SOLAR PV SYSTEM SHUTDOWN LABEL
Item #
N1003-AA
Label Reads
Solar PV System Equipped with Rapid Shutdown Turn Rapid Shutdown Switch to the "Off" Position to Shut Down PV System and Reduce Shock Hazard in Array
Label Design
Building with Roof Diagram
Compliance
NEC 2026 690.12(D)

Other configurations of this product are UL® Recognized (UL 969).

SOLAR PV SYSTEM SHUTDOWN LABEL

Complies with NEC 2026

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$20.60
Low Price Guarantee
Pkgs
Each
Per Label
  • 1–2
    $20.60
    ($4.12/ea)
  • 3–4
    $18.52
    ($3.70/ea)
  • 5–9
    $17.58
    ($3.52/ea)
  • 10–19
    $16.75
    ($3.35/ea)
  • 20–39
    $15.91
    ($3.18/ea)
  • 40+
    $15.10
    ($3.02/ea)

Your item has been added to cart.

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 973‑405‑2672.

Product Information

Details

Service equipment label reading "Solar PV System Equipped with Rapid Shutdown — Turn Rapid Shutdown Switch to the 'Off' Position to Shut Down PV System and Reduce Shock Hazard in Array," with a building and roof diagram showing the array boundary. Yellow and white background with black lettering, sized to meet NEC 690.12(D) service-equipment marking requirements and give first responders a clear visual reference for locating and operating the rapid shutdown initiator. Service equipment label with the required rapid shutdown wording and a building and roof diagram showing the array, giving responders a clear reference for locating and operating the shutdown switch.

Features:

  • “Solar PV System Equipped with Rapid Shutdown” with operating instructions
  • Building and roof diagram

Sizes: 5" x 3½"

Materials: Vinyl · Polyester

Placement & use: Apply at the service equipment or another visible location approved by the AHJ. Install at final installation, before the rapid shutdown inspection.

Compliance: NEC 2026 690.12(D) · UL® Recognized on polyester

Specifications:

  • MATERIAL: Vinyl / Polyester
  • CONSTRUCTION: Outdoor-rated solar label material with protective overlaminate where applicable
  • OUTDOOR RATED: Yes
  • UV STABILITY: Designed for outdoor solar and electrical labeling applications
  • ADHESIVE: Permanent pressure-sensitive adhesive
  • BEST USE: Solar circuit labels, PV warning labels, electrical panels, disconnects, raceways, combiner boxes, inverters, and service equipment
  • APPLICATION SURFACE: Clean, dry, properly prepared equipment surfaces
  • PRODUCT TYPE: Solar warning label
  • CODE USE: Photovoltaic and electrical system identification
  • Labeling Requirements

Label Material: 3.5 Mil Adhesive Backed Vinyl Film:

  • 3.5 mil thick flexible vinyl film coated with an aggressive permanent acrylic adhesive.
  • Graphics are digital or screen printed with UV inks.
  • Vinyl signs are the most economical option available. A favorite material for indoor application.
  • Printed image will resist fading and mild chemicals.
  • Outdoor Durability: 3 to 4 years
  • Material Flexibility: Conform to either curved or flat surfaces
  • Service Temp Range: -40°F to 180°F
  • Min. Application Temp: 50° F
  • Surface Preparation: Clean and Dry
  • Ink Features: Printed with UV Inks
  • Printing Process: Digital or Screen
  • Back Adhesive: Yes

2 Mil UL® Recognized White Polyester w/ Clear Overlam

  • SafetySign.com is always looking for ways to provide customers with better signage options. To provide you with labels that last longer in harsh environments, we manufacture UL® Recognized polyester labels.
  • These UL® Recognized labels are superior to other labels because they perform better and last longer in tough environments.
Material Service Temperatures Lifespan
UL® Recognized Polyester -40°F to 302°F 5-8 years
Basic vinyl material 40°F to 180°F 3-4 years
  • These labels have a service temperature range of -40°F to 302°F and an outdoor durability of 5 to 8 years. They resist extreme heat, chemicals, and abrasion. Most of our selection of machine safety labels meet these standards.
  • These qualities outperform the basic adhesive vinyl labels produced by some manufacturers. Those labels have a service temperature range of up to 180°F and will only last outside for 3 or 4 years.
  • Non UL® Recognized labels cannot withstand the same type of chemical or abrasion exposure that a UL® Recognized polyester label can.
  • By using UL® Recognized polyester labels for your needs, you are ensuring that you will have a label that will last and won’t need to be replaced as often as those from other manufacturers.

Engineering Grade (EG) Reflective (Adhesive Backed Vinyl)

  • These signs are made of a beaded material that resists fading and will not chip, crack, or rust. Signs manufactured with this material can last up to 7 years and service temperatures ranging from -40°F to 200°F. Our signs are highly resistant against the extremes of hot, cold, dry, and humid weathering conditions. Graphics on these signs will resist fading and mild chemicals.
  • Graphics are printed using any of the following printing methods: translucent inks (screen printing), applied vinyl graphics and/or thermal transfer (digital printing); translucent ink or film does not apply to the color black.
  • Printed image will resist fading and mild chemicals.
  • Material Flexibility: Conform to either curved or flat surfaces
  • Outdoor Durability: up to 7 years (except orange)
  • Service Temp Range: -40°F to 200°F
  • Min. Application Temp: 50° F
  • Surface Preparation: Clean and Dry
  • Antigraffiti Overlamination: Available at an additional cost, see options below.
  • Back Adhesive: Yes

Why UL 969 Labels Are Important

Proven Compliance & Liability Protection UL 969 certification confirms the label meets rigorous durability and legibility standards recognized by safety regulators, reducing liability exposure for your customers.
Durability Built for Industrial Environments The protective overlaminate resists abrasion, moisture, UV exposure, and chemicals — ensuring warnings remain legible throughout the product's service life, even in harsh conditions.
Supports Multi-Standard Compliance Meets ANSI Z535 / OSHA requirements while also satisfying LEED, RoHS, CA Prop 65, REACH SVHC, and ECCN — a single label solution for customers with complex compliance.
Permanent Adhesive Performance High-performance pressure-sensitive adhesive bonds permanently to industrial surfaces, eliminating the risk of labels peeling, shifting, or failing in the field.
Trusted by OEM & Safety Professionals UL® Recognized marking signals quality to procurement teams, safety officers, and OEM customers who require verified materials for regulated labeling applications.

Compliance Certifications

  • UL® Recognized (UL 969)
  • ANSI Z535 / OSHA
  • RoHS Compliant
  • LEED Compliant
  • California Proposition 65
  • REACH SVHC Compliant
  • RCCN Certified
  • UL 969 layers
  • UL 969 lifestyle

Additional Features

  • Material Construction: 4-layer overlaminated construction — Clear Protective Overlaminate / 2 Mil White Polyester / Hi-Performance Permanent Pressure-Sensitive Adhesive backing / Polycoated Release Liner
  • Temperature Range: -40°F to 302°F
  • Suitable for: Painted metals, bare metals (aluminum, galvanized steel, stainless steel), glass, thermoplastics, thermoset plastics
  • Application Method: Pressure-sensitive — apply with firm uniform pressure for complete surface contact
  • Intended Applicator: Manufacturers, at place of manufacture — for use as component of complete equipment
  • Life Expectancy- 5-8 years mid-continental United States
  • Minimum Application Temperature: 50°F

Reviews

800‑274‑5271
Cart

Your cart is empty.