Concrete & Asphalt Anchor Kit For Mounting Sign Base
Item #
Y4949

Note:

Concrete and Asphalt Mounting Anchor Kit with 4" Lag Screws. For use with Fixed Base Y4946 and 78FLEXYPOST

Concrete & Asphalt Anchor Kit For Mounting Sign Base

For use with Fixed Base Y4946 and 78FLEXYPOST

Anchor Type: Concrete Mounting Anchors

Also Available:

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$18.00

Your item has been added to cart.

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 800‑274‑5271 or email us.

Product Information

Details

Concrete and Asphalt Anchors


Concrete and Asphalt Anchors Kit Include all of the following:

  • 4 - 1/2" x 3" long concrete orange anchors
  • 4 - 1/2" x 4" long -partial thread- lag screws
  • 4 - Washers

Materials Needed for Installation:

  • Drill with 5/8" (16mm) Bit
  • Small Hammer
  • 1/4"Allen Wrench
  • One of the following: 3/4" (19mm) socket, 3/4" (19mm) wrench or adjustable wrench.

Concrete Anchors Kit by SafetySign.com


Installation Steps

  1. Place Fixed Base on surface, align to desired position. Using the base as a template, mark the four (4) holes to establish pattern for drill.
  2. Drill four (4) holes 3" (75mm) deep using a 5/8" (16mm) drill bit. Clean holes.
  3. Using a small hammer gently tap the anchors into the holes.
  4. Place base over the anchors. Put washer onto lag screw. Start lag screw through base hole into anchor. Use 3/4" wrench to tighten lag screw snug into base.
  5. Place the sign or post into base, check for proper alignment and hand tighten all four socket cap screws. Use 1/4" Allen wrench to snug screws.
  • Drill four holes 3
  • Using a small hammer gently tap the anchors into the holes.
  • Use 3/4

Reviews

800‑274‑5271
Cart

Your cart is empty.