We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
NFPA Diesel Fuel 1-2-0 Sign
- Item #:
- M3348
- Label Reads:
- Danger Diesel Fuel No Smoking No Open Flames NFPA Rating 1-2-0
- Label Design:
- International No Smoking And International No Open Flames Symbols
- Compliance:
-
- ANSI Z535 / OSHA
- NFPA
- LEED Compliant
Other configurations of this product
Note:
The hazard identification (NFPA rating) for this sign was obtained from the Fire Protection Guide to Hazardous Materials 14th Edition.
An NFPA Diesel Fuel 1-2-0 Sign has official ANSI headers for safety protocol and compliance. An NFPA Diesel Fuel 1-2-0 Sign is a useful tool to help protect the health and safety of staff, and is not a substitute for necessary protective measures for lessening or eliminating hazards.
Danger Diesel Fuel No Smoking No Open Flames NFPA Rating 1-2-0
|
7 × 10″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| 3.5 Mil Peel and Stick Vinyl Label | N/A | N/A | M3348-AB | $6.45 | $6.35 | $5.80 | $5.25 | $4.25 | $3.60 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | M3348-BB | $7.20 | $7.00 | $6.80 | $6.60 | $6.20 | $5.25 | ||
| 4 Mil Glow-in-the-Dark Peel and Stick Polyester Label | N/A | N/A | M3348-CB | $12.95 | $12.75 | $12.50 | $12.25 | $11.75 | $10.75 | ||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | M3348-FB | $11.70 | $11.30 | $10.85 | $10.25 | $8.55 | $7.90 | ||
| .046″ Glow-in-the-Dark Plastic | N/A | Four 7/32″ holes (one in each corner) | M3348-L2B | $27.00 | $20.75 | $18.50 | $16.25 | $14.75 | $13.50 | ||
| .040″ Engineering Grade Reflective Aluminum | None | Four 7/32″ holes (one in each corner) | M3348-R2B | $13.15 | $12.85 | $12.30 | $11.25 | $10.00 | $8.60 | ||
|
10 × 14″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| 3.5 Mil Peel and Stick Vinyl Label | N/A | N/A | M3348-AC | $9.95 | $8.50 | $8.15 | $7.85 | $6.95 | $6.05 | ||
| .055″ Polyethylene Plastic | N/A | Four 7/32″ holes (one in each corner) | M3348-BC | $10.35 | $9.85 | $9.35 | $8.75 | $7.45 | $6.25 | ||
| 4 Mil Glow-in-the-Dark Peel and Stick Polyester Label | N/A | N/A | M3348-DC | $19.90 | $17.90 | $16.90 | $16.50 | $15.90 | $14.90 | ||
| .040″ Rust-Free Aluminum | None | Four 7/32″ holes (one in each corner) | M3348-FC | $18.25 | $17.25 | $15.10 | $14.50 | $13.80 | $11.50 | ||
| .046″ Glow-in-the-Dark Plastic | N/A | Four 7/32″ holes (one in each corner) | M3348-L2C | $32.70 | $31.10 | $29.50 | $27.50 | $25.80 | $23.40 | ||
| .040″ Engineering Grade Reflective Aluminum | None | Four 7/32″ holes (one in each corner) | M3348-R2C | $19.95 | $19.20 | $16.75 | $16.25 | $15.75 | $12.25 | ||
|
12 × 18″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .055″ Polyethylene Plastic | None | Four ¼″ holes (one in each corner) | M3348-A85 | $17.75 | $15.50 | $14.75 | $14.25 | $13.75 | $12.85 | ||
| .063″ White Rust-Free Aluminum | None | Four ¼″ holes (one in each corner) | M3348-A8C | $19.75 | $17.75 | $16.75 | $15.75 | $14.75 | $13.75 | ||
| .063″ Engineering Grade Reflective Aluminum | None | Four ¼″ holes (one in each corner) | M3348-A8D | $22.95 | $21.45 | $20.45 | $19.95 | $18.95 | $17.25 | ||
|
18 × 24″
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overlaminate | Mounting Holes | Sku | Quantity/Price | |||||||
|
|||||||||||
| .055″ Polyethylene Plastic | None | Four ¼″ holes (one in each corner) | M3348-B95 | $26.95 | $24.75 | $23.75 | $23.00 | $22.25 | $21.20 | ||
| .080″ White Rust-Free Aluminum | None | Four ¼″ holes (one in each corner) | M3348-B9G | $32.30 | $31.65 | $31.10 | $29.25 | $28.95 | $28.60 | ||
| .080″ Engineering Grade Reflective Aluminum | None | Four ¼″ holes (one in each corner) | M3348-B9H | $33.15 | $32.60 | $32.05 | $31.60 | $31.10 | $30.85 | ||
Special Freight Arrangement:
Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges.
