We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
3″ Diamond
|
|||||
---|---|---|---|---|---|
Material | Packaging | Mounting Holes | Sku | Quantity/Price | |
|
|||||
.030″ Magnetic Sheeting | Sold Individually | No holes | M3361-3MG | $8.95 | |
.055″ Polyethylene Plastic | Sold in Packages of 5 | Four 7/32″ holes (one in each corner) | M3361-3PL | $21.80 | |
3.5 Mil Peel and Stick Vinyl Label | Sold in Packages of 5 | N/A | M3361-3PS | $15.25 |
6″ Diamond
|
|||||
---|---|---|---|---|---|
Material | Packaging | Mounting Holes | Sku | Quantity/Price | |
|
|||||
.030″ Magnetic Sheeting | Sold Individually | No holes | M3361-6MG | $14.65 | |
.055″ Polyethylene Plastic | Sold in Packages of 5 | Four 7/32″ holes (one in each corner) | M3361-6PL | $28.20 | |
3.5 Mil Peel and Stick Vinyl Label | Sold in Packages of 5 | N/A | M3361-6PS | $17.05 |
9″ Diamond
|
|||||
---|---|---|---|---|---|
Material | Packaging | Mounting Holes | Sku | Quantity/Price | |
|
|||||
.040″ Rust-Free Aluminum | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-9AL | $21.55 | |
.030″ Magnetic Sheeting | Sold Individually | No holes | M3361-9MG | $18.40 | |
.055″ Polyethylene Plastic | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-9PL | $16.75 | |
3.5 Mil Peel and Stick Vinyl Label | Sold Individually | N/A | M3361-9PS | $7.60 |
11″ Diamond
|
|||||
---|---|---|---|---|---|
Material | Packaging | Mounting Holes | Sku | Quantity/Price | |
|
|||||
.040″ Rust-Free Aluminum | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-11AL | $23.90 | |
.030″ Magnetic Sheeting | Sold Individually | No holes | M3361-11MG | $20.50 | |
.055″ Polyethylene Plastic | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-11PL | $19.70 | |
3.5 Mil Peel and Stick Vinyl Label | Sold Individually | N/A | M3361-11PS | $8.15 |
15″ Diamond
|
|||||
---|---|---|---|---|---|
Material | Packaging | Mounting Holes | Sku | Quantity/Price | |
|
|||||
.040″ Rust-Free Aluminum | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-15AL | $28.35 | |
.030″ Magnetic Sheeting | Sold Individually | No holes | M3361-15MG | $28.90 | |
.055″ Polyethylene Plastic | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-15PL | $25.75 | |
3.5 Mil Peel and Stick Vinyl Label | Sold Individually | N/A | M3361-15PS | $11.50 |
20″ Diamond
|
|||||
---|---|---|---|---|---|
Material | Packaging | Mounting Holes | Sku | Quantity/Price | |
|
|||||
.040″ Rust-Free Aluminum | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-20AL | $42.75 | |
.030″ Magnetic Sheeting | Sold Individually | No holes | M3361-20MG | $47.15 | |
.055″ Polyethylene Plastic | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-20PL | $32.55 | |
3.5 Mil Peel and Stick Vinyl Label | Sold Individually | N/A | M3361-20PS | $16.75 |
24″ Diamond
|
|||||
---|---|---|---|---|---|
Material | Packaging | Mounting Holes | Sku | Quantity/Price | |
|
|||||
.040″ Rust-Free Aluminum | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-24AL | $47.50 | |
.055″ Polyethylene Plastic | Sold Individually | Four 7/32″ holes (one in each corner) | M3361-24PL | $37.75 | |
3.5 Mil Peel and Stick Vinyl Label | Sold Individually | N/A | M3361-24PS | $19.70 |
Phone: 800-274-6271
Fax: 800-279-6897
Viewing Distance*
* Under favorable viewing conditions.
NFPA 704 - A Quick Overview
What is NFPA 704?
NFPA 704 is the standard that is intended to provide a simple, readily recognized, and easily understood system of markings. These markings will provide a general idea of the hazards of a material and the severity of these hazards as they relate to emergency response.
In more specific terms the objectives of the system are to:
- To provide an appropriate signal or alert and on-the-spot information to safeguard the lives of both public and private emergency response personnel
- To assist in planning for effective fire and emergency control operations, including cleanup
- To assist all designated personnel, engineers, and plant and safety personnel in evaluating hazards
The system shall also enable fire-fighting, emergency, and other personnel to easily decide whether to evacuate the area or to commence emergency control procedures. It shall also assist those personnel in selecting fire-fighting tactics and emergency procedures.
Where do I need to post NFPA 704 signs?
Signs shall be in locations approved by the authority having jurisdiction and as a minimum shall be posted at the following locations:
- Two exterior walls or enclosures containing a means of access to a building or facility
- Each access to a room or area
- Each principal means of access to an exterior storage area
What do the colors and ratings in each diamond mean?
Blue - Health Hazard Rating This relates to the capability of a material to cause personal injury due to contact with or entry into the body via inhalation, skin contact, eye contact, or ingestion. All ratings are determined under emergency conditions. |
|
4 | Materials that can be lethal |
3 | Materials that can cause serious or permanent injury |
2 | Materials that can cause temporary incapacitation or residual injury |
1 | Materials that can cause significant irritation |
0 | Materials that would offer no hazard beyond that of ordinary combustible material |
Red - Flammability Hazard Rating This relates to the degree of susceptibility of materials to burning. |
|
4 | Materials that rapidly or completely vaporize at atmospheric pressure and normal ambient temperature or that are readily dispersed in air and burn readily |
3 | Liquids and solids (including finely divided suspended solids) that can be ignited under almost all ambient temperature conditions |
2 | Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur |
