Roll-Up and Rigid Aluminum Signs
Advance Warning Rigid and flexible "roll-up" signs may be used for mobile, short duration and short term stationary work. Rigid signs must be mounted at least 5 feet above grade (7 feet where there are pedestrians or parked cars) for visibility and to avoid windshield penetration if they are impacted. Roll-Up signs must be mounted at least one foot above grade. Use retro reflectorized rigid signs for night work.
The signs below are available in 18″, 24″, 30″, 36″ rigid aluminum, and 36″ for roll-up materials.
Roll-up signs lead time is 15 days after approval. Rigid aluminum signs ship within 3 - 5 business days.
Need to design a custom sign but don’t see a template you like? Email us directly at sales@safetysign.com.
-
Loading…This page could not be loaded. Please try again or contact customer service for assistance.
Due to its diamond shape, text will occasionally display outside the margins of the sign. Text and Graphics will be edited, fitted and reviewed by our design team prior to printing.
Image and Text will be adjusted to fit proportionately inside diamond before production. Looking to have your logo printed? Get in touch with our customer service team and they will provide you with a quote.
PrevNextPrevNextPrevNextPrevNextSizes 18″, 24″ and 30″ are only available in rigid aluminum. 36″ and 48″ are offered in rigid aluminum and roll-up sign materials.
This sign is available in either Rigid Aluminum or Roll-Up materials. See options below.
Material Visibility Resistance Outdoor Durability Service Temperature Info N/AFading and Mild Chemicals5 to 7 Years-40° to 212° FGood ReflectiveFading and Mild ChemicalsUp to 7 Years-10°F - 130°FGood ReflectiveFading and Mild ChemicalsUp to 7 Years-10°F - 130°FBetter ReflectiveFading and Mild Chemicals7 to 10 Years-10°F - 130°FBetter ReflectiveFading and Mild Chemicals7 to 10 Years-10°F - 130°FBest ReflectiveN/A10+ Years-10°F - 130°FBest ReflectiveN/A10+ Years-10°F - 130°FBest ReflectiveN/AUp to 3 Years-10°F - 130°FBest ReflectiveN/A10+ Years-10°F - 130°FDay Time Use OnlyN/AUp to 3 YearsN/AMinimum ReflectivityN/AUp to 3 YearsN/AMinimum ReflectivityN/AUp to 3 YearsN/AMinimum ReflectivityMild ChemicalsUp to 3 YearsN/AMinimum ReflectivityMild ChemicalsUp to 3 YearsN/AHigher photometric performanceMild ChemicalsUp to 3 YearsN/AHigher photometric performanceMild ChemicalsUp to 3 YearsN/AHigher photometric performanceMild ChemicalsUp to 3 YearsN/ARigid aluminum diamonds are supplied with 3/8" dia. mounting holes. Hole configuration is as follows: 18″, 24″, 30″ and 36″ diamonds have 2 holes (top and bottom), 48″ diamonds have 4 mounting holes. Roll-Up materials have two rib options, with and without flag assembly.
View illustration of mounting holes and rib options.ALL ROLL-UP SIGNS INCLUDE VELCRO LOOP FOR STORAGE PURPOSES. This is different than the velcro overlay option listed below.
Please click here for details.
The options are:
1. None (no laminate) or Anti-Graffiti Film, applicable only to Aluminum Signs.
2. Velcro options for Roll-Up materials
Is your sign going to need velcro strips over all or some of the words? Please specify the requirement in the instructions field below. Velcro strips are optional, and typically used on signs with variable messages.Looking for a proof? Don’t use this comment box — You will get to set your printing options for supported products after adding to cart.
Road Work Ahead Roll-Up SignPrices are for your custom sign.
Recommended Accessories
Frequently Purchased Together
Product Information
Roll-Up Signs
Roll-up signs material grades
- Fluorescent Non-Reflective Solid Vinyl signs are recommended for day time use only, this material is not MUTCD compliant when used at night.
