We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Access Door Pipe Marker
- Item #:
- A17
- EZ Marker Reads:
- Access Door
- Compliance:
-
- ANSI / ASME
Other configurations of this product
This Access Door Pipe Marker uses informational messages for safety identification and compliance. An Access Door Pipe Marker is a useful tool to help protect the health and safety of personnel, but is not a substitute for required protective measures for eliminating or reducing hazards.
Access Door
|
8 × 1⅛″ (Fits ¾–1¼″ Pipe OD)
|
|||||
|---|---|---|---|---|---|
| Material | Sku | Quantity/Price | |||
|
|||||
| 3.2 Mil Adhesive-Backed Vinyl | A171XSM R/W | $0.45 | $0.42 | $0.39 | |
|
8 × 1⅛″ (Fits 1½–2⅜″ Pipe OD)
|
|||||
|---|---|---|---|---|---|
| Material | Sku | Quantity/Price | |||
|
|||||
| 3.2 Mil Adhesive-Backed Vinyl | A171SM R/W | $0.45 | $0.42 | $0.39 | |
|
14 × 2¼″ (Fits 2½–7⅞″Pipe OD)
|
|||||
|---|---|---|---|---|---|
| Material | Sku | Quantity/Price | |||
|
|||||
| 3.2 Mil Adhesive-Backed Vinyl | A171 R/W | $1.25 | $1.13 | $1.01 | |
|
24 × 4″ (Fits 8–10″ Pipe OD)
|
|||||
|---|---|---|---|---|---|
| Material | Sku | Quantity/Price | |||
|
|||||
| 3.2 Mil Adhesive-Backed Vinyl | A171LG R/W | $2.60 | $2.40 | $2.15 | |
|
32 × 4″ (Fits 10″+ Pipe OD)
|
|||||
|---|---|---|---|---|---|
| Material | Sku | Quantity/Price | |||
|
|||||
| 3.2 Mil Adhesive-Backed Vinyl | A171XLG R/W | $3.80 | $3.60 | $3.25 | |
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
Max Recommended
Viewing Distance*
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
* Under favorable viewing conditions.
Recommended Accessories
- All
- Applicator
EZ Pipe Markers (Stick On Labels)
- Self adhesive markers you peel and stick
- Brimar's specially formulated adhesive is applied with a heavy coating to ensure adhesion to a variety of surfaces.
- Markers should only be applied to clean and dry surfaces.
- Markers comply with the new ANSI / ASME A13.1 2007 standard if used in conjunction with arrows, all 3 options of assembly shown below are in compliance.
- Durability: 4 to 7 years outdoors
- Service Temp: -40 to 180° F
- Minimum Application Temp: 50° F
- Surface Prep: Clean & Dry
- Spec Compliance: ANSI / ASME A13.1 2007
MARKER SIZE, LETTER HEIGHT & MAX. CHARACTERS PER MARKER CHART
The following chart shows the recommended pipe marker letter height and marker size based on the outside pipe diameter of the pipe to be identified. For pipes smaller than 3/4" and for valve identification, the use of a permanent legible tag is recommended.
 STYLE 1XSM For pipes with O.D. of 3/4" to 1-1/4" Legend Size: 1/2" High Marker Size: 1-1/8" x 8" EZ Arrow Size: 1-1/8" x 4" |
 STYLE 1SM For pipes with O.D. of1-1/2" to 2-3/8" Legend Size: 3/4" High Marker Size: 1-1/8" x 8" EZ Arrow Size: 1-1/2" x 4" |
 STYLE 1 For pipes with O.D. of 2-1/2" to 6" Legend Size: 1-1/4" High Marker Size: 2-1/4" x 14" EZ Arrow Size: 2-1/4" x 6" |
||||||||||||||||||||||||
 STYLE 1LG For pipes with O.D. of 8" to 10" Legend Size: 2-1/2" High Marker Size: 4" x 24" EZ Arrow Size: 4" x 7" |
 STYLE 1XLG For pipes with O.D. over 10" Legend Size: 3-1/2" High Marker Size: 4" x 32" EZ Arrow Size: 4" x 7" |
|
BACKGROUND COLOR
Color is the secondary means to identify the contents of a piping system but, many times the most important. The color of the marker should be used to identify the characteristic hazard of the contents of the pipe. The following chart list the classifications shown by ANSI / ASME A13.1 2007 as the suggested color combinations for the pipe markers.
