We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Bilingual Danger Safety Equipment Must Be Worn Sign
- Item #:
- E1379BI
- Sign Reads:
- Danger Confined Space Proper Safety Equipment Must Be Worn While Preforming A Rescue. / Peligro Espacio Confinado. Utiliza … See Full Text
- Sign Design:
- International Mandatory Wear A Safety Harness And International Mandatory Face Mask/Respirator Symbols
- Language:
- Bilingual (English/Spanish). Also available in English or Spanish.
- Compliance:
-
- ANSI Z535 / OSHA
- OSHA 1910.1200(c)
- Shipping Declarations
- LEED Compliant
- ECCN Certification
Other configurations of this product
This Bilingual Danger Safety Equipment Must Be Worn Sign uses official ANSI headers for safety protocol and compliance. A Bilingual Danger Safety Equipment Must Be Worn Sign is a useful tool to help protect the health and safety of personnel, but is not a substitute for required protective measures for eliminating or reducing hazards.
Preview:
Need another language?
Write your own translation. Custom pricing will apply.
Design Your Own Sign
Danger Confined Space Proper Safety Equipment Must Be Worn While Preforming A Rescue. / Peligro Espacio Confinado. Utilizar El Equipo De Seguridad Apropiado Cuando Se Efectua Un Rescate.
|
5 × 7″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| 3.5 Mil Peel and Stick Vinyl Label | N/A | N/A | E1379BI-B3L | $4.75 | $4.15 | $3.65 | $3.45 | $3.25 | $3.00 | ||
|
7 × 10″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | E1379BI-FB | $12.15 | $11.90 | $11.35 | $10.75 | $8.95 | $8.25 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | E1379BI-BB | $7.50 | $7.25 | $7.10 | $6.85 | $6.45 | $5.45 | ||
| .040″ Engineering Grade Reflective Aluminum | None | Four 7/32″ holes (one in each corner) | E1379BI-R2B | $13.15 | $12.85 | $12.30 | $11.25 | $10.00 | $8.60 | ||
| 3.5 Mil Peel and Stick Vinyl Label | N/A | N/A | E1379BI-AB | $7.15 | $6.80 | $6.35 | $5.75 | $4.75 | $4.05 | ||
|
10 × 14″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | E1379BI-FC | $19.10 | $18.05 | $15.75 | $15.25 | $14.30 | $12.00 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | E1379BI-BC | $10.75 | $10.30 | $9.75 | $9.25 | $7.75 | $6.50 | ||
| .040″ Engineering Grade Reflective Aluminum | None | Four 7/32″ holes (one in each corner) | E1379BI-R2C | $19.95 | $19.20 | $16.75 | $16.25 | $15.75 | $12.25 | ||
| 3.5 Mil Peel and Stick Vinyl Label | N/A | N/A | E1379BI-AC | $10.40 | $9.25 | $8.95 | $8.25 | $7.45 | $6.25 | ||
|
12 × 18″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .063″ White Rust-Free Aluminum | None | Four ¼″ holes (one in each corner) | E1379BI-A8C | $21.20 | $19.75 | $18.95 | $18.30 | $17.75 | $16.50 | ||
| .055″ Polyethylene Plastic | None | Four ¼″ holes (one in each corner) | E1379BI-A85 | $18.65 | $15.95 | $15.25 | $14.95 | $14.50 | $13.50 | ||
| .063″ Engineering Grade Reflective Aluminum | None | Four ¼″ holes (one in each corner) | E1379BI-A8D | $23.45 | $22.50 | $21.60 | $20.50 | $19.45 | $18.50 | ||
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
Max Recommended
Viewing Distance*
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
* Under favorable viewing conditions.
Recommended Accessories
- All
- Brackets
- Cones
- Foam Bumpers
- Hardware
- Tape
- Ties
- Tools
8" Long Heavy Duty Nylon Ties
NT8
7.5″ Black UV Resistant Cable Tie - 50 lb Tensile Strength
NT7
SignGuardian™ Tamper-Resistant 2" Chain Link Fence Brackets for 7/32” or 1/4" Mounting Holes
Y4963, Y4962
Screwdriver for SignGuardian™ and 1-Way R™ Bolts
Y4965
#10 x 1-1/2" Round Head Screw for Wood
Y4999
3/16 x 1-1/2" Bolting Set (2 bolts, 2 nuts, 4 washers)
Y4997
Corner Foam Bumper
R5600
I-Beam Edge Foam Bumper
R5601
Flat Surface Foam Bumper
R5602
Corner Protector For Foam Bumper
R5604
42" Cone with Reflective Bands and 16lb. Base
X5653
Suction Cups with Hook For Sign Hanging
Y3548
Double-Sided Adhesive Foam Tape
Y3549
Wing Bracket
Y3539
5/32" Cushioned T-Handle Hex Key
Y3522
5/32" L-Handle Hex Key
Y3523
L-Handle Hex Key For Vandal Resistant Set Screws
Y3524
5/32" Hex Bit For Vandal Resistant Set Screws
Y3525
Vandal Resistant Set Screws
Y3526
30" Silver Yard Sign Stake
Y4995
Confined Spaces – A Brief Overview
What is a Confined Space?
