SNAP’n SAFE Square Post Breakaway Coupler - Y3540, Sign Posts and Sign Stands

For 2″ Anchor Post to 1¾″ Sign Post
Material Sku Quantity/Price
1+
Cast Gray Iron Y3540-2175SQC $58.95
For 2¼″ Anchor Post to 2″ Sign Post
Material Sku Quantity/Price
1+
Cast Gray Iron Y3540-2252SQC $60.95
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
  • Details

SNAP'n SAFE™ Square Post Breakaway Coupler

This SNAP'n SAFE™ Breakaway Device is made of cast gray iron, and withstands winds of 120 MPH. Made from 80% recycled materials.

Square post ground mount snap'n safe breakaway system unit only Square post ground mount snap'n safe breakaway system on application

Installation

Installation instructions are included with every SNAP'n SAFE square post breakaway device and are provided here for reference purposes.

Tools required:

  1. ½″ socket and ratchet wrench

Installation instructions:

  1. Remove any burrs or imperfections from the inside of the sign post and the anchor post.
  2. Check hole location of the sign post and anchor post. The top holes on the anchor post must be ½″ on center (+/- ⅛″) from the top of the anchor post. The bottom holes of the sign post must be ½″ on center (+/- ⅛″) from the end of the sign post.
  3. Determine the location for the in-ground anchor post.
  4. Drive anchor post into the ground so only three (3) holes are visible. The anchor post must be straight and level at the completion of the installation.
  5. Insert the larger end of the SNAP'n SAFE coupler into the ground anchor post.
  6. Attach the SNAP'n SAFE coupler to the anchor post with the (2) larger RED corner bolts. Use the 1st and 3rd hole in the anchor post for proper alignment. Fasten (1) washer and (1) nut on each RED bolt. Secure hardware evenly by tightening each nut in an alternating pattern.
    Note: RED bolts must be installed on the same side of the post. MAX TORQUE = 21 FT LBS.
  7. Slide the sign post over the top half of the SNAP'n SAFE coupler and attach with the (2) smaller SILVER corner bolts. Use the 2nd and 3rd hole in the sign post for proper alignment. Fasten (1) washer and (1) nut on each SILVER bolt. Secure hardware evenly by tightening each nut in an alternating pattern.
    Note: SILVER bolts must be installed on the same side of the post. MAX TORQUE = 21 FT LBS.

RED and SILVER CORNER BOLTS MUST BE INSTALLED ON SAME SIDE OF THE POSTS, AS SHOWN IN DIAGRAM.

SNAP'n SAFE Square Post Breakaway Coupler diagram

Verified Secure | Customer Approved

Call Us 800-274-6271