fading and mild chemicals. Reflectivity:	0.04″	Up to 7 Years	-10°F - 130°F	12″ Square	None

	None	Engineering Grade	High Intensity Prismatic	Diamond Grade
ATSM D956 Type	–	Type I	Type IV	Type IX
Brightness	–	Standard Material	3x More	10x More
Night-Time Visibility	–	500'	1,000'	1,500'
Reflectivity

SafetySign.com understands that the Roof Access Sign may not be available in a material that meets your requirements. Please contact our customer service team today and we’ll be happy to work with you to find the right material for your needs. Contact us now.

Using the latest digital printing technologies and processes, your Roof Access Sign has text and graphics printed directly onto the substrate without lamination. Using UV inks, your Roof Access Sign text and graphics will not peel, unlike signs from companies that laminate graphics over the sign material. These advanced practices also eliminate set-up charges and minimums. Your set-up time is also greatly reduced, allowing SafetySign.com to print your signs quickly and have them shipped out fast.

Printing Methods

We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.

Cross-Hatch Ink Adhesion Test

SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.

We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.