We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Bilingual Cold Holding Temperatures Sign
- Item #:
- D5873
- Label Reads:
- Cold Holding Temperatures - Temperaturas Para Mantener Frio (Thermometer Chart Shows:) 41 Degrees Fahrenheit And 5 Degrees … See Full Text
- Label Design:
- Thermometer Symbol With Prohibition Symbol In Unacceptable Temperature Range And Check Marks In Acceptable Temperature Range
- Compliance:
-
- LEED Compliant
- ECCN Certification
- OSHA 1910.1200(c)
- Shipping Declarations
Other configurations of this product
A Bilingual Cold Holding Temperatures Sign has informational messages for safety protocol and compliance. A Bilingual Cold Holding Temperatures Sign is a helpful resource to help protect the health and safety of personnel, and is not a substitute for required protective measures for reducing or eliminating hazards.
This made-to-order product is manufactured on-demand to address COVID-19 signage requirements. It can be returned only if defective per our custom product return policy.
COVID-19 Signs
See our most popular products below or browse our full selection of COVID-19 signs. 7,000+ products to choose from. Curbside pickup signs, occupancy signs, temperature-check signs, and more.
-
Keep your employees, customers, and visitors safe with proper social distancing signs.
-
Follow the CDC guidelines. Require customers, visitors, and personnel to wear a face mask.
-
Encouraging frequent and proper hand-washing is one of the best ways to prevent the spread of the virus.
-
Choose from product collections selected for use in restaurants, retail, offices, manufacturing, and more.
Cold Holding Temperatures - Temperaturas Para Mantener Frio (Thermometer Chart Shows:) 41 Degrees Fahrenheit And 5 Degrees Celsius Are Acceptable Cold Holding Temperature
|
7 × 10″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | D5873-FB | $12.15 | $11.90 | $11.35 | $10.75 | $8.95 | $8.25 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | D5873-BB | $7.50 | $7.25 | $7.10 | $6.85 | $6.45 | $5.45 | ||
| 3.5 Mil Peel and Stick Vinyl Label | N/A | N/A | D5873-AB | $7.15 | $6.80 | $6.35 | $5.75 | $4.75 | $4.05 | ||
|
10 × 14″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | D5873-FC | $19.10 | $18.05 | $15.75 | $15.25 | $14.30 | $12.00 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | D5873-BC | $10.75 | $10.30 | $9.75 | $9.25 | $7.75 | $6.50 | ||
| 3.5 Mil Peel and Stick Vinyl Label | N/A | N/A | D5873-AC | $10.40 | $9.25 | $8.95 | $8.25 | $7.45 | $6.25 | ||
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
Max Recommended
Viewing Distance*
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
* Under favorable viewing conditions.
Recommended Accessories
- All
- Hardware
- Tape
- Ties
| Size | Width | Height | Average Text Size |
Max Viewing Distance |
Available Materials | Mounting Holes | Corner Radius | Diagram |
|---|---|---|---|---|---|---|---|---|
| 7 × 10″ | 7″ | 10″ | ⅜″ | Up to 9′ 4″ |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram | |||||
| 10 × 14″ | 10″ | 14″ | ¾″ | Up to 18′ 9″ |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram |
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z535.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
| Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
Overlaminate |
|---|---|---|---|---|---|
| Labels | |||||
| Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. | 3.5 mils | 4 to 5 Years | -20° to 176° F |
|
N/A |
| Plastic | |||||
| Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures. | 0.055″ | 3 to 5 Years | -40° to 180° F |
|
N/A |
| Aluminum | |||||
| Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. | 0.04″ | 5 to 7 Years | -40° to 212° F |
|
|
| None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
|---|---|---|---|---|
| ATSM D956 Type | – | Type I | Type IV | Type IX |
| Brightness | – | Standard Material | 3x More | 10x More |
| Night-Time Visibility | – | 500' | 1,000' | 1,500' |
| Reflectivity |
|
|
|
|
This Bilingual Cold Holding Temperatures Sign is printed with the latest digital printing practices, which reduce set-up times and allows SafetySign.com to ship out faster than competitors. These advanced printing processes also eliminate set-up charges and order minimums. At SafetySign.com, we print your text and graphics with UV inks directly to the substrate, without lamination. Your text and graphics won't peel, unlike a Bilingual Cold Holding Temperatures Sign from companies that laminate graphics over the sign material.
Printing Methods
Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
Fonts
The text is printed in Franklin Gothic font.
The Bilingual Cold Holding Temperatures Sign from SafetySign.com uses this font because it works well for both large and small text, and provides a clear, legible message. We use this font on a wide variety of signs for the workplace, and on numerous parking signs.
