Tamperproof Sign Mounting Hardware Kit
For use with U-Channel, Square and Fiberglass Posts
- Item #
- Y4900TS
- Compliance
-
- OSHA 1910.1200(c)
- Shipping Declarations
Note:
1½″ and 2″ long bolts for 1.12 lbs./ft. U-Channel posts. 2½″ bolts for 1¾″ square posts and 2 lbs./ft. U-channel posts. 3″ bolts for 2″ square posts.
Tamperproof One Way Bolt Sets are an ideal solution for helping to prevent theft of traffic, parking and property signs. Each set contains two 5/16” diameter one-way bolts, two breakaway nuts, two zinc coated washers, and two nylon washers for the sign face. These bolts can be used to mount signs with 3/8” mounting holes on U-Channel posts, composite posts, and square posts. 2" bolts are required for 1.12 lbs./ft. U-Channel posts and our composite fiberglass posts. 2-1/2" bolts are required for 1-3/4” square posts and 2 lbs./ft. U-channel posts with or without the addition of our sign saver plates. 3” bolts are required to mount signs on 2” square posts. A 5/8" socket and ratchet wrench will be needed to tighten the breakaway nuts down until they shear.
Frequently Purchased Together
Product Information
Details
5/16″ Tamperproof Bolt Set
Tamperproof one-way bolts are an affordable solution for securing your signs and helping to prevent theft of your traffic, parking, and property signs. The unique design of the bolt head and breakaway nuts allows both the bolts and nuts to be installed while making them almost impossible to remove without cutting tools.
What size bolts should I use with my U-Channel post?
| Post Size | Recommended Bolt Size to Mount 1 Sign with Sign Saver Plates |
Recommended Bolt Size to Mount 2 Signs Back-to-Back with Sign Saver Plates |
|---|---|---|
| 4 ft. U-Channel Post (2 lbs./ft.) | 5/16″ × 2½″ | 5/16″ × 2½″ |
| 6 ft. U-Channel Post (1.12 lbs./ft.) | 5/16″ × 2″ | 5/16″ × 2″ |
| 6 ft. U-Channel Post (2 lbs./ft.) | 5/16″ × 2½″ | 5/16″ × 2½″ |
| 8 ft. U-Channel Post (2 lbs./ft.) | 5/16″ × 2½″ | 5/16″ × 2½″ |
| 10 ft. U-Channel Post (2 lbs./ft.) | 5/16″ × 2½″ | 5/16″ × 2½″ |
| 12 ft. U-Channel Post (2 lbs./ft.) | 5/16″ × 2½″ | 5/16″ × 2½″ |
What size bolts should I use with my square post?
| Post Size | Recommended Bolt Size to Mount 1 Sign | Recommended Bolt Size to Mount 2 Signs Back-to-Back |
|---|---|---|
| 6 ft. × 1¾″ Square Post | 5/16″ × 2½″ | 5/16″ × 2½″ |
| 8 ft. × 1¾″ Square Post | 5/16″ × 2½″ | 5/16″ × 2½″ |
| 8 ft. × 2″ Square Post | 5/16″ × 3″ | 5/16″ × 3″ |
| 10 ft. × 1¾″ Square Post | 5/16″ × 2½″ | 5/16″ × 2½″ |
| 10 ft. × 2″ Square Post | 5/16″ × 3″ | 5/16″ × 3″ |
What size bolts should I use with my fiberglass composite post?
| Post Size | Recommended Bolt Size to Mount 1 Sign | Recommended Bolt Size to Mount 2 Signs Back-to-Back |
|---|---|---|
| 7 ft. Fiberglass Post | 5/16″ × 2″ | 5/16″ × 2″ |
| 8 ft. Fiberglass Post | 5/16″ × 2″ | 5/16″ × 2″ |
Installing Tamperproof Bolts
- Tools required
- ⅝″ socket and ratchet wrench
Installation instructions:
- Place the sign on the square post where it meets your height requirement and line up the mounting holes with the holes on the post.
- Using our Y4901TS or Y3551 bolt sets, insert a washer over the 5/16″ bolts and then insert the bolts into the mounting holes of the sign and through the post.
- Insert a washer on the other end of the bolt followed by the breakaway nut with the cone end facing the post.
- Tighten the nut down until it shears from the cone.
- Optional
- Add a pair of our ribbed sign saver plates that prevents the possibility of sign dimpling during bolt tightening.
