Stainless Steel Flared Leg Brackets
Item #
Y3530-SSFL

Stainless Steel Flared Leg Brackets

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$8.20

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 800‑274‑5271 or email us.

Product Information

Details

Stainless Steel Flared Leg Brackets

The Stainless Steel Flared Leg Bracket is used to mount signs with ⅜″ mounting holes to bands of stainless steel strapping. Recommended for use on poles equal or larger than 3″ in diameter.

These stainless steel flared leg brackets are sold as a package of 2 brackets with 2 hex head bolts and 2 washers.

  • Flared leg bracket for use with 3/4″ S.S. strapping
  • Mounted flared leg bracket
  • Bracket mounted on small post sizes, 2 inch post too small
    1.5" and 2" poles are too small
    for this bracket

Installation

Installation steps:

  • Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
  • Insert one end of the strapping into your straight or flared leg sign mounting bracket.
  • Insert the same end into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
  • Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
  • Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
  • Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
  • Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping.
  • Repeat these steps to install the second band of strapping.
  • At last, proceed to install the sign onto the brackets, using the hardware provided (1 hex head bolt and 1 washer each).
  • Strapping being inserted into the buckle
    Strapping being inserted into the buckle
  • Strapping being inserted into wing seal
    Strapping being inserted into wing seal
  • The other end of the strapping being inserted and bent to hold it in place
    The other end of the strapping being inserted
    and bent to hold it in place
  • Strapping tool Y3532 tightening the strapping around the pole
    Strapping tool Y3532 tightening the strapping
    around the pole
  • Strapping tool Y3533 tightening the strapping around the pole
    Same process with a different tool Y3533
    tightening the strapping around the pole
  • Using either the Spinner or Ratchet tool cut the excess strapping
    Using either the Spinner or Ratchet tool cut
    the excess strapping
  • Extra strapping left over to be sealed under buckle or wing seal
    Extra strapping left over to be sealed under
    buckle or wing seal
  • Bend the strapping over the buckle or wing seal to partially secure the strapping
    Bend the strapping over the buckle or wing
    seal to partially secure the strapping
  • Wing seal or buckle being closed to secure the strapping
    Wing seal or buckle being closed to secure
    the strapping
  • mounted sign bracket
    Mounted sign bracket
  • Sign installation process using stainless strapping
    Sign installation process
  • mounted sign using strapping
    Mounted sign

Reviews

800‑274‑5271
Cart

Your cart is empty.