We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Guard Dogs on Premises Sign
- Item #:
- F7922
- Sign Reads:
- No Trespassing Guard Dogs On Premises Yes They Bite
- Sign Design:
- Guard Dog Symbols

This Guard Dogs on Premises Sign has effective messages to address security policy and protection concerns. A Guard Dogs on Premises Sign is a helpful aid for the protection of the health and safety of personnel, and is not an alternative for required protective actions for eliminating or reducing hazards.
No Trespassing Guard Dogs On Premises Yes They Bite
7 × 10″
|
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
.055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | F7922-BB | $7.20 | $7.00 | $6.80 | $6.60 | $6.20 | $5.25 | ||
.040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | F7922-FB | $11.70 | $11.30 | $10.85 | $10.25 | $8.55 | $7.90 | ||
.040″ Engineering Grade Reflective Aluminum | None | Four 7/32″ holes (one in each corner) | F7922-R2B | $13.15 | $12.85 | $12.30 | $11.25 | $10.00 | $8.60 |
10 × 14″
|
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
.055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | F7922-BC | $10.35 | $9.85 | $9.35 | $8.75 | $7.45 | $6.25 | ||
.040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | F7922-FC | $18.25 | $17.25 | $15.10 | $14.50 | $13.80 | $11.50 | ||
.040″ Engineering Grade Reflective Aluminum | None | Four 7/32″ holes (one in each corner) | F7922-R2C | $19.95 | $19.20 | $16.75 | $16.25 | $15.75 | $12.25 |
12 × 18″
|
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
.063″ White Rust-Free Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | F7922-A8C | $19.75 | $17.75 | $16.75 | $15.75 | $14.75 | $13.75 | ||
.080″ Engineering Grade Reflective Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | F7922-A8D | $22.95 | $21.45 | $20.45 | $19.95 | $18.95 | $17.25 |
18 × 24″
|
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
.080″ White Rust-Free Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | F7922-B9G | $32.30 | $31.65 | $31.10 | $29.25 | $28.95 | $28.60 | ||
.080″ Engineering Grade Reflective Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | F7922-B9H | $33.15 | $32.60 | $32.05 | $31.60 | $31.10 | $30.85 |
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
Max Recommended
Viewing Distance*
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
* Under favorable viewing conditions.
Recommended Accessories
- All
- Brackets
- Hardware
- Post Bases
- Posts
- Stands
- Tape
- Tools
Size | Width | Height | Average Text Size |
Max Viewing Distance |
Available Materials | Mounting Holes | Corner Radius | Diagram |
---|---|---|---|---|---|---|---|---|
7 × 10″ | 7″ | 10″ | ⅝″ | Up to 15′ 7″ |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram |
10 × 14″ | 10″ | 14″ | 29/32″ | Up to 22′ 8″ |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram |
12 × 18″ | 12″ | 18″ | 1″ | Up to 25′ |
|
Two ⅜″ Holes | 1½″ | Diagram |
18 × 24″ | 18″ | 24″ | 1⅝″ | Up to 40′ 7″ |
|
Two ⅜″ Holes | 1½″ | Diagram |
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z535.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
Overlaminate |
---|---|---|---|---|---|
Plastic | |||||
Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures. | 0.055″ | 3 to 5 Years | -40° to 180° F |
|
N/A |
Aluminum | |||||
Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. | 0.04″ | 5 to 7 Years | -40° to 212° F |
|
|
0.063″ | 5 to 7 Years | -40° to 212° F |
|
|
|
0.08″ | 5 to 7 Years | -40° to 212° F |
|
|
|
Engineering Grade Reflective Aluminum
A durable enclosed lens retro-reflective material permanently adhered to aluminum. It is an economical choice for non-critical traffic signs, parking lot signs, and safety signs. The pattern free face allows for clean graphic imaging. It meets the requirements of ASTM D4956 Type I, and will remain effective for up to 7 years. Resistant to fading and mild chemicals.
Reflectivity:
|
0.04″ | Up to 7 Years | -10°F - 130°F |
|
|
0.08″ | Up to 7 Years | -10°F - 130°F |
|
|




None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
---|---|---|---|---|
ATSM D956 Type | – | Type I | Type IV | Type IX |
Brightness | – | Standard Material | 3x More | 10x More |
Night-Time Visibility | – | 500' | 1,000' | 1,500' |
Reflectivity |
|
|
|
|
Using the latest digital printing processes, your Guard Dogs on Premises Sign is printed without set-up charges or minimums. These advanced processes also reduce set-up times, helping to get your Guard Dogs on Premises Sign shipped out faster than ever. SafetySign.com prints your text and graphics straight onto the substrate without the need for lamination. Your UV ink printed text and graphics will not peel, unlike signs from companies that laminate graphics over the sign material.

Printing Methods

Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.