OSHA defines a confined space (non-permit and permit-required) as a space that is:
(1) Large enough for an employee to enter and perform work
(2) Has limited or restricted means for entry or exit
(3) Is not designed for continuous occupancy
What is the difference between a "permit-required" and "non-permit" confined space?
| Permit-Required Confined Spaces | Non-Permit Confined Spaces |
|
| Contains or has the potential to contain a hazardous atmosphere | ||
| Contains a material that has the potential for engulfing an entrant | ||
| Could trap or asphyxiate an entrant with inwardly converging walls | ||
| Could trap or asphyxiate an entrant with a floor that slopes downward and tapers to a smaller cross-section | ||
| Contains any other recognized serious safety or health hazard | ||
| Contains hazards capable of causing death or serious physical harm |
From the chart above we can see that permit-required confined spaces can be extremely dangerous for workers, while non-permit confined spaces are not considered life-threatening. This doesn't mean precautionary steps shouldn't be taken before entering a non-permit space. Safety is essential no matter what the conditions are and because there is still the possibility of an injury occurring, only authorized personnel should enter the space.
OSHA states that if the workplace contains permit spaces, the employer shall inform exposed employees by posting danger signs, or by any other equally effective means, making them aware of the existence, location of, and the danger posed by the permit spaces.
Here are some examples of signs from SafetySign.com that would meet the requirements from OSHA:
Signs for Permit Required Confined Spaces
Signs for Non-Permit Confined Spaces
For more information about confined spaces please visit our help center.
SafetySign.com does not recommend or specify the use of a specific safety sign because it does not have knowledge of the hazard(s) our customers are identifying. It is the customer’s sole responsibility to identify the hazard(s) that may be present and select one or more signs (stock or custom) that accurately identify their specific hazard(s) and complies with any applicable federal, state or local laws or regulations, any worksite specific rules or regulations and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). SafetySign.com disclaims any and all liability (excluding liability for our Product Warranty contained in our Terms and Conditions) for any sign selected by a customer and shall not be responsible for any personal injury or property damage resulting from the use of signs purchased from it or for the independent interpretation made of any applicable federal, state or local laws or regulations, any worksite specific rules or regulations, and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). Customer shall indemnify and hold SafetySign.com and its corporate parent and its officers, directors and affiliates harmless from and against any and all claims, loss or expense (including attorneys’ fees) arising from or related to the purchase and use by customer or any third party of any sign purchased by customer from SafetySign.com.
| Size | Width | Height | Average Text Size |
Max Viewing Distance |
Available Materials | Mounting Holes | Corner Radius | Diagram |
|---|---|---|---|---|---|---|---|---|
| 5 × 7″ | 5″ | 7″ | 0.15″ | Up to 3′ 9″ |
|
N/A | ¼″ | Diagram |
| 7 × 10″ | 7″ | 10″ | ¼″ | Up to 6′ 3″ |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram | |||||
| 10 × 14″ | 10″ | 14″ | 0.35″ | Up to 8′ 9″ |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram | |||||
| 12 × 18″ | 12″ | 18″ | ½″ | Up to 12′ 6″ |
|
Four ¼″ Holes (#12 or 7/32″ screws recommended) | ½″ | Diagram |
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z535.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
| Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
Overlaminate |
|---|---|---|---|---|---|
| Labels | |||||
| Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. | 3.5 mils | 4 to 5 Years | -20° to 176° F |
|
N/A |
| Plastic | |||||
| Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures. | 0.055″ | 3 to 5 Years | -40° to 180° F |
|
N/A |
|
|
||||
| Aluminum | |||||
| Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. | 0.04″ | 5 to 7 Years | -40° to 212° F |
|
|
| 0.063″ | 5 to 7 Years | -40° to 212° F |
|
|
|
|
Engineering Grade Reflective Aluminum
A durable enclosed lens retro-reflective material permanently adhered to aluminum. It is an economical choice for non-critical traffic signs, parking lot signs, and safety signs. The pattern free face allows for clean graphic imaging. It meets the requirements of ASTM D4956 Type I, and will remain effective for up to 7 years. Resistant to fading and mild chemicals.
Reflectivity:
|
0.04″ | Up to 7 Years | -10°F - 130°F |
|
|
| 0.063″ | Up to 7 Years | -10°F - 130°F |
|
|
|
| None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
|---|---|---|---|---|
| ATSM D956 Type | – | Type I | Type IV | Type IX |
| Brightness | – | Standard Material | 3x More | 10x More |
| Night-Time Visibility | – | 500' | 1,000' | 1,500' |
| Reflectivity |
|
|
|
|
This Bilingual Danger Safety Equipment Must Be Worn Sign is printed with the latest digital printing practices, which reduce set-up times and allows SafetySign.com to ship out faster than competitors. These advanced printing processes also eliminate set-up charges and order minimums. At SafetySign.com, we print your text and graphics with UV inks directly to the substrate, without lamination. Your text and graphics won't peel, unlike a Bilingual Danger Safety Equipment Must Be Worn Sign from companies that laminate graphics over the sign material.
Printing Methods
Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
Fonts
The text is printed in Arial Black and Arial Bold fonts.
The Bilingual Danger Safety Equipment Must Be Worn Sign from SafetySign.com uses these fonts to create a distinct primary message grabs your attention first, and bold secondary message that also stands out and remains clearly legible.
