Washington DC Spa Rules Sign - F8245, Pool Signs By State

Spa Rules: All Bathers Must Shower Prior To Entering The Spa, The Use Of The Spa While Under The Influence Of Alcohol, Drugs, Medicines, Or Anything Elsem That May Impair The Senses Or Cause Drowsiness Is Prohibited, The Use Of Electrical Appliances Or Devices Within Five Feet (5 Ft.) Of The Spa Is Prohibited, Unsupervised Use By Children Under The Age Of Fifteen (15) Is Prohibited, The Use Of Topical Agents Including, Oils, Body Lotions, And Minerals Prior To Entering, Or While In The Water Is Prohibited, The Consumption Of Food Or Beverages In Areas Other Than Specifically Designated Eating Areas That Are Separated From The Spa Is Prohibited, Persons Who Show Apparent Signs Of Infection Or Other Evidence Of High Contamination Risk, Such As Open Cuts, Wounds, Rashes, Or Blisters, Except When Certified By A Physician Not To Have A Disease In A Communicable Stage, Are Prohibited From Using The Spa, Elderly Persons And Those Suffering From Heart Disease, Diabetes, Or High Blood Pressure Should Not Use The Spa, Bathers Should Observe A Reasonable Period Of Exposure In The Spa Of Ten (10) Minutes, Shower Upon Exiting The Spa, And Then Cool Down Before Returning To The Spa For Another Brief Exposure Period, Long Exposure May Result In Nausea, Dizziness Or Fainting. A Short Exposure Period Is Recommended For Pregnant Women, Pregnant Women Should Not Use The Spa Without Consulting Their Physician, Always Exit And Enter Slowly And Cautiously, The Maximum Temperature Allowed By The Department Of Health For Any Spa Is 104° Fahrenheit (40° Centigrade). The Actual Temperature Of This Spa At _____O'Clock Today Is _____°F (_____°C), The Certified Swimming Pool And Spa Operator At This Facility Is: __________ District Permit Number: __________
36 × 48″
Material Overlaminate Mounting Holes Sku Quantity/Price
1–2 3–4 5–9 10–19 20–39 40+
.080″ Rust-Free Aluminum None Four 5/16″ holes (one in each corner) F8245-P2C $132.95 $126.25 $121.95 $119.50 $117.50 $115.10
.080″ Engineering Grade Reflective Aluminum None Four 5/16″ holes (one in each corner) F8245-P2D $205.10 $156.25 $139.95 $136.50 $127.25 $118.50
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Service Temp Range:
Max Recommended
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
  • Size
  • Material
  • Printing
Size Width Height Available Materials Mounting Holes Corner Radius Diagram
36 × 48″ 36″ 48″
  • .080″ Rust-Free Aluminum
  • .080″ Engineering Grade Reflective Aluminum
Four 5/16″ Holes 1½″ Diagram
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z353.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
Material Thickness Outdoor Durability Service Temp. Range Available
Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. 0.08″ 5 to 7 Years -40° to 212° F
  • 36 × 48″
  • None
Engineering Grade Reflective Aluminum A durable enclosed lens retro-reflective material permanently adhered to aluminum. It is an economical choice for non-critical traffic signs, parking lot signs, and safety signs. The pattern free face allows for clean graphic imaging. It meets the requirements of ASTM D4956 Type I, and will remain effective for up to 7 years. Resistant to fading and mild chemicals. Reflectivity:      
0.08″ Up to 7 Years -10°F - 130°F
  • 36 × 48″
  • None
Engineering Grade
High Intensity Prismatic
Diamond Grade
  NoneEngineering GradeHigh Intensity PrismaticDiamond Grade
ATSM D956 Type Type I Type IV Type IX
Brightness Standard Material 3x More 10x More
Night-Time Visibility 500' 1,000' 1,500'
SafetySign Printing
Printing Methods

We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.

SafetySign Printing
Cross-Hatch Ink Adhesion Test

SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.

We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.

SafetySign Printing

The text is printed in Franklin Gothic Medium and Franklin Gothic Demi Condensed fonts.

SafetySign.com has opted to use these fonts on the Washington DC Spa Rules Sign because this sign contains a large amount of text and these fonts provide a bold message while still allowing for optimal readability.

Verified Secure | Customer Approved

Call Us 800-274-6271