Flying Objects Face Shield Required Label - I2046L, Eye Safety Labels by SafetySign.com

Preview:
Flying Objects Face Shield Required Label
Choose a Language:
Apply
Need another language?
Write your own translation. Custom pricing will apply.
Design Your Own Label
Warning Flying Objects. Face Shield Required When Operating This Equipment.
5 × 3½″
Material Packaging Sku Quantity/Price
1–2 3–4 5–9 10–19 20–39 40+
3.5 Mil Adhesive-Backed Vinyl Sold in Packages of 5 I2046-AA $15.95 $14.50 $13.95 $12.00 $10.95 $9.75
3.5 Mil Adhesive-Backed Vinyl Sold in Packages of 50 I2046-AAB $69.50 $63.45 $57.00 $54.10 $45.25 $39.25
7 × 5″
Material Packaging Sku Quantity/Price
1–2 3–4 5–9 10–19 20–39 40+
3.5 Mil Adhesive-Backed Vinyl Sold Individually I2046-B2L $4.75 $4.15 $3.65 $3.45 $3.25 $3.00
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
Oops!
This item can only be purchased with quantity . Please enter a new quantity and try again.
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:            
Service Temp Range:
Max Recommended
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.

A Flying Objects Face Shield Required Label has official ANSI headers for safety protocol and compliance. A Flying Objects Face Shield Required Label is a useful tool to help protect the health and safety of staff, and is not a substitute for necessary protective measures for lessening or eliminating hazards.

  • Compliance
  • Size
  • Material
  • Printing

Eye Protection Labels

Choosing the right safety labels for hazardous areas can make all the difference when it comes to keeping your workers safe. Which of these labels is the best choice for helping to prevent eye injuries?

Eye Protection labels

Although each of these will help keep you in compliance with OSHA regulations for eye safety, (A) is the best choice. Here's why:

According to the latest revision of the ANSI Z535.2 standard, the "WARNING" signal word from (A) instantly identifies a hazardous situation that if not avoided, could result in severe injury or death. This means that if eye protection is not worn in the area, it is possible that an eye injury could occur, and such an injury is considered serious by ANSI, thus making the "WARNING" signal word the only choice.

Additionally, the warning label (A) also clearly identifies what exactly the hazard in the area is, informing workers why they need to wear eye protection beyond a certain point. It also includes a bright blue graphic depicting a person wearing eye protection, serving as a quick, at-a-glance reminder that eye protection is required in the area. Therefore, (A) represents the best choice for reminding workers that eye protection is required.

SafetySign.com does not recommend or specify the use of a specific safety sign because it does not have knowledge of the hazard(s) our customers are identifying. It is the customer’s sole responsibility to identify the hazard(s) that may be present and select one or more signs (stock or custom) that accurately identify their specific hazard(s) and complies with any applicable federal, state or local laws or regulations, any worksite specific rules or regulations and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). SafetySign.com disclaims any and all liability (excluding liability for our Product Warranty contained in our Terms and Conditions) for any sign selected by a customer and shall not be responsible for any personal injury or property damage resulting from the use of signs purchased from it or for the independent interpretation made of any applicable federal, state or local laws or regulations, any worksite specific rules or regulations, and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). Customer shall indemnify and hold SafetySign.com and its corporate parent and its officers, directors and affiliates harmless from and against any and all claims, loss or expense (including attorneys’ fees) arising from or related to the purchase and use by customer or any third party of any sign purchased by customer from SafetySign.com.

Size Width Height Average
Text Size
Max Viewing
Distance
Available Materials Corner Radius Diagram
5 × 3½″ 5″ 3½″ ¼″ Up to 6′ 3″
  • 3.5 Mil Adhesive-Backed Vinyl
⅛″ Diagram
7 × 5″ 7″ 5″ N/A Coming Soon
  • 3.5 Mil Adhesive-Backed Vinyl
¼″ Diagram
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z353.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
More Options SafetySign.com understands that the Flying Objects Face Shield Required Label may not be available in the size that you require. Please contact our customer service team today and we’ll be happy to work with you to produce exactly what you need. Contact us now.
Material Thickness Outdoor Durability Service Temp. Range Available
Sizes
Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. 3.5 mils 4 to 5 Years -20° to 176° F
  • 5 × 3½″
  • 7 × 5″
 
None
Engineering Grade
High Intensity Prismatic
Diamond Grade
  NoneEngineering GradeHigh Intensity PrismaticDiamond Grade
ATSM D956 Type Type I Type IV Type IX
Brightness Standard Material 3x More 10x More
Night-Time Visibility 500' 1,000' 1,500'
Reflectivity
     
     
     
     
SafetySign.com understands that the Flying Objects Face Shield Required Label may not be available in a material that meets your requirements. Please contact our customer service team today and we’ll be happy to work with you to find the right material for your needs. Contact us now.
This Flying Objects Face Shield Required Label is printed using the latest digital printing technologies and processes. This greatly reduces set-up time, allowing SafetySign.com to print your Label quickly without set-up charges or minimums. SafetySign.com prints your text and graphics directly onto the substrate without lamination using UV inks. Your Flying Objects Face Shield Required Label text and graphics will not peel, unlike Labels from companies that laminate graphics over the Label material.
SafetySign Printing
Printing Methods

We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.

SafetySign Printing
Cross-Hatch Ink Adhesion Test

SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.

We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.

SafetySign Printing
Fonts

The text is printed in Arial Black and Arial Bold fonts.

SafetySign.com uses these fonts on the Flying Objects Face Shield Required Label to create a bold message that stands out in order to grab the attention of workers using the equipment, while also remaining clearly legible at the maximum safe viewing dista

Verified Secure | Customer Approved

Call Us 800-274-6271