1 | Materials that must be preheated before ignition can occur |
0 | Materials that will not burn under typical fire conditions |
Yellow - Instability Hazard Rating This relates to the degree of hazard due to reaction with ambient air, light, or both, and the degree of intrinsic susceptibility of materials to release energy by self-reaction or polymerization. |
|
4 | Materials that in themselves are readily capable of detonation or explosive decomposition or explosive reaction at normal temperatures and pressures |
3 | Materials that in themselves are capable of detonation or explosive decomposition or explosive reaction, but require a strong initiating source or must be heated under confinement before initiation |
2 | Materials that readily undergo violent chemical change at elevated temperatures and pressures |
1 | Materials that in themselves are normally stable, but which can become unstable at elevated temperatures and pressures |
0 | Material that in themselves are normally stable, even under fire conditions |
White - Special Hazards This area of the diamond shall address water reactivity and oxidizing properties of the materials that cause special problems or require special fire-fighting techniques. |
|
OX | Material possesses oxidizing properties |
![]() |
Material that reacts violently or explosively with water |
SA | Material is a simple asphyxiant |
Non-Standard Special Hazard Symbols These special hazard symbols and others are not part of the NFPA 704 standard, but may be used if permitted by the authority having jurisdiction. |
|
ACID | Material is an acid |
ALK | Material is a base (alkali) |
COR | Material is corrosive |
CRY | Material is cryogenic |
POI | Material that is poisonous |
![]() |
Material is radioactive |
For a more detailed look at NFPA 704, please visit our Help Center.
SafetySign.com does not recommend or specify the use of a specific safety sign because it does not have knowledge of the hazard(s) our customers are identifying. It is the customer’s sole responsibility to identify the hazard(s) that may be present and select one or more signs (stock or custom) that accurately identify their specific hazard(s) and complies with any applicable federal, state or local laws or regulations, any worksite specific rules or regulations and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). SafetySign.com disclaims any and all liability (excluding liability for our Product Warranty contained in our Terms and Conditions) for any sign selected by a customer and shall not be responsible for any personal injury or property damage resulting from the use of signs purchased from it or for the independent interpretation made of any applicable federal, state or local laws or regulations, any worksite specific rules or regulations, and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). Customer shall indemnify and hold SafetySign.com and its corporate parent and its officers, directors and affiliates harmless from and against any and all claims, loss or expense (including attorneys’ fees) arising from or related to the purchase and use by customer or any third party of any sign purchased by customer from SafetySign.com.
Size | Width | Height | Average Text Size |
Max Viewing Distance |
Available Materials | Mounting Holes | Diagram |
---|---|---|---|---|---|---|---|
3″ Diamond | 3″ | 3″ | 1″ | Up to 50′ |
|
N/A | Diagram |
|
No Holes | Diagram | |||||
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | Diagram | |||||
6″ Diamond | 6″ | 6″ | 2″ | Up to 75′ |
|
N/A | Diagram |
|
No Holes | Diagram | |||||
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | Diagram | |||||
9″ Diamond | 9″ | 9″ | 3″ | Up to 100′ |
|
N/A | Diagram |
|
No Holes | Diagram | |||||
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | Diagram | |||||
11″ Diamond | 11″ | 11″ | 4″ | Up to 200′ |
|
N/A | Diagram |
|
No Holes | Diagram | |||||
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | Diagram | |||||
15″ Diamond | 15″ | 15″ | 6″ | Up to 300′ |
|
N/A | Diagram |
|
No Holes | Diagram | |||||
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | Diagram | |||||
20″ Diamond | 20″ | 20″ | 8″ | Up to 400′ |
|
N/A | Diagram |
|
No Holes | Diagram | |||||
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | Diagram | |||||
24″ Diamond | 24″ | 24″ | 10″ | Up to 500′ |
|
N/A | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | Diagram |
Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
---|---|---|---|---|
Labels | ||||
Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. | 3.5 mils | 4 to 5 Years | -20° to 176° F |
|
Plastic | ||||
Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures. | 0.055″ | 3 to 5 Years | -40° to 180° F |
|
Magnetic | ||||
Magnetic Sheeting 0.03" thick magnetic material includes a layer of outdoor white vinyl, resists cracking and chipping, and easily mounts to steel and other ferromagnetic metals. It is flexible enough to mount on curved surfaces and ideal for signage that will be frequently changed. | 0.03″ | 2 to 3 Years | 0° to 158° F |
|
Aluminum | ||||
Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. | 0.04″ | 5 to 7 Years | -40° to 212° F |
|




None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
---|---|---|---|---|
ATSM D956 Type | – | Type I | Type IV | Type IX |
Brightness | – | Standard Material | 3x More | 10x More |
Night-Time Visibility | – | 500' | 1,000' | 1,500' |
Reflectivity |
|
|
|
|


SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.

The text is printed in Swis721 BlkCn BT font.
The NFPA Diamond 2-4-0 from SafetySign.com uses this font because it is legible, and makes the message stand out and command your attention.
- All
- Brackets
- Hardware
- Special Hazards
- Tape
- Ties