Custom Blank Square Safety Sign

Label Material: 3.5 Mil Adhesive Backed Vinyl Film

• 3.5 mil thick flexible vinyl film coated with an aggressive permanent acrylic adhesive.
• Graphics are printed using any of the following printing methods: screen printing and/or digital printing.
• Vinyl signs are the most economical option available. A favorite material for indoor application.
• Printed image will resist fading and mild chemicals.
• Outdoor Durability: 3 to 4 years
• Material Flexibility: Conform to either curved or flat surfaces
• Service Temp Range: -40°F to 180°F
• Min. Application Temp: 50° F
• Surface Preparation: Clean and Dry
• Ink Features: Printed with UV Inks
• Printing Process: Digital or Screen
• Sign Features: 1/4” Round Corners
• Back Adhesive: Yes

New Matte Polyester with Low-Tack Adhesive

• Designed for temporary applications of decals and graphics to most types of painted interior walls; this includes most flat, semi gloss and gloss paint finishes. These labels may also be applied to sealed wall coverings, glass, and clear acrylic.
• Apply to smooth, clean, dry, and even surfaces in excellent condition. Not for use outdoors or on carpet.
• Low-tack up to 6 months under normal interior exposure conditions and applications.
• Low-tack adhesive will not leave a residue when graphics are removed.
• Buyer should test for his/her intended use in a non-conspicuous area before installing.
• See examples of the Low-Tack Polyester applications below.

2 Mil Face-Adhesive Peel and Stick Polyester Label

Polyester labels made with 2 mils white polyester coated with an aggressive LEED compliant permanent acrylic pressure-sensitive adhesive that bonds well to glass surfaces.

Non-printed area is white. Shelf Life: Two years when stored at 70°F (21°C) and 50% relative humidity.

• Outdoor Durability:5 to 8 years
• Service Temp Range: -40°F to 302°F
• Min. Application Temperature: -50° F
• Surface Preparation: Clean & Dry
• Ink Features: Printed with UV Resistant Inks
• Printing Process: Digital or Screen Printing
• Over laminate: 1 Mil Clear Polyester
• Label Features: Round Corners and back-slit for easy installation.

Engineering Grade (EG) Reflective (Adhesive Backed Vinyl)

• These signs are made of a beaded material that resists fading and will not chip, crack, or rust. Signs manufactured with this material can last up to 7 years and service temperatures ranging from -40°F to 200°F. Our signs are highly resistant against the extremes of hot, cold, dry, and humid weathering conditions. Graphics on these signs will resist fading and mild chemicals.
• Graphics are printed using any of the following printing methods: translucent inks (screen printing), applied vinyl graphics and/or thermal transfer (digital printing); translucent ink or film does not apply to the color black.
• Printed image will resist fading and mild chemicals.
• Material Flexibility: Conform to either curved or flat surfaces
• Outdoor Durability: up to 7 years (except orange)
• Service Temp Range: -40°F to 200°F
• Min. Application Temp: 50° F
• Surface Preparation: Clean and Dry
• Antigraffiti Overlamination: Available at an additional cost, see options below.
• Sign Features: 1/4” Round Corners
• Back Adhesive: Yes

Label: Glow in the Dark (Photoluminous) Vinyl Film

• Glow in the dark material typically used in no light and low light applications, as well as emergency situations of power loss. Ideal to identify emergency exits and equipment. Signs will glow for 10 hours in continuous darkness. Material is charged by any light source in 15 to 60 minutes, depending on light intensity. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res. A.752 (18), JIS Z9100, NYC RS6-1.
• Glow in the dark material is a high performance polyester film.
• Printed image will resist fading and mild chemicals.
• Type of light source - cool white light sources, such as fluorescent lighting and sunshine, are excellent activators. Soft warm lighting, such as incandescent light bulbs, is at the lower activation end.
• Length of Illumination - at least 60 minutes of activation are recommended.
• Outdoor Durability: - Indoor use Only
• Service Temp Range: - 0°F to 122°F
• Min. Application Temp: - 50° F
• Surface Preparation: Clean and Dry
• Material Flexibility: Conform to either curved or flat surfaces
• Sign Features: 1/4” Round Corners
• Back Adhesive: Yes

