The "WARNING: DO NOT DISCONNECT UNDER LOAD" label with general warning symbol, cautioning against operating a disconnect or connector while current is flowing. Orange and white background with black lettering supports NEC 690.15(B) marking requirements for PV connectors and disconnecting means not rated for load-break operation. Warns that a disconnect or connector must not be opened while current is flowing. For PV connectors and disconnecting means not rated for load-break operation.
Sizes: 4¼" x 1⅞"
Materials: Polyester
Placement & use: Apply on or next to connectors and disconnects that cannot break load current. Install before the system is energized.
Compliance: ANSI Z535 · UL® Recognized (UL 969)
Specifications:
MATERIAL: Vinyl / Polyester
CONSTRUCTION: Outdoor-rated solar label material with protective overlaminate where applicable
OUTDOOR RATED: Yes
UV STABILITY: Designed for outdoor solar and electrical labeling applications
ADHESIVE: Permanent pressure-sensitive adhesive
BEST USE: Solar circuit labels, PV warning labels, electrical panels, disconnects, raceways, combiner boxes, inverters, and service equipment
CODE USE: Photovoltaic and electrical system identification
Label Material: 3.5 Mil Adhesive Backed Vinyl Film:
3.5 mil thick flexible vinyl film coated with an aggressive permanent acrylic adhesive.
Graphics are digital or screen printed with UV inks.
Vinyl signs are the most economical option available. A favorite material for indoor application.
Printed image will resist fading and mild chemicals.
Outdoor Durability: 3 to 4 years
Material Flexibility: Conform to either curved or flat surfaces
Service Temp Range: -40°F to 180°F
Min. Application Temp: 50° F
Surface Preparation: Clean and Dry
Ink Features: Printed with UV Inks
Printing Process: Digital or Screen
Back Adhesive: Yes
2 Mil UL® Recognized White Polyester w/ Clear Overlam
SafetySign.com is always looking for ways to provide customers with better signage options. To provide you with labels that last longer in harsh environments, we manufacture UL® Recognized polyester labels.
These UL® Recognized labels are superior to other labels because they perform better and last longer in tough environments.
Material
Service Temperatures
Lifespan
UL® Recognized Polyester
-40°F to 302°F
5-8 years
Basic vinyl material
40°F to 180°F
3-4 years
These labels have a service temperature range of -40°F to 302°F and an outdoor durability of 5 to 8 years. They resist extreme heat, chemicals, and abrasion. Most of our selection of machine safety labels meet these standards.
These qualities outperform the basic adhesive vinyl labels produced by some manufacturers. Those labels have a service temperature range of up to 180°F and will only last outside for 3 or 4 years.
Non UL® Recognized labels cannot withstand the same type of chemical or abrasion exposure that a UL® Recognized polyester label can.
By using UL® Recognized polyester labels for your needs, you are ensuring that you will have a label that will last and won’t need to be replaced as often as those from other manufacturers.
These signs are made of a beaded material that resists fading and will not chip, crack, or rust. Signs manufactured with this material can last up to 7 years and service temperatures ranging from -40°F to 200°F. Our signs are highly resistant against the extremes of hot, cold, dry, and humid weathering conditions. Graphics on these signs will resist fading and mild chemicals.
Graphics are printed using any of the following printing methods: translucent inks (screen printing), applied vinyl graphics and/or thermal transfer (digital printing); translucent ink or film does not apply to the color black.
Printed image will resist fading and mild chemicals.
Material Flexibility: Conform to either curved or flat surfaces
Outdoor Durability: up to 7 years (except orange)
Service Temp Range: -40°F to 200°F
Min. Application Temp: 50° F
Surface Preparation: Clean and Dry
Antigraffiti Overlamination: Available at an additional cost, see options below.
Back Adhesive: Yes
Why UL 969 Labels Are Important
Proven Compliance & Liability Protection
UL 969 certification confirms the label meets rigorous durability and legibility standards recognized by safety regulators, reducing liability exposure for your customers.
Durability Built for Industrial Environments
The protective overlaminate resists abrasion, moisture, UV exposure, and chemicals — ensuring warnings remain legible throughout the product's service life, even in harsh conditions.
Supports Multi-Standard Compliance
Meets ANSI Z535 / OSHA requirements while also satisfying LEED, RoHS, CA Prop 65, REACH SVHC, and ECCN — a single label solution for customers with complex compliance.
Permanent Adhesive Performance
High-performance pressure-sensitive adhesive bonds permanently to industrial surfaces, eliminating the risk of labels peeling, shifting, or failing in the field.
Trusted by OEM & Safety Professionals
UL® Recognized marking signals quality to procurement teams, safety officers, and OEM customers who require verified materials for regulated labeling applications.
Compliance Certifications
UL® Recognized (UL 969)
ANSI Z535 / OSHA
RoHS Compliant
LEED Compliant
California Proposition 65
REACH SVHC Compliant
RCCN Certified
Additional Features
Material Construction: 4-layer overlaminated construction — Clear Protective Overlaminate / 2 Mil White Polyester / Hi-Performance Permanent Pressure-Sensitive Adhesive backing / Polycoated Release Liner