Custom Floor Signs
The stock floor sign you’ve selected on the previous page has become a custom sign, personalize it by changing its size, material, or by adding new or different custom text.
Keep your employees and guests healthy by marking your floor with non-slip social distancing floor signs. Design options are available to send exactly the right message to remind everyone of requirements to keep six feet apart from others while in your facility. Additional designs can remind people where to stand when in line, enforce one-way policies in aisles, and where guests may enter and exit.
The image shown to the right is for preview purposes only. Actual product may appear slightly different. We will fix any content in your design that is too close to or beyond the edge of your sign.
You may also upload your own design by choosing a blank white template in step one and the “Upload Your Own Design” layout in step two.
Need to design a custom sign but don’t see a template you like? Email us directly at sales@safetysign.com.
-
Loading…This page could not be loaded. Please try again or contact customer service for assistance.
Choose the layout with which you’ll design your sign. All layouts support up to three pieces of content. The fewer images you need, the more text you can provide and vice versa.
Type the text to be printed around the top edge of your sign. This text will replace the curved “Top Text” in the preview to the right even though it displays outside of the sign here in your web browser.
If you do not want any text placed in the curved "Top Text" section, leave the text box below blank.Choose the color of the text to be printed around the top edge of your sign. This text will replace the color of the curved “Top Text” in the preview to the right even though it displays outside of the sign here in your web browser.
Type the text to be printed around the bottom edge of your sign. This text will replace the curved “Bottom Text” in the preview to the right even though it displays outside of the sign here in your web browser.
If you do not want any text placed in the curved "Bottom Text" section, leave the text box below blank.Choose the color of the text to be printed around the top edge of your sign. This text will replace the color of the curved “Top Text” in the preview to the right even though it displays outside of the sign here in your web browser.
Type the text within the header of your sign. Don’t worry if any of your text protrudes beyond the printable area. Our graphics team will touch up the text before printing to make it fit perfectly.
Choose or upload the header image for your sign. Don’t worry if parts of your image protrude beyond the printable area. Our graphics team will touch up the layout before printing to make it fit perfectly.
For Best Results: PDF, AI, EPS, PS
Other Supported File Types: BMP, JPG, PNG, PSD, SVG, TIF
Files up to 20 MB are supported.
By uploading your file, you warrant that you own or control its rights.
Choose FilePrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextChoose the color of the header text/image within your sign.
Type the first area of text within your sign. Don’t worry if any of your text protrudes beyond the printable area. Our graphics team will touch up the text before printing to make it fit perfectly.
Choose the color of the first area of text within your sign.
Type the second area of text within your sign. Don’t worry if any of your text protrudes beyond the printable area. Our graphics team will touch up the text before printing to make it fit perfectly.
Choose the color of the second area of text within your sign.
Type the third area of text within your sign. Don’t worry if any of your text protrudes beyond the printable area. Our graphics team will touch up the text before printing to make it fit perfectly.
Choose the color of the third area of text within your sign.
Choose or upload the first image for your sign. Don’t worry if parts of your image protrude beyond the printable area. Our graphics team will touch up the layout before printing to make it fit perfectly.
For Best Results: PDF, AI, EPS, PS
Other Supported File Types: BMP, JPG, PNG, PSD, SVG, TIF
Files up to 20 MB are supported.
By uploading your file, you warrant that you own or control its rights.
Choose FilePrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextChoose the color of the first image for your sign. Not applicable if the image is one you’ve uploaded.
Choose or upload the second image for your sign. Don’t worry if parts of your image protrude beyond the printable area. Our graphics team will touch up the layout before printing to make it fit perfectly.
For Best Results: PDF, AI, EPS, PS
Other Supported File Types: BMP, JPG, PNG, PSD, SVG, TIF
Files up to 20 MB are supported.
By uploading your file, you warrant that you own or control its rights.
Choose FilePrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextChoose the color of the second image for your sign. Not applicable if the image is one you’ve uploaded.
Type the text within the footer of your sign. Don’t worry if any of your text protrudes beyond the printable area. Our graphics team will touch up the text before printing to make it fit perfectly.
Choose or upload the footer image for your sign. Don’t worry if parts of your image protrude beyond the printable area. Our graphics team will touch up the layout before printing to make it fit perfectly.
For Best Results: PDF, AI, EPS, PS
Other Supported File Types: BMP, JPG, PNG, PSD, SVG, TIF
Files up to 20 MB are supported.
By uploading your file, you warrant that you own or control its rights.
Choose FilePrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextPrevNextChoose the color of the footer text/image within your sign.
Upload your design here. Before uploading, make sure the size and shape of your artwork matches the options you chose above.
For Best Results: PDF, AI, EPS, PS
Other Supported File Types: BMP, JPG, PNG, PSD, SVG, TIF
Files up to 20 MB are supported.
By uploading your file, you warrant that you own or control its rights.
Choose FilePrevNextTwo grades of adhesive-backed vinyl floor signs are available. Both are protected with non-slip, waterproof laminates.
Apply to smooth, clean, dry, and even surfaces. Buyer should test in non-conspicuous area before proceeding.
When removed, there may be some residue of adhesive that can be removed with detergent, depending on the surface. It’s also possible the adhesive will remove dirt from the surface, leaving the appearance of residue.
