We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Shoplifters Will Be Prosecuted Sign
This Shoplifters Will Be Prosecuted Sign has effective messages to address security procedures and protection concerns. A Shoplifters Will Be Prosecuted Sign is a helpful resource to aid in the protection of the health and safety of staff, and is not an alternative for required protective measures for eliminating or reducing hazards.
Related Products
Shoplifters Will Be Prosecuted
|
7 × 10″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| 3.5 Mil Adhesive-Backed Vinyl | N/A | N/A | F7103-AB | $5.80 | $5.70 | $5.20 | $4.70 | $3.80 | $3.20 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | F7103-BB | $6.70 | $6.50 | $6.30 | $6.10 | $5.70 | $4.40 | ||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | F7103-FB | $10.70 | $10.40 | $9.85 | $9.40 | $7.60 | $6.70 | ||
| .040″ Engineering Grade Reflective Aluminum | None | Four 7/32″ holes (one in each corner) | F7103-R2B | $22.65 | $16.10 | $12.65 | $11.45 | $9.50 | $8.25 | ||
|
10 × 14″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| 3.5 Mil Adhesive-Backed Vinyl | N/A | N/A | F7103-AC | $9.70 | $8.40 | $8.20 | $7.50 | $6.50 | $5.60 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | F7103-BC | $9.85 | $9.40 | $8.90 | $7.95 | $6.90 | $5.75 | ||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | F7103-FC | $17.35 | $15.95 | $13.50 | $12.95 | $12.45 | $10.45 | ||
| .040″ Engineering Grade Reflective Aluminum | None | Four 7/32″ holes (one in each corner) | F7103-R2C | $24.50 | $18.25 | $14.75 | $13.45 | $12.95 | $10.95 | ||
|
12 × 18″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .063″ Rust-Free Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | F7103-A8C | $18.80 | $17.80 | $17.50 | $16.95 | $14.95 | $13.95 | ||
| .080″ Engineering Grade Reflective Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | F7103-A8D | $19.80 | $18.75 | $18.25 | $17.75 | $15.75 | $14.75 | ||
| .125″ Polyethylene Plastic | N/A | Two ⅜″ holes (one at top, one at bottom) | F7103-A8T | $17.95 | $16.00 | $15.50 | $14.75 | $13.95 | $12.95 | ||
|
18 × 24″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .080″ Rust-Free Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | F7103-B9G | $29.75 | $28.40 | $27.90 | $27.40 | $26.90 | $25.75 | ||
| .080″ Engineering Grade Reflective Aluminum | None | Two ⅜″ holes (one at top, one at bottom) | F7103-B9H | $33.25 | $31.25 | $30.25 | $29.50 | $28.75 | $27.75 | ||
| .125″ Polyethylene Plastic | N/A | Two ⅜″ holes (one at top, one at bottom) | F7103-B9T | $27.50 | $26.50 | $25.50 | $24.50 | $23.25 | $22.75 | ||
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
Max Recommended
Viewing Distance*
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
* Under favorable viewing conditions.
| Size | Width | Height | Average Text Size |
Max Viewing Distance |
Available Materials | Mounting Holes | Corner Radius | Diagram |
|---|---|---|---|---|---|---|---|---|
| 7 × 10″ | 7″ | 10″ | 13/16″ | Up to 19′ 11″ |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram | |||||
| 10 × 14″ | 10″ | 14″ | 1 1/32″ | Up to 25′ 5″ |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram | |||||
| 12 × 18″ | 12″ | 18″ | 1 5/32″ | Up to 28′ 11″ |
|
Two ⅜″ Holes | 1½″ | Diagram |
| 18 × 24″ | 18″ | 24″ | N/A | Coming Soon |
|
Two ⅜″ Holes | 1½″ | Diagram |
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z353.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
| Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
Overlaminate |
|---|---|---|---|---|---|
| Labels | |||||
| Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. | 3.5 mils | 4 to 5 Years | -20° to 176° F |
|
N/A |
| Plastic | |||||
| Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures. | 0.055″ | 3 to 5 Years | -40° to 180° F |
|
N/A |
| 0.125″ | 3 to 5 Years | -40° to 180° F |
|
N/A | |
| Aluminum | |||||
| Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. | 0.04″ | 5 to 7 Years | -40° to 212° F |
|
|
| 0.063″ | 5 to 7 Years | -40° to 212° F |
|
|
|
| 0.08″ | 5 to 7 Years | -40° to 212° F |
|
|
|
|
Engineering Grade Reflective Aluminum
A durable enclosed lens retro-reflective material permanently adhered to aluminum. It is an economical choice for non-critical traffic signs, parking lot signs, and safety signs. The pattern free face allows for clean graphic imaging. It meets the requirements of ASTM D4956 Type I, and will remain effective for up to 7 years. Resistant to fading and mild chemicals.
