Red Banding Tape
Red Banding Tape meets ANSI/ASME A13.1-2015 compliance for the identification of pipes. The Red Banding Tape is blank, with no legend or symbols. Each roll is 30 yards long.
Product Information
Compliance
BRIMAR PREMIUM BANDING TAPE
Product Compliance:
- ANSI / ASME A13.1-2015 "Scheme for the Identification of Piping Systems"
- ANSI Z535.1 "Safety Color Code"
- LEED Compliance: This product complies with the Standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for Commercial Adhesives pertaining to Volatile Organic Compounds (VOC). The adhesive backing on this product contains < 4.4 grams / Liter VOC.
Material:
Outdoor Grade 3.2 mil thick high gloss adhesive-backed calendered vinyl film, printed using UV and chemical resistant inks, to ensure durability in most commercial/industrial environments.
Use:
Liner mounted adhesive tape. Banding & Arrow Tapes are often used in conjunction with EZ Pipe Markers to identify the directional flow of pipe content and to fully comply with ANSI /ASME A13.1 2015. Tape provides a 360° visible color code and locator for the actual marker, which indicates pipe content.
Adhesive:
Aggressive Acrylic Adhesive formulated to adhere to a variety of insulated and non-insulated pipe surfaces.
Surface Preparation:
The surface must be dry and reasonably clean before applying adhesive-backed label products. Minimum Surface Temperature 50° F (10° C)
- Outdoor Durability
- 4 to 5 years Mid Continental US.
- Abrasion Resistance
- Good.
- Water Resistance
- Good.
- Solvent Resistance
- Good.
- Service Temp
- -20°F (-29°C) to 200°F (93°C)
- Storage Stability
- 2 years at 70°F (21° C) with 50 RH.