Use the information icons below for more details, including application and removal instructions.Material Resistance Service Temperature Info Water, Mild Detergents-40° to 120° FWater, Mild Detergents-40° to 120° FPlease let us know if you have any other information you would like us to know about your custom floor signs.
Looking for a proof? Don’t use this comment box — You will get to set your printing options for supported products after adding to cart.
Warning Forklift Traffic Floor SignPrices are for your custom sign.
Recommended Accessories
Frequently Purchased Together
Product Information
20 Mil Heavy-Duty Semi-Permanent Adhesive-Backed Vinyl
- Laminated with a textured, non-slip surface that also protects against water and mild detergents.
- Apply to smooth, clean, dry, and even surfaces in excellent condition, indoors or outdoors. May also be used temporarily on most low-pile carpeting for several months. Avoid areas that are subject to traffic from heavy equipment, such as forklifts. Do not overlap floor signs.
- To apply, be sure the floor is above 55° F. Clean floor prior to application. A small amount of water may be lightly sprayed over the placement area to make installation easier. Starting at one corner, simultaneously peel backing paper and apply floor sign to floor. Smooth out lightly using a squeegee from the center to the edges. Do not smooth with your hands. Continue with firm, overlapping strokes from the center out to each edge, peeling back the paper backing as you go. Be sure that all edges and corners are firmly attached.
- After applying, do not scrub or polish area on or surrounding floor signs for at least 48 hours. After 48 hours, the floor sign will maintain adherence within the service temperature range of -40° to 120° F.
- When removed, there may be some residue of adhesive that can be removed with detergent, depending on the surface. It’s also possible the adhesive will remove dirt from the surface, leaving the appearance of residue.
- Buyer should test in non-conspicuous area before installing.
10 Mil Commercial-Grade Removable Adhesive-Backed Vinyl
- Laminated with a smooth, non-slip surface that also protects against water and mild detergents.
- Apply to smooth, clean, dry, and even surfaces in excellent condition. May be used on commercial floor tiles, sealed wood, sealed concrete, waxed vinyl, marble, terrazzo, and ceramic tiles. Not for use outdoors or on carpet. Avoid areas that are subject to traffic from heavy equipment, such as forklifts. Do not overlap floor signs.
- To apply, be sure the floor is above 50° F. Clean floor prior to application. A small amount of water may be lightly sprayed over the placement area to make installation easier. Starting at one corner, simultaneously peel backing paper and apply floor sign to floor. Smooth out lightly using a squeegee from the center to the edges. Do not smooth with your hands. Continue with firm, overlapping strokes from the center out to each edge, peeling back the paper backing as you go. Be sure that all edges and corners are firmly attached.
- After applying, do not scrub or polish area on or surrounding floor signs for at least 48 hours. After 48 hours, the floor sign will maintain adherence within the service temperature range of -40° to 120° F.
- When removed, there may be some residue of adhesive that can be removed with detergent, depending on the surface. It’s also possible the adhesive will remove dirt from the surface, leaving the appearance of residue.
- Buyer should test in non-conspicuous area before installing.
Details
Anti-slip Floor Markers
Warn Against Potential Hazards And Provide an Anti-Slip Surface At The Same Time.
- Anti-Slip Safety Floor Markers
- Often the best place and sometimes the only place for an important message is the floor or your facility.
- Our floor markers have a heavy clear textured surface that allows messages to be read while at the same time providing an anti-skid surface.
- Strong adhesive and tough overlamination make these markers durable enough for the heaviest traffic areas.
Product Description:
- Floor markers are manufactured with 4 mil adhesive backed vinyl film.
- Supplied with a heavy adhesive backing for permanent adhesion to any surface.
- Overlaminated with clear Anti-Slip PVC (clear overlamination).
- Clear overlamination consists of a coarse textured resilient top surface.
- Non-abrasive embossed clear overlamination.
- Easily cleaned and mop friendly.
- Material Flexibility For All Materials: Conform to either curved or flat surfaces.
- Service Temp Range For All Materials: 0°F to 122°F.
- Floor markers are available in 3 standard sizes:
- 17-1/2” Circles
- 24 x 6” Rectangles
- 14 x 20” Signs
- Application for Markers other than Glow in the Dark: Ideal for either indoor or outdoor use.
- Surface Preparation For All Materials: smooth, oil-free clean and dry surface.
- Min. Application Temp For All Materials: 50° F.
- New “Glow in the Dark” floor markers for low light or no light applications.
- Glow in the dark material typically used in no light and low light applications, as well as emergency situations of power loss. Ideal to identify emergency exits and equipment. Signs will glow for 10 hours in continuous darkness. Material is charged by any light source in 15 to 60 minutes, depending on light intensity. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res. A.752 (18), JIS Z9100, NYC RS6-1.
- Printed image will resist fading and mild chemicals.
- Glow in the Dark Markers Type of light source - cool white light sources, such as fluorescent lighting and sunshine, are excellent activators. Soft warm lighting, such as incandescent light bulbs, is at the lower activation end.
- Glow in the Dark Markers Length of Illumination - at least 60 minutes of activation are recommended.
- Glow in the Dark Markers Outdoor Durability - Indoor use only.