90 Degree Cross Piece For Street Name Sign
90 degree angle
- Item #
- OSHA 1910.1200(c)
- Shipping Declarations
The 90 Degree Cross Piece For Street Name Signs is a bracket designed to mount one street name sign above another at a 90 degree angle. The opening on the extruded blade bracket is 5/16" wide to accommodates the 1/4" thick extrusion of the extruded blade sign, and 3/16" wide on the flat blade bracket to accommodate .080" thick flat blade signs. Both openings are 7/8" deep.
5-1/2" and 12" wide brackets are available for purchase. The 5-1/2" bracket is ideal for 6" tall street signs with lengths up to 24", and the 12" bracket is best suited for all 9" tall street signs as well as 6" tall signs with lengths of 30" or more.
Each 90 Degree Cross Separator For Street Name Signs includes set screws for securing the signs to the bracket. No holes are required on the street name sign for installation. A 5/32" hex key is necessary to tighten these set screws.
Street Name Sign Bracket - 90° Cross Separator
The 90° cross separator is a bracket designed to mount one street name sign above another at a 90° angle. 5½″ and 12″ wide brackets are available to accommodate both small and large street name signs, as well as brackets for .080″ flat blade signs and extruded blade signs.
Tools required for installation:
- 5/32″ hex key