Flagger Symbol Roll-Up Sign
Item #
X4572-O36SB
Roll-Up Sign Design
Flagger Symbol
Compliance
  • Temporary Traffic Control Signs
  • NCHRP 350 Approved
  • MUTCD W20-7
Other configurations of this product are Flag Trees.

Note:

These lightweight signs are provided with a fiberglass crossbrace (1/4" thick vertical and 3/16" thick horizontal ribs), 4-heavy duty polycarbonate pockets, plus hook and loop for easy storage.
Also Available: MUTCD W20-7 Flagger Ahead Rigid Sign X4569

Flagger Symbol Roll-Up Sign

MUTCD W20-7

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$126.30
Qty
Each
  • 1–2
    $126.30
  • 3–4
    $123.80
  • 5+
    $121.30

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 800‑274‑5271 or email us.

Recommended Accessories

Frequently Purchased Together

Product Information

Details

Roll-Up Signs

This Flagger Symbol Sign is designed to be used as a warning to drivers that a flagman is performing traffic control ahead. This orange Flagger Symbol sign is available in reflective and non-reflective versions, and as roll-up vinyl or aluminum materials. This Flagger Ahead Sign is both MUTCD W20-7 compliant and NCHRP 350 approved.

  • Roll-up sign material grades

Roll-up signs material grades

  • Fluorescent Non-Reflective Solid Vinyl signs are recommended for day time use only, this material is not MUTCD compliant when used at night.
  • Fluorescent Super Bright Reflective Vinyl signs are MUTCD compliant when used day or night.
  • Roll-up sign bracket compatibility

Roll-Up Sign Bracket Compatibility

  • Folded Roll-up sign

Roll-Up Sign Features

  • Unit Weight, without flags: 4 lb
  • Unit Weight, with flags: 5 lb
  • Storage Size: 4" x 4" x 50"
  • roll-up sign folding flags

Roll-Up Sign with Flag Assembly

Our folding flag system allows permanent attachment of two 18" fluorescent orange vinyl flags. Flags roll up with the sign for easy storage and fast deployment. Sliding clips quickly lock flags in their open position.

  • sign-blueprint-tn

Roll-Up Sign Plastic Corner Pockets

At 3/4" deep, the Delta Rib Pocket is designed to be easier to deploy than conventional pockets. Made of tough polycarbonate, it features increased strength and the smallest storage diameter in the industry.

Featuring a full depth design, rectangular pockets are typically used at the top and bottom of the sign. Made of tough polycarbonate, they will fit all pocket style sign holders.

  • sign-blueprint-tn

Overlay Option

Several of the roll-up signs on this website will have velcro added to specific words that allows for multiple messages to be displayed using a single roll-up sign. Overlays are made from the same material as the sign and come with velcro strips on the back.

  • Double-Spring Stand

Rigid Aluminum Signs

sign-blueprint-tn

Rigid signs material grades

  • .080" Fluorescent Diamond Grade Work Zone Reflective Aluminum signs are MUTCD compliant when used day or night.
  • sign-blueprint-tn

Rigid Sign Bracket / Stand Compatibility

  • sign-blueprint-tn

Rigid Sign Features

  • Sign weight: 11 lb
  • Mounting holes: 2 holes at 3/8" diameter, positioned top and bottom
  • Rigid Aluminum Sign

MUTCD Compliance

2009 Edition Part 6 Figure 6F-2. Methods of Mounting Signs Other Than on Posts

The fourth example shows an orange diamond-shaped sign with a black border and letters with the words "UTILITY WORK AHEAD" in three lines mounted on a vertical pole that is mounted on four horizontal supports. The distance from the bottom of the sign to the bottom of the supports is labeled as "1 ft MIN. above the traveled way." At the top of the sign, three orange flags are shown mounted equidistant apart from each other on short staffs that extend out from the top of the vertical pole at 45-degree angles.

  • Methods of Mounting Signs Other Than on Posts

Compliance

Section 6F.31 Flagger Signs

Guidance

  • The Flagger (W20-7) symbol sign should be used in advance of any point where a flagger is stationed to control road users.

Option

  • A distance legend may be displayed on a supplemental plaque below the Flagger sign. The sign may be used with appropriate legends or in conjunction with other warning signs, such as the BE PREPARED TO STOP (W3-4) sign.

Source: 2009 MUTCD

When to Use 36″ and 48″ Temporary Warning Signs

According to the MUTCD:

Type of Roadway Sign Size
Conventional Road 36 × 36″
Freeway or Expressway 48 × 48″

Transportation engineers may find this answer acceptable since they have a deeper understanding of the MUTCD than most, but not everyone has this knowledge. Luckily, definitions of these terms are provided to help make some sense of what they are trying to convey. Here’s how the MUTCD defines each of those types of roadways:

  • "Conventional Road" is a "street or highway other than a low-volume road, expressway, or freeway."
  • "Low-Volume Road" is a facility lying outside of developed areas of cities, towns, and communities, which serves fewer than 400 vehicles per day on average. A low-volume road shall not be a freeway, an expressway, an interchange ramp, a freeway service road, a road on a designated State highway system, or a residential street in a neighborhood.
  • "Expressway" is a divided highway with partial control of access.
  • "Freeway" is a divided highway with full control of access.

Still confused? It's not just you. Generally speaking, if the road is a divided highway with a concrete barrier or median, a 48 × 48″ sign will be required. A 36 × 36″ sign can be used on all other types of roadways.

Reviews

800‑274‑5271
Cart

Your cart is empty.

Chat