We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
MUTCD All Way Sign
- Item #:
- Y1283
- Sign Reads:
- All Way
- Compliance:
-
- MUTCD
Other configurations of this product

18 × 6″
|
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
.080″ Engineering Grade Reflective Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | Y1283-B5D | $19.75 | $19.45 | $19.25 | $18.95 | $18.45 | $17.95 |
Phone: 800-274-6271
Fax: 800-279-6897
Viewing Distance*
* Under favorable viewing conditions.
- All
- Brackets
- Hardware
- Posts
- Reflective Panels
- Stands
Size | Width | Height | Average Text Size |
Available Materials | Mounting Holes | Corner Radius | Diagram |
---|---|---|---|---|---|---|---|
18 × 6″ | 18″ | 6″ | 3″ |
|
Two ⅜″ Holes | 1½″ | Diagram |
Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
Overlaminate |
---|---|---|---|---|---|
Engineering Grade Reflective Aluminum
A durable enclosed lens retro-reflective material permanently adhered to aluminum. It is an economical choice for non-critical traffic signs, parking lot signs, and safety signs. The pattern free face allows for clean graphic imaging. It meets the requirements of ASTM D4956 Type I, and will remain effective for up to 7 years. Resistant to fading and mild chemicals.
Reflectivity:
|
0.08″ | Up to 7 Years | -10°F - 130°F |
|
|




None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
---|---|---|---|---|
ATSM D956 Type | – | Type I | Type IV | Type IX |
Brightness | – | Standard Material | 3x More | 10x More |
Night-Time Visibility | – | 500' | 1,000' | 1,500' |
Reflectivity |
|
|
|
|


SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.

The text is printed in font.
The MUTCD Stop Sign from SafetySign.com uses this font because it is required by the design guidelines set by the Manual on Uniform Traffic Control Devices (MUTCD) and the Standard Highway Signs manual. This font is proven to be legible under various conditions and viewing distances.