Stainless Steel Strapping - Y3534, Sign Mounting Hardware

Stainless Steel Strapping

Stainless Steel Strapping
Item #
Y3534

Note:

Stainless Steel 304

Size:

Material:

Laminate:

Mounting:

Packaging:

Qty
Each
1+
89.95
Price: 89.95
0 In Stock
Special freight arrangements are necessary. Learn More.

Need a quote for a large order? Call 800-274-6271 or email us.

Stainless Steel Strapping is ideal for installing signs on large diameter posts and poles when standard sign mounting brackets won't work. The most common uses for stainless steel strapping are for securing wing type brackets for street name signs, as well as mounting regulatory and warning traffic signs on poles. These rolls of 3/4" x .030” x 100 ft. long stainless steel strapping come in a plastic tote that keeps the strapping organized and allows it to be portable.

Product Information

Details

Stainless Steel Strapping

Stainless steel strapping is ideal for installing signs on large diameter posts and poles when standard sign mounting brackets won't work.

Flared leg bracket with 3/4″ S.S. strapping
Flared leg bracket with ¾" S.S. strapping
Straight leg bracket with 3/4″ S.S. strapping
Straight leg bracket with ¾" S.S. strapping
Side view of a mounted sign using S.S. strapping
Side view of a mounted sign using S.S. strapping
Front view of a mounted sign using S.S. strapping
Front view of a mounted sign using S.S. strapping

Tools required for installation:

Installation steps:

  1. Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
  2. Insert one end of the strapping into your straight or flared leg sign mounting bracket.
  3. Insert the same end into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
  4. Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
  5. Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
  6. Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
  7. Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping.
  8. Repeat these steps to install the second band of strapping.
  9. At last, proceed to install the sign onto the brackets, using the hardware provided (1 hex head bolt and 1 washer each).
Strapping being inserted into the buckle
Strapping being inserted into the buckle
Strapping being inserted into wing seal
Strapping being inserted into wing seal
The other end of the strapping being inserted and bent to hold it in place
The other end of the strapping being inserted and bent to hold it in place
Strapping tool Y3532 tightening the strapping around the pole
Strapping tool Y3532 tightening the strapping around the pole
Strapping tool Y3533 tightening the strapping around the pole
Same process with a different tool Y3533 tightening the strapping around the pole
Using either the Spinner or Ratchet tool cut the excess strapping
Using either the Spinner or Ratchet tool cut the excess strapping
Extra strapping left over to be sealed under buckle or wing seal
Extra strapping left over to be sealed under buckle or wing seal
Bend the strapping over the buckle or wing seal to partially secure the strapping
Bend the strapping over the buckle or wing seal to partially secure the strapping
Wing seal or buckle being closed to secure the strapping
Wing seal or buckle being closed to secure the strapping
mounted sign bracket
Photo of mounted sign bracket
Sign installation process using stainless strapping
Sign installation process
mounted sign using strapping
Photo of a mounted sign

Reviews

800-274-6271
Cart

Your cart is empty.