If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.
Phone: 800-274-6271
Fax: 800-279-6897
Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:
Service Temp Range:
Max Recommended
Viewing Distance*
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
* Under favorable viewing conditions.
NFPA 704 - A Quick Overview
What is NFPA 704?
NFPA 704 is the standard that is intended to provide a simple, readily recognized, and easily understood system of markings. These markings will provide a general idea of the hazards of a material and the severity of these hazards as they relate to emergency response.
In more specific terms the objectives of the system are to:
- To provide an appropriate signal or alert and on-the-spot information to safeguard the lives of both public and private emergency response personnel
- To assist in planning for effective fire and emergency control operations, including cleanup
- To assist all designated personnel, engineers, and plant and safety personnel in evaluating hazards
The system shall also enable fire-fighting, emergency, and other personnel to easily decide whether to evacuate the area or to commence emergency control procedures. It shall also assist those personnel in selecting fire-fighting tactics and emergency procedures.
Where do I need to post NFPA 704 signs?
Signs shall be in locations approved by the authority having jurisdiction and as a minimum shall be posted at the following locations:
- Two exterior walls or enclosures containing a means of access to a building or facility
- Each access to a room or area
- Each principal means of access to an exterior storage area
What do the colors and ratings in each diamond mean?
|
Blue - Health Hazard Rating This relates to the capability of a material to cause personal injury due to contact with or entry into the body via inhalation, skin contact, eye contact, or ingestion. All ratings are determined under emergency conditions. |
|
| 4 | Materials that can be lethal |
| 3 | Materials that can cause serious or permanent injury |
| 2 | Materials that can cause temporary incapacitation or residual injury |
| 1 | Materials that can cause significant irritation |
| 0 | Materials that would offer no hazard beyond that of ordinary combustible material |
|
Red - Flammability Hazard Rating This relates to the degree of susceptibility of materials to burning. |
|
| 4 | Materials that rapidly or completely vaporize at atmospheric pressure and normal ambient temperature or that are readily dispersed in air and burn readily |
| 3 | Liquids and solids (including finely divided suspended solids) that can be ignited under almost all ambient temperature conditions |
| 2 | Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur |
| 1 | Materials that must be preheated before ignition can occur |
| 0 | Materials that will not burn under typical fire conditions |
|
Yellow - Instability Hazard Rating This relates to the degree of hazard due to reaction with ambient air, light, or both, and the degree of intrinsic susceptibility of materials to release energy by self-reaction or polymerization. |
|
| 4 | Materials that in themselves are readily capable of detonation or explosive decomposition or explosive reaction at normal temperatures and pressures |
| 3 | Materials that in themselves are capable of detonation or explosive decomposition or explosive reaction, but require a strong initiating source or must be heated under confinement before initiation |
| 2 | Materials that readily undergo violent chemical change at elevated temperatures and pressures |
| 1 | Materials that in themselves are normally stable, but which can become unstable at elevated temperatures and pressures |
| 0 | Material that in themselves are normally stable, even under fire conditions |
|
White - Special Hazards This area of the diamond shall address water reactivity and oxidizing properties of the materials that cause special problems or require special fire-fighting techniques. |
|
| OX | Material possesses oxidizing properties |
|
Material that reacts violently or explosively with water |
| SA | Material is a simple asphyxiant |
|
Non-Standard Special Hazard Symbols These special hazard symbols and others are not part of the NFPA 704 standard, but may be used if permitted by the authority having jurisdiction. |
|
| ACID | Material is an acid |
| ALK | Material is a base (alkali) |
| COR | Material is corrosive |
| CRY | Material is cryogenic |
| POI | Material that is poisonous |
 |
Material is radioactive |
For a more detailed look at NFPA 704, please visit our Help Center.
