Adjustable Cross Separator For Flat Blade Street Name Signs
Adjusts to any angle
- Item #
- OSHA 1910.1200(c)
- Shipping Declarations
The Adjustable Cross Piece For Flat Blade Street Name Signs is the ideal bracket for mounting a second street name sign at any angle to coincide with the intersecting street. It is also used to mount a street name sign so that it faces the same direction as the sign below it, such as a Dead End or No Outlet sign.
The opening on the bracket is 7/8" deep at the tallest part of the slot and 3/16" wide which easily accommodates .080" thick flat blade signs. 5-1/2" and 12" wide brackets are available and both are fully adjustable to any angle. The 5-1/2" bracket is ideal for 6" tall street signs with lengths up to 24", and the 12" bracket is best suited for all 9" tall street signs as well as 6" tall signs with lengths of 30" or more.
Each flat blade cross piece bracket includes set screws for securing the top and bottom sign. No holes are required on the street name sign for installation. A 5/32" hex key is necessary to tighten the set screws.
Frequently Purchased Together
Street Name Sign Bracket - Adjustable Cross Piece Bracket
The adjustable cross piece street name sign bracket is designed to be adjustable to any angle which makes it the most versatile cross bracket you can purchase. 5½″ and 12″ wide brackets are available to accommodate both small and large street name signs, as well as brackets for .080″ flat blade signs and extruded blade signs.
Tools required for installation:
- 5/32″ hex key
- (2) ½″ socket and ratchet wrenches or (1) ½″ socket and ratchet wrench and (1) ½″ socket driver.
- Remove the bolts and nuts from both halves of the bracket.
- Use one bolt and nut to secure the bracket halves together at the angle required. Store the extra nut and bolt as it is not needed.