Stainless Steel Flared Leg Brackets - Y3530, Sign Mounting Hardware

Stainless Steel Flared Leg Brackets

Stainless Steel Flared Leg Brackets
Item #
Y3530-SSFL

Size:

Material:

Laminate:

Mounting:

Packaging:

Pkgs
Each
Per Strapping Bracket
1+
5.95
(2.98/ea)
Price: 5.95
0 In Stock
Special freight arrangements are necessary. Learn More.

Need a quote for a large order? Call 800-274-6271 or email us.

The Stainless Steel Flared Leg Bracket is used to mount signs with 3/8" mounting holes to bands of stainless steel strapping. These brackets are meant for use on poles larger than 4" in diameter and each bracket has a threaded hole for the included 5/16" hex head bolt. These stainless steel flared leg brackets are sold as a package of 2 brackets with 2 hex head bolts and 2 washers.

Product Information

Details

Stainless Steel Flared Leg Brackets

The Stainless Steel Flared Leg Bracket is used to mount signs with ⅜″ mounting holes to bands of stainless steel strapping. Use on poles larger than 4″ in diameter.

Flared leg bracket for use with 3/4″ S.S. strapping
Mounted flared leg bracket

Installation

Installation steps:

  • Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
  • Insert one end of the strapping into your straight or flared leg sign mounting bracket.
  • Insert the same end into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
  • Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
  • Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
  • Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
  • Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping.
  • Repeat these steps to install the second band of strapping.
  • At last, proceed to install the sign onto the brackets, using the hardware provided (1 hex head bolt and 1 washer each).
Strapping being inserted into the buckle
Strapping being inserted into the buckle
Strapping being inserted into wing seal
Strapping being inserted into wing seal
The other end of the strapping being inserted and bent to hold it in place
The other end of the strapping being inserted and bent to hold it in place
Strapping tool Y3532 tightening the strapping around the pole
Strapping tool Y3532 tightening the strapping around the pole
Strapping tool Y3533 tightening the strapping around the pole
Same process with a different tool Y3533 tightening the strapping around the pole
Using either the Spinner or Ratchet tool cut the excess strapping
Using either the Spinner or Ratchet tool cut the excess strapping
Extra strapping left over to be sealed under buckle or wing seal
Extra strapping left over to be sealed under buckle or wing seal
Bend the strapping over the buckle or wing seal to partially secure the strapping
Bend the strapping over the buckle or wing seal to partially secure the strapping
Wing seal or buckle being closed to secure the strapping
Wing seal or buckle being closed to secure the strapping
mounted sign bracket
Mounted sign bracket
Sign installation process using stainless strapping
Sign installation process
mounted sign using strapping
Mounted sign

Reviews

800-274-6271
Cart

Your cart is empty.