Polyethylene Plastic

• Polyethylene is a rust free, chip and crack resistant plastic (in white or yellow) treated for digital and screen printing. Graphics are either digital or screen printed UV inks. Polyethylene signs are an economical alternative to aluminum signs, without significant compromise on durability.
• .055" thick plastic is typically used for safety signs up to 20 x 14"
• .125" thick plastic is typically used for property, parking and traffic signs, sizes range from 12 x 18" to 24 x 24"
• Graphics are printed using any of the following printing methods: screen printing or digital printing.
• Printed image will resist fading and mild chemicals.
• Inks: UV resistant inks used when printing
• Material Flexibility: .055" thick bends easily without causing material fractures, could be molded to fit certain surfaces.
• Outdoor Durability: 3 to 5 years (except red and orange)
• Service Temp Range: -40°F to 180°F
• Custom hole configuration: Available at an additional cost.

Rigid Material: Rust Free Aluminum

• Multiple thicknesses available, .040" for safety signs, .063" for outdoor signs and .080" for parking and traffic signs.
• Rust free aluminum signs usually coated white on both sides.
• Graphics are digital or screen printed with UV inks.
• Aluminum will not chip, crack or rust.
• Aluminum is one of the most durable material options offered, with excellent resistance to harsh weather conditions.
• Printed image will resist fading and mild chemicals.
• Outdoor Durability: 5 to 7 years
• Service Temp Range: -40°F to 212°F
• Ink Features: Printed with UV Inks
• Printing Process: Digital or Screen Printed
• Custom hole configuration: Available at an additional cost.
• Antigraffiti Overlaminate: Available at an additional cost.

Engineering Grade (EG) Reflective Aluminum

• These signs are made of a beaded material that resists fading and will not chip, crack, or rust. Signs manufactured with this material can last up to 7 years and service temperatures ranging from -40°F to 200°F. Our signs are highly resistant against the extremes of hot, cold, dry, and humid weathering conditions. Graphics on these signs will resist fading and mild chemicals.
• Rust free aluminum sheet over laminated with Engineering Grade Reflective Sheeting.
• Graphics are printed using any of the following printing methods: translucent inks (screen printing), applied vinyl graphics and/or thermal transfer (digital printing); translucent ink or film is not applicable to the color black
• Aluminum will not chip, crack or rust.
• Printed image will resist fading and mild chemicals.
• Outdoor Durability: up to 7 years (except orange)
• Service Temp Range: -40°F to 200°F
• Custom hole configuration: Available at an additional cost.
• Antigraffiti Overlaminate: Available at an additional cost.

Rigid Material: Glow in the Dark (Photoluminous) Aluminum

• Glow in the dark material typically used in no light and low light applications, as well as emergency situations of power loss. Ideal to identify emergency exits and equipment. Signs will glow for 10 hours in continuous darkness. Material is charged by any light source in 15 to 60 minutes, depending on light intensity. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res. A.752 (18), JIS Z9100, NYC RS6-1.
• Glow in the dark material is a high performance polyester film.
• .040 Rust free aluminum blank is over laminated with Glow in the dark (Photoluminous) Sheeting.
• Aluminum will not chip, crack or rust.
• Printed image will resist fading and mild chemicals.
• Type of light source - cool white light sources, such as fluorescent lighting and sunshine, are excellent activators. Soft warm lighting, such as incandescent light bulbs, is at the lower activation end.
• Length of Illumination - at least 60 minutes of activation are recommended.
• Outdoor Durability: Indoor use Only
• Service Temp Range: 0°F to 122°F
• Custom hole configuration: Available at an additional cost.
• Antigraffiti Overlaminate: Available at an additional cost.

