We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
3-Way AED Sign
A 3-Way AED Sign has safety messages for emergency response protocol and compliance. A 3-Way AED Sign is a useful tool to help protect the health and safety of staff, and is not a substitute for necessary protective measures for lessening or eliminating hazards.
AED Automated External Defibrillator
|
Two 8 × 10″ Panels with 1″ Flanges on Sides
|
||||||
|---|---|---|---|---|---|---|
| Material | Mounting Holes | Sku | Quantity/Price | |||
|
||||||
| .060″ Polystyrene Plastic | Four 7/32″ holes (one at top of each flange, one at bottom of each flange) | D4639 | $33.85 | $30.45 | $27.55 | |
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
Max Recommended
Viewing Distance*
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
* Under favorable viewing conditions.
Which Size Sign Should I Choose?
The 3-Way AED Sign is offered in the size shown in the table below. Use the data in the table to help you decide if the size of this 3-Way AED Sign will meet your requirements.
![]()
| Size | Width | Height | Depth | Average Text Size |
Max Viewing Distance |
Available Materials | Mounting Holes | Diagram |
|---|---|---|---|---|---|---|---|---|
| Two 8 × 10″ Panels with 1″ Flanges on Sides | 12½″ | 10″ | 4¾″ | ⅜″ | Up to 9′ 4″ |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | Diagram |
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z353.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
| Material | Thickness | Outdoor Durability | Available Sizes |
|---|---|---|---|
| Polystyrene Plastic Polystyrene is a low weight, high impact resistant plastic that is rust-free, chip and crack resistant, and is ideal for many applications. | 0.06″ | 1 to 2 Years |
|
| None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
|---|---|---|---|---|
| ATSM D956 Type | – | Type I | Type IV | Type IX |
| Brightness | – | Standard Material | 3x More | 10x More |
| Night-Time Visibility | – | 500' | 1,000' | 1,500' |
| Reflectivity |
|
|
|
|
3-Way Wall Projecting Signs
How and where do you mount 3-Way signs?
3-Way signs can be mounted on any flat surface. These signs are supplied with 4 holes at 0.218" in diameter, for permanent mounting.
Signs contain 2 panels printed with the same information.
3-way signs offer 180° visibility.
The purpose of a 3-Way sign is to alert incoming and/or outgoing traffic, at the same time, of any hazardous conditions in the area, the required safety precautions to be taken when entering the area, location of safety equipment or emergency exits, etc.
- Signs are printed with digital or silk screening UV inks on .060 thick Polystyrene (High Impact Plastic).
- Polystyrene is a rust free, chip and crack resistant plastic.
- These signs have been designed for the following applications: walls or any flat surface.
- Signs do not have any overlamination.
- Image / Text on sign is printed directly onto the plastic.
What do you need to know about Safety Signs:
Environmental & facility safety signs are usually larger because they are observed at further distances. These signs usually contain lesser amounts of information for visual clarity at a distance. Signs should be placed in a clearly visible location and should be protected from damage and obliteration.
- When safety signs are distinguished by their color code (ANSI Z535.2) they become useful tools to help protect the health and safety of personnel at the workplace.
- Safety signs are a supplement to, and NOT a substitute for, the required protective measures for eliminating or reducing the hazards in the workplace.
- Reading and understanding safety signs displayed on machinery or around your facility will help minimize the possibility of accidents and increase hazard awareness.
Safety Sign Functions & Objectives are:
- The objective of safety signs is to draw attention rapidly and precisely to objects and situations capable of causing specific injuries or accidents.
- To alert or warn personnel about workplace hazards of which they may not be aware of.
- To restrict access to areas that present dangerous conditions.
- To inform people of safety requirements.
- Provide general information and directions.
- Remind employees where PPE equipment must be worn.
- Show where emergency equipment or exits are located.
- Indicate where certain actions are prohibited.
Safety Sign Recommended Viewing Distances
ANSI Z535-2007 standard uses a ratio of 25 ft of viewing distance per inch of text for Favorable Reading Conditions, and a ratio of 12 ft of viewing distance per inch of text for Unfavorable Reading Conditions.
Determining the safe viewing distance of a sign depends upon many factors: lighting, background, type font and visual acuity. Other factors to consider in determining sign size include: the complexity of the message, the reaction time necessary and the angle the sign will be seen from. In many situations it is better to use multiple smaller signs that are strategically positioned than one large sign.
SafetySign.com prints your 3-Way AED Sign directly onto the substrate without lamination using UV inks. Your sign will not peel, unlike signs from companies that laminate graphics over the sign material, and are resistant to fading and mild chemicals. This 3-Way AED Sign is printed using the latest digital printing technologies and processes, which greatly reduces set-up time, allowing for your 3-way sign to print quickly without set-up charges or minimums.
Printing Methods
Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
Fonts
The text is printed in Swis721BlkCn BT font.
The 3-Way AED Sign from SafetySign.com uses this font because it is legible, and makes the message stand out and command your attention.