- Fluorescent Super Bright Reflective Vinyl signs are MUTCD compliant when used day or night.
- Flourescent Marathon Reflective Vinyl signs are MUTCD compliant when used day or night.
Roll-Up Sign Bracket Compatibility
- Compatible with Latch Brackets.
- Compatible with Universal Brackets.
- Compatible with all Roll-up Brackets.
- View and order sign stands with roll-up bracket options.
Roll-Up Sign Features
36" Sign
- Unit Weight, without flags: 4 lb
- Unit Weight, with flags: 5 lb
- Storage Size: 4" x 4" x 50"
48" Sign
- Unit Weight, without flags: 6 lb
- Unit Weight, with flags: 7 lb
- Storage Size: 4" x 4" x 68"
Roll-Up Sign with Flag Assembly
Standard orange flags or flashing warning lights may be used in conjunction with signs.
When standard orange flags or flashing warning lights are used in conjunction with signs, they shall not block the sign face.
Our folding flag system allows permanent attachment of two 18" fluorescent orange vinyl flags. Flags roll up with the sign for easy storage and fast deployment. Sliding clips quickly lock flags in their open position.
Roll-Up Sign Plastic Corner Pockets
At 3/4" deep, the Delta Rib Pocket is designed to be easier to deploy than conventional pockets. Made of tough polycarbonate, it features increased strength and the smallest storage diameter in the industry.
Featuring a full depth design, rectangular pockets are typically used at the top and bottom of the sign. Made of tough polycarbonate, they will fit all pocket style sign holders.
Rigid Aluminum Signs
Rigid signs material grades
- .080" Rust-Free Aluminum signs are recommended for day time use only, this material is not MUTCD compliant when used at night.
- .080" Fluorescent Diamond Grade Work Zone Reflective Aluminum signs are MUTCD compliant when used day or night.
Rigid Sign Bracket / Stand Compatibility
- Compatible only with Rigid Sign Brackets
- List of products on the website with Rigid Sign Brackets
Rigid Sign Features
18" Sign
- Sign weight: 2 lb
- Mounting holes: 2 holes at 3/8" diameter, positioned top and bottom
24" Sign
- Sign weight: 4 lb
- Mounting holes: 2 holes at 3/8" diameter, positioned top and bottom
30" Sign
- Sign weight: 7 lb
- Mounting holes: 2 holes at 3/8" diameter, positioned top and bottom
36" Sign
- Sign weight: 11 lb
- Mounting holes: 2 holes at 3/8" diameter, positioned top and bottom
48" Sign
- Sign weight: 19 lb
- Mounting holes: 4 holes at 3/8" diameter, positioned in center of sign edges
MUTCD Compliance
2009 Edition Part 6 Figure 6F-2. Methods of Mounting Signs Other Than on Posts
The fourth example shows an orange diamond-shaped sign with a black border and letters with the words "UTILITY WORK AHEAD" in three lines mounted on a vertical pole that is mounted on four horizontal supports. The distance from the bottom of the sign to the bottom of the supports is labeled as "1 ft MIN. above the traveled way." At the top of the sign, three orange flags are shown mounted equidistant apart from each other on short staffs that extend out from the top of the vertical pole at 45-degree angles.
Compliance
Section 6F.18 ROAD (STREET) WORK Sign (W20-1)
Guidance
- The ROAD (STREET) WORK (W20-1) sign which serves as a general warning of obstructions or restrictions, should be located in advance of the work space or any detour, on the road where the work is taking place.
Standard
- The ROAD (STREET) WORK (W20-1) sign shall have the legend ROAD (STREET) WORK, XX FEET, XX MILES, or AHEAD.