Reflectivity:
|
0.04″ | Up to 7 Years | -10°F - 130°F |
|
|
| 0.08″ | Up to 7 Years | -10°F - 130°F |
|
|
|
| None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
|---|---|---|---|---|
| ATSM D956 Type | – | Type I | Type IV | Type IX |
| Brightness | – | Standard Material | 3x More | 10x More |
| Night-Time Visibility | – | 500' | 1,000' | 1,500' |
| Reflectivity |
|
|
|
|
Using the latest digital printing processes, your Shoplifters Will Be Prosecuted Sign is printed without set-up charges or minimums. These advanced processes also reduce set-up times, helping to get your Shoplifters Will Be Prosecuted Sign shipped out faster the competitors. SafetySign.com prints your text and graphics straight onto the substrate without the need for lamination. Your UV ink printed text and graphics will not peel, unlike signs from companies that laminate graphics over the sign material.
Printing Methods
Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
Fonts
The text is printed in HGDPIXymbols font.
The Shoplifters Will Be Prosecuted Sign from SafetySign.com uses these fonts because they allow the message to fit on the sign, still remain legible, and make an immediate impact when reading the sign. It also gives the sign an official look and feel, which makes the message seem more authoritative.
Recommended Accessories
- All
- Brackets
- Hardware
- Posts
- Stands
Prev
U-Channel Post Kit - Green Enamel and Galvanized
Includes hardware to mount 1 sign
U-Channel Posts - Green Enamel and Galvanized
2-3/8'' Galvanized Round Post
Fiberglass Sign Post with Hardware
Sign Bolting Set
Tamperproof 1-Way R™ Bolt Set
Screwdriver for SignGuardian™ and 1-Way R™ Bolts
3" Ribbed Aluminum Sign Saver Plates
U-Channel Post Tamperproof Sign Mounting Hardware
Adjustable Large Round Post Bracket
Tamper-Resistant 2" Chain Link Fence Sign Mounting Kit
Tamper-Resistant SignGuardian™ Chain Link Fence Bracket
2-3/8'' Round Post Sign Bracket For 1 Sign
2-3/8'' Round Post Sign Bracket For 2 Signs Back to Back
1.12 lb./ft. Green Enamel U-Channel Post
Available in 4 ft. and 6 ft. posts
1.12 lb./ft. Galvanized U-Channel Post
Available as a 6 ft. post
3/16 x 1-1/2" Bolt Set
Set includes 2 bolts, 2 nuts, 4 washers
#10 x 1-1/2" Wood Screws
Package of 2 screws
30" Silver Sign Stakes
Works best with 12" tall 911 Address Signs
#8-18 x 3/8" Self-Tapping Screws
Package of 2 screws
One Way Bolts
5/16" Zinc Plated Washers
5/16" Break-Away Nuts
5/16" Nylon Washers
30 lb. Octagon Base w/ 6' U-Channel or 5' PVC Post
Includes hardware to mount 1 sign
60 lb. Octagon Base w/ 6' U-Channel or 5' PVC Post
Includes hardware to mount 1 sign
10lb. Aluminum Sign Base with 4' Post
40lb. Rubber Phoenix Sign Base with 6' Post
48" Tall 37lb. Cast Iron Sign Stand
Green Enamel Breakaway Safety Splice Kit
Galvanized Breakaway Safety Splice Kit
4lb. Steel U-Channel Post Protector For Post Installation
32lb. Steel U-Channel Post Driver