| FLUID SERVICE | COLOR COMBINATIONS |
| Fire Quenching Fluids | Safety Red Background / White Legend
|
| Toxic & Corrosive Fluids | Safety Orange Background / Black Legend
|
| Flammable Fluids | Safety Yellow Background / Black Legend
|
| Combustible Fluids | Safety Brown Background /White Legend
|
| Potable, Cooling, Boiler feed, & other Water | Safety Green Background/ White Legend
|
| Compressed Air | Safety Blue Background / White Legend
|
| Defined by the User | Safety Purple Background / White Legend
|
| Defined by the User | Safety White Background / Black Legend
|
| Defined by the User | Safety Gray Background / White Legend
|
| Defined by the User | Safety Black Background / White Legend
|
LEGENDS & DIRECTIONAL FLOW
The standard regards the legend (wording on marker) to be the primary means of identifying the content of the pipe. The marker should give the name of the contents of the pipe in either the full name or abbreviated form. Arrows are also required to indicate the directional flow of the contents. Legends should be brief, pointed, and simple for greatest effectiveness. Contents should be identified with sufficient additional details such as temperature, pressure, etc., as are necessary to identify the hazard.
- Legends shall be installed close to valves
- Legends shall be installed near branches and whenever a pipe changes direction.
- Legends shall be installed before and after all wall, floor and ceiling penetrations.
- Legends shall be at frequent intervals on straight pipe runs. Brimar recommends 20 ft.
- Legends shall be installed on pipes to achieve the best visibility.
| Size | Width | Height | Min Pipe Diameter |
Max Pipe Diameter |
Average Text Size |
Available Materials | Diagram |
|---|---|---|---|---|---|---|---|
| 8 × 1⅛″ (Fits ¾–1¼″ Pipe OD) | 8″ | 1⅛″ | ¾″ | 1¼″ | ½″ |
|
Diagram |
| 8 × 1⅛″ (Fits 1½–2⅜″ Pipe OD) | 8″ | 1⅛″ | 1½″ | 2⅜″ | ¾″ |
|
Diagram |
| 14 × 2¼″ (Fits 2½–7⅞″Pipe OD) | 14″ | 2¼″ | 2½″ | 7⅞″ | 1¼″ |
|
Diagram |
| 24 × 4″ (Fits 8–10″ Pipe OD) | 24″ | 4″ | 8″ | 10″ | 2½″ |
|
Diagram |
| 32 × 4″ (Fits 10″+ Pipe OD) | 32″ | 4″ | 10″ | N/A | 3½″ |
|
Diagram |
| Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
|---|---|---|---|---|
| Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. | 3.2 mils | 4 to 5 Years | -20° F to 200° F / -29° C to 93° C |
|
| None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
|---|---|---|---|---|
| ATSM D956 Type | – | Type I | Type IV | Type IX |
| Brightness | – | Standard Material | 3x More | 10x More |
| Night-Time Visibility | – | 500' | 1,000' | 1,500' |
| Reflectivity |
|
|
|
|
Using the latest printing processes, your Access Door Pipe Marker is printed without set-up charges or minimums. These advanced digital processes also reduce set-up times, helping to get your Access Door Pipe Marker shipped out faster than ever. SafetySign.com prints your graphics and text straight onto the substrate with UV and chemical resistant ink printed to ensure durability in commercial and industrial settings.
Printing Methods
Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
Fonts
The text is printed in Arial Bold font.
The Access Door Pipe Marker from SafetySign.com uses this font to create a bold message that stands out in order to grab your attention, while also remaining clearly legible at the maximum safe viewing distance of the product.
