LED Solar Do Not Enter Sign
  • LED Solar Do Not Enter Sign
  • LED Solar Do Not Enter Sign
  • LED Solar Do Not Enter Sign
  • LED Solar Do Not Enter Sign
Item #
Y5219-30SEG
Led Signs Reads
Do Not Enter
Compliance
MUTCD R5-1

Note:

Flashing LED lights operate 24/7 and are powered by a self-contained battery system, allowing them to run for up to 48 hours (2 days) without sunlight.

Data Sheet

LED Solar Do Not Enter Sign

Complies with MUTCD R5-1

Standard Sign Type: LED Do Not Enter Sign

Also Available:

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$1,000.00
Low Price Guarantee

Your item has been added to cart.

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 800‑274‑5271 or email us.

Recommended Accessories

Frequently Purchased Together

Product Information

Details

Our LED Solar Do Not Enter Sign is a crucial safety sign that clearly directs drivers to avoid entering restricted areas or one-way streets. The bright LED lights always ensure high visibility, while the durable materials provide lasting performance in various conditions.

LED Solar Do Not Enter Sign
  • The LED Solar Do Not Enter Sign is designed for installation on both new and existing poles.
  • Sign comes in various sizes and reflective grades to suit your specific needs.
  • MUTCD Compliant.
  • LED flashing operates 24/7.
  • Flashing LEDs enhance safety at intersections by increasing driver awareness of traffic control signs.
  • Improved visibility both during the day and at night.
  • With its adjustable tilting solar panel, it charges in just 6-8 hours and provides up to 48 hours of continuous use.
  • Easily monitor the battery percentage digitally to stay informed about when a recharge is needed.

Note: 36" square signs feature four 3/8" mounting holes, designed to be installed on two sign posts.

  • Back Controller Square

Solar Panel Unit and LED Specifications
Modes 24/7 Flash or Flash from Dusk to Dawn
Battery 12V 7,500 mAh Rechargeable Lithium-Ion Battery
Battery Life 6-8 hours to fully charge / up to 48 hours of use
Solar Panel 18V 13W
LEDs 8 LEDs (0.5W each)
LED Colors White
Reflective Grades EG, HIP, DG

LED Solar Do Not Enter Sign

Step by Step Installation Provided Below:

  • LED Stop Sign Hardware
    1. Secure the sign to the post using
    the provided mounting bolts.
  • LED Stop Sign Hardware
    2. Position the bracket and screw for
    the solar panel in their designated locations.
  • LED Stop Sign Hardware
    3. Use a socket wrench to adjust the
    bracket's angle, then tighten the screw securely.
  • LED Stop Sign Hardware
    4. Align the solar panel with the bracket,
    then place the solar panel into position.
  • LED Stop Sign Hardware
    5. Use an Allen key to tighten the two
    set screws, securing the solar panel to the bracket.
  • LED Stop Sign Hardware
    6. Connect the cable from the solar panel
    to the cable from the battery.
  • LED Stop Sign Hardware
    7. Turn the orange key on the battery to
    switch between functions: Off, 24/7 flashing,
    and night mode (dusk to dawn) flashing.
  • LED Stop Sign Hardware
    8. Press the small button next to the
    digital display to check the battery charge.
    The first press shows the battery percentage,
    the second displays the voltage (100% = 12.5V),
    and the third press turns off the display.

Reviews

800‑274‑5271
Cart

Your cart is empty.

Chat