Hazardous Materials Identification System - M3371, NFPA Diamonds by SafetySign.com

Hazardous Materials Identification System, Hazard Index 4 Severe Hazard, 3 Serious Hazard, 2 Moderate Hazard, 1 Slight Hazard, 0 Minimal Hazard *An Asterisk Or Other Designation Corresponds To Additional Information On A Data Sheet Or Separate Chronic Effects Notification, Health _ _, Flammability _, Physical Hazard _, Personal Protection _____ Personal Protection Index, X Consult Your Supervisor Or S.O.P. For "Special" Handling Directions
10 × 7″
Material Overlaminate Mounting Holes Sku Quantity/Price
1–2 3–4 5–9 10–19 20–39 40+
.055″ Polyethylene Plastic N/A Four 7/32″ holes (one in each corner) M3371-BL $6.70 $6.50 $6.30 $6.10 $5.70 $4.40
.040″ Rust-Free Aluminum None Four 7/32″ holes (one in each corner) M3371-FL $10.70 $10.40 $9.85 $9.40 $7.60 $6.70
3.5 Mil Adhesive-Backed Vinyl N/A N/A M3371-AL $5.80 $5.70 $5.20 $4.70 $3.80 $3.20
14 × 10″
Material Overlaminate Mounting Holes Sku Quantity/Price
1–2 3–4 5–9 10–19 20–39 40+
.055″ Polyethylene Plastic N/A Four 7/32″ holes (one in each corner) M3371-BK $9.85 $9.40 $8.90 $7.95 $6.90 $5.75
.040″ Rust-Free Aluminum None Four 7/32″ holes (one in each corner) M3371-FK $17.35 $15.95 $13.50 $12.95 $12.45 $10.45
3.5 Mil Adhesive-Backed Vinyl N/A N/A M3371-AK $9.70 $8.40 $8.20 $7.50 $6.50 $5.60
18 × 12″
Material Overlaminate Mounting Holes Sku Quantity/Price
1–2 3–4 5–9 10–19 20–39 40+
.063″ Rust-Free Aluminum None Four ¼″ holes (one in each corner) M3371-B6C $18.80 $17.80 $17.50 $16.95 $14.95 $13.95
.125″ Polyethylene Plastic N/A Four ¼″ holes (one in each corner) M3371-B6T $17.95 $16.00 $15.50 $14.75 $13.95 $12.95
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
Oops!
This item can only be purchased with quantity . Please enter a new quantity and try again.
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:            
Service Temp Range:
Max Recommended
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.

This Hazardous Materials Identification System uses the NFPA rating system for chemical safety and emergency response. A Hazardous Materials Identification System is a useful device to help protect the health and safety of personnel, but is not an alternative for required protective measures for eliminating or abating hazards.

  • Size
  • Material
  • Printing
Size Width Height Average
Text Size
Available Materials Mounting Holes Corner Radius Diagram
10 × 7″ 10″ 7″ 3/16″
  • 3.5 Mil Adhesive-Backed Vinyl
N/A ¼″ Diagram
  • .040″ Rust-Free Aluminum
  • .055″ Polyethylene Plastic
Four 7/32″ Holes (#10 or 3/16″ screws recommended) ¼″ Diagram
14 × 10″ 14″ 10″ ¼″
  • 3.5 Mil Adhesive-Backed Vinyl
N/A ¼″ Diagram
  • .040″ Rust-Free Aluminum
  • .055″ Polyethylene Plastic
Four 7/32″ Holes (#10 or 3/16″ screws recommended) ¼″ Diagram
18 × 12″ 18″ 12″ N/A
  • .063″ Rust-Free Aluminum
  • .125″ Polyethylene Plastic
Four ¼″ Holes (#12 or 7/32″ screws recommended) ½″ Diagram
NFPA 704, the Standard System for the Identification of the Hazards of Materials for Emergency Response, outlines minimum text size requirements to ensure that NFPA 704 signs remain legible at long distances in order to keep emergency personnel safe. In addition to the viewing distance specifications, the standard also provides dimensions of each hazard rating number as it relates to the hazard rating quadrant surrounding it.
It is the responsibility of the end user to determine the viewing distance, and the correct size NFPA 704 sign necessary to alert emergency personnel at a safe distance. According to the NFPA 704 Standard, a ratio of 25 feet of viewing distance per inch of text should be used to determine the minimum text size required up to 100 feet. From 100 to 200 feet, a ratio of 100 feet per inch of text should be used, and from 200 to 300 feet, a ratio of 50 feet per inch of text should be used. The NFPA 704 Standard does not distinguish between favorable or unfavorable viewing conditions.
More Options SafetySign.com understands that the Hazardous Materials Identification System may not be available in the size that you require. Please contact our customer service team today and we’ll be happy to work with you to produce exactly what you need. Contact us now.
Material Thickness Outdoor Durability Service Temp. Range Available
Sizes
Overlaminate
Labels
Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. 3.5 mils 4 to 5 Years -20° to 176° F
  • 10 × 7″
  • 14 × 10″
N/A
Plastic
Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures. 0.055″ 3 to 5 Years -40° to 180° F
  • 10 × 7″
  • 14 × 10″
N/A
0.125″ 3 to 5 Years -40° to 180° F
  • 18 × 12″
N/A
Aluminum
Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. 0.04″ 5 to 7 Years -40° to 212° F
  • 10 × 7″
  • 14 × 10″
  • None
0.063″ 5 to 7 Years -40° to 212° F
  • 18 × 12″
  • None
 
None
Engineering Grade
High Intensity Prismatic
Diamond Grade
  NoneEngineering GradeHigh Intensity PrismaticDiamond Grade
ATSM D956 Type Type I Type IV Type IX
Brightness Standard Material 3x More 10x More
Night-Time Visibility 500' 1,000' 1,500'
Reflectivity
     
     
     
     
SafetySign.com understands that the Hazardous Materials Identification System may not be available in a material that meets your requirements. Please contact our customer service team today and we’ll be happy to work with you to find the right material for your needs. Contact us now.
This Hazardous Materials Identification System is printed with the latest digital printing practices, which reduce set-up times and allows SafetySign.com to ship out faster than competitors. Set-up charges and order minimums are also eliminated due to our advanced printing methods. At SafetySign.com, we print your text and graphics with UV inks directly to the substrate, without lamination. Your text and graphics won't peel, unlike signs from companies that laminate graphics over the Hazardous Materials Identification System material.
SafetySign Printing
Printing Methods

We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.

SafetySign Printing
Cross-Hatch Ink Adhesion Test

SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.

We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.

SafetySign Printing
Fonts

The text is printed in Arial Condensed Bold, Arial Bold, and Arial Black fonts.

The Hazardous Materials Identification System from SafetySign.com uses these fonts to create a bold message that stands out in order to grab your attention, while also allowing for a large message that remains clearly legible.

Verified Secure | Customer Approved

Call Us 800-274-6271