We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Breaker Location Label
- Item #:
- Label Reads:
- Breaker Location Panel No: _______ Breaker No: ______
Other configurations of this product
- LEED Compliant
1½ × ¾″
|3.5 Mil Peel and Stick Vinyl Label||Sold in Packages of 100 - 10 labels per sheet, 10 sheets||E3367||$14.45||$13.65||$12.35|
ELECTRICAL MINI-DECALS (10 per Card)
- Labels are digitally or screen printed with UV inks
- Adhesive Backed Vinyl labels are supplied with round corners only.
- Before applying, surface must be clean, oil free and dry.
- Labels do not have any overlamination.
- Labels are easy to write on with pen or permanent marker.
- Mini-Labels are supplied in cards of 10 labels, 10 cards per package.
- Labels have been die cut, making it easy to peel off and apply.
|Available Materials||Corner Radius||Diagram|
|1½ × ¾″||1½″||¾″||5/32″||Up to 3′ 11″||
|Material||Thickness||Outdoor Durability||Service Temp. Range||Available
|Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F.||3.5 mils||4 to 5 Years||-20° to 176° F||
|None||Engineering Grade||High Intensity Prismatic||Diamond Grade|
|ATSM D956 Type||–||Type I||Type IV||Type IX|
|Brightness||–||Standard Material||3x More||10x More|
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
The text is printed in Arial Black font.
The Breaker Location Label from SafetySign.com uses this font to create a bold message that stands out in order to grab your attention, while also remaining clearly legible at the maximum safe viewing distance of the product.