Source: 2009 MUTCD
When to Use 36″ and 48″ Temporary Warning Signs
According to the MUTCD:
Type of Roadway | Sign Size |
---|---|
Conventional Road | 36 × 36″ |
Freeway or Expressway | 48 × 48″ |
Transportation engineers may find this answer acceptable since they have a deeper understanding of the MUTCD than most, but not everyone has this knowledge. Luckily, definitions of these terms are provided to help make some sense of what they are trying to convey. Here’s how the MUTCD defines each of those types of roadways:
- "Conventional Road" is a "street or highway other than a low-volume road, expressway, or freeway."
- "Low-Volume Road" is a facility lying outside of developed areas of cities, towns, and communities, which serves fewer than 400 vehicles per day on average. A low-volume road shall not be a freeway, an expressway, an interchange ramp, a freeway service road, a road on a designated State highway system, or a residential street in a neighborhood.
- "Expressway" is a divided highway with partial control of access.
- "Freeway" is a divided highway with full control of access.
Still confused? It's not just you. Generally speaking, if the road is a divided highway with a concrete barrier or median, a 48 × 48″ sign will be required. A 36 × 36″ sign can be used on all other types of roadways.
Details
Roll-Up Signs
Let motorists know they should be alert as they come across road work, construction, or men at work. This orange Road Work Ahead sign is available in reflective and non-reflective versions, and as roll-up vinyl or aluminum materials. This Road Work Ahead Temporary Traffic Control Sign is MUTCD TTC and MUTCD W20-1 compliant and includes velcro strips for overlays.
Roll-up signs material grades
- Fluorescent Non-Reflective Solid Vinyl signs are recommended for day time use only, this material is not MUTCD compliant when used at night.
- Fluorescent Super Bright Reflective Vinyl signs are MUTCD compliant when used day or night.
Roll-Up Sign Bracket Compatibility
- Compatible with Latch Brackets.
- Compatible with Universal Brackets.
- Compatible with all Roll-up Brackets.
- View and order sign stands with roll-up bracket options.
Roll-Up Sign Features
- Unit Weight, without flags: 4 lb
- Unit Weight, with flags: 5 lb
- Storage Size: 4" x 4" x 50"
Roll-Up Sign with Flag Assembly
Our folding flag system allows permanent attachment of two 18" fluorescent orange vinyl flags. Flags roll up with the sign for easy storage and fast deployment. Sliding clips quickly lock flags in their open position.
Roll-Up Sign Plastic Corner Pockets
At 3/4" deep, the Delta Rib Pocket is designed to be easier to deploy than conventional pockets. Made of tough polycarbonate, it features increased strength and the smallest storage diameter in the industry.
Featuring a full depth design, rectangular pockets are typically used at the top and bottom of the sign. Made of tough polycarbonate, they will fit all pocket style sign holders.
The image above shows the overlay size applicable to this legend for either the 36" or 48" sign.
Overlay Option
Several of the roll-up signs on this website will have velcro added to specific words that allows for multiple messages to be displayed using a single roll-up sign. Overlays are made from the same material as the sign and come with velcro strips on the back.
Rigid Aluminum Signs
Rigid signs material grades
- .080" Fluorescent Diamond Grade Work Zone Reflective Aluminum signs are MUTCD compliant when used day or night.
Rigid Sign Bracket / Stand Compatibility
- Compatible only with Rigid Sign Brackets
- List of products on the website with Rigid Sign Brackets
Rigid Sign Features
- Sign weight: 11 lb
- Mounting holes: 2 holes at 3/8" diameter, positioned top and bottom
MUTCD Compliance
2009 Edition Part 6 Figure 6F-2. Methods of Mounting Signs Other Than on Posts
The fourth example shows an orange diamond-shaped sign with a black border and letters with the words "UTILITY WORK AHEAD" in three lines mounted on a vertical pole that is mounted on four horizontal supports. The distance from the bottom of the sign to the bottom of the supports is labeled as "1 ft MIN. above the traveled way." At the top of the sign, three orange flags are shown mounted equidistant apart from each other on short staffs that extend out from the top of the vertical pole at 45-degree angles.