High Intensity Prismatic (HIP) Reflective Aluminum

• Any sign laminated with this retro-reflective High Intensity Prismatic (Type III & IV) Reflective material is 3 to 4 times brighter than any Engineering Grade (EG) sign and can last up to 10 years outdoors. High Intensity Prismatic is the replacement material required by many State DOTs when posting new traffic signs. Our High Intensity Prismatic materials provide long-term reflectivity and durability. It has an outdoor life span of up to 10 years and a service temperature range of -40°F to 200°F.
• Graphics are printed using any of the following printing methods: translucent inks (screen printing), applied vinyl graphics and/or thermal transfer (digital printing); translucent ink or film is not applicable to the color black.
• Aluminum backing will not chip, crack or rust.
• Printed image will resist fading and mild chemicals.
• Outdoor Durability: 7 to 10 years (except orange)
• Service Temp Range: -40°F to 200°F
• Custom hole configuration: Available at an additional cost.
• Antigraffiti Overlaminate: Available at an additional cost.

3M™ Diamond Grade (DG) Reflective Aluminum

• 3M™ Diamond Grade™ (DG) (Type IX) Reflective Aluminum is 10 times more reflective than Engineering Grade (EG) sheeting, which makes it ideal for critical traffic signs at troubled intersections. 3M™ Diamond Grade reflective sheeting provides higher visibility than any other grade of reflective sheeting. It also meets specification ASTM D 4956-04, Type IX. 3M™ Diamond Grade™ Reflective Sheeting is a super-high efficiency, full cube retro reflective sheeting designed for signs that need to be highly visible in all light and weather conditions. It offers a clear, continuous visibility from all angles. This sheeting is designed to have the highest retro reflective characteristics at medium and short road distance. It has an outdoor life span of up to 10 years and a service temperature range of -40°F to 200°F.
• Graphics are printed using any of the following printing methods: translucent inks (screen printing), applied vinyl graphics and/or thermal transfer (digital printing); translucent ink or film is not applicable to the color black.
• Aluminum backing will not chip, crack or rust.
• Printed image will resist fading and mild chemicals.
• Outdoor Durability: 10+ years (except orange)
• Service Temp Range: -40°F to 200°F
• Custom hole configuration: Available at an additional cost.
• Antigraffiti Overlaminate: Available at an additional cost.

Jobsite Dress Code Clipart

Below are large representations of the jobsite clipart we offer, from 5 to 11 PPE types. Each item is labeled in both English and Spanish. Click on a specific image if you want to view it at its maximum size.

Protective Equipment – 5 Types
PPE 5 Symbol 01	PPE 5 Symbol 02	PPE 5 Symbol 03	PPE 5 Symbol 04

Protective Equipment – 6 Types
PPE 6 Symbol 01	PPE 6 Symbol 02	PPE 6 Symbol 03	PPE 6 Symbol 04
PPE 6 Symbol 05	PPE 6 Symbol 06

Protective Equipment – 7 Types
PPE 7 Symbol 01	PPE 7 Symbol 02	PPE 7 Symbol 03	PPE 7 Symbol 04
PPE 7 Symbol 05	PPE 7 Symbol 06

Protective Equipment – 8 Types
PPE 8 Symbol 01	PPE 8 Symbol 02	PPE 8 Symbol 03	PPE 8 Symbol 04
PPE 8 Symbol 05	PPE 8 Symbol 06

Protective Equipment – 9 Types
PPE 9 Symbol 01	PPE 9 Symbol 02	PPE 9 Symbol 03	PPE 9 Symbol 04
PPE 9 Symbol 05	PPE 9 Symbol 06	PPE 9 Symbol 07	PPE 9 Symbol 08

Protective Equipment – 10 Types
PPE 10 Symbol 01	PPE 10 Symbol 02	PPE 10 Symbol 03	PPE 10 Symbol 04
PPE 10 Symbol 05	PPE 10 Symbol 06	PPE 10 Symbol 07	PPE 10 Symbol 08

Protective Equipment – 11 Types
PPE 11 Symbol 01	PPE 11 Symbol 02	PPE 11 Symbol 03	PPE 11 Symbol 04