SafetySign.com does not recommend or specify the use of a specific safety sign because it does not have knowledge of the hazard(s) our customers are identifying. It is the customer’s sole responsibility to identify the hazard(s) that may be present and select one or more signs (stock or custom) that accurately identify their specific hazard(s) and complies with any applicable federal, state or local laws or regulations, any worksite specific rules or regulations and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). SafetySign.com disclaims any and all liability (excluding liability for our Product Warranty contained in our Terms and Conditions) for any sign selected by a customer and shall not be responsible for any personal injury or property damage resulting from the use of signs purchased from it or for the independent interpretation made of any applicable federal, state or local laws or regulations, any worksite specific rules or regulations, and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). Customer shall indemnify and hold SafetySign.com and its corporate parent and its officers, directors and affiliates harmless from and against any and all claims, loss or expense (including attorneys’ fees) arising from or related to the purchase and use by customer or any third party of any sign purchased by customer from SafetySign.com.
| Size | Width | Height | Average Text Size |
Max Viewing Distance |
Available Materials | Mounting Holes | Corner Radius | Diagram |
|---|---|---|---|---|---|---|---|---|
| 7 × 10″ | 7″ | 10″ | ⅜″ | Coming Soon |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram | |||||
| 10 × 14″ | 10″ | 14″ | ½″ | Coming Soon |
|
N/A | ¼″ | Diagram |
|
Four 7/32″ Holes (#10 or 3/16″ screws recommended) | ¼″ | Diagram | |||||
| 12 × 18″ | 12″ | 18″ | ⅝″ | Coming Soon |
|
Four ¼″ Holes (#12 or 7/32″ screws recommended) | ½″ | Diagram |
| 18 × 24″ | 18″ | 24″ | 1″ | Up to 50′ |
|
Four ¼″ Holes (#12 or 7/32″ screws recommended) | ½″ | Diagram |
NFPA 704, the Standard System for the Identification of the Hazards of Materials for Emergency Response, outlines minimum text size requirements to ensure that NFPA 704 signs remain legible at long distances in order to keep emergency personnel safe. In addition to the viewing distance specifications, the standard also provides dimensions of each hazard rating number as it relates to the hazard rating quadrant surrounding it.
It is the responsibility of the end user to determine the viewing distance, and the correct size NFPA 704 sign necessary to alert emergency personnel at a safe distance. According to the NFPA 704 Standard, a ratio of 25 feet of viewing distance per inch of text should be used to determine the minimum text size required up to 100 feet. From 100 to 200 feet, a ratio of 100 feet per inch of text should be used, and from 200 to 300 feet, a ratio of 50 feet per inch of text should be used. The NFPA 704 Standard does not distinguish between favorable or unfavorable viewing conditions.
| Material | Thickness | Outdoor Durability | Service Temp. Range | Available Sizes |
Overlaminate |
|---|---|---|---|---|---|
| Labels | |||||
| Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. | 3.5 mils | 4 to 5 Years | -20° to 176° F |
|
N/A |
| Glow-in-the-Dark Adhesive-Backed Polyester 4 mils thick glow-in-the-dark polyester film with a LEED compliant adhesive, suitable for indoor and outdoor applications. Not resistant to contact with chemicals. This material will glow for up to 10 hours when it is charged with a strong light source for at least 60 minutes. Daylight color is soft-yellow to eggshell white. Color in darkness is photoluminescent yellowish. Storage stability of 1 year. Elongation, 164.0% with a tensile strength of 3.1 K/ 10mm. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res.A.752 (18), JIS Z9100, NYC RS6-1. Clean and dry surface before applying. Minimum application temperature is 60°F (15°C). | 4 mils | Indefinite Indoors / Up to 3 years Outdoors | 120° F (50° C) Max. |
|
N/A |
| Plastic | |||||
| Polyethylene Plastic A tough plastic that is rust free and resistant to chips, cracks, fading and mild chemicals. It is an economical alternative to aluminum without a significant compromise in durability. Thicknesses of .055" and less will easily bend to fit certain surfaces without causing material fractures. | 0.055″ | 3 to 5 Years | -40° to 180° F |
|
N/A |
|
|
||||
| Glow-in-the-Dark Plastic .046" photoluminous plastic will not rust, is resistant to chips and cracks, and will easily bend to certain surfaces without causing material fractures. It is designed for indoor use only. This material can be charged by any light source in as little as 15 minutes, and will glow for up to 10 hours when it is charged with a strong light source for at least 60 minutes. Cool white light sources such as fluorescent lighting and sunshine are excellent activators. Soft warm lighting such as incandescent light bulbs are not as effective. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res. A.752 (18), JIS Z9100, NYC RS6-1. | 0.046″ | Indoor Use Only | N/A |
|
N/A |
| Aluminum | |||||
| Rust-Free Aluminum A durable metal material that will not chip, crack, or rust, offers superior resistance to harsh weather conditions, and has good chemical resistance properties. The optimal choice for outdoor usage. | 0.04″ | 5 to 7 Years | -40° to 212° F |
|
|
| 0.063″ | 5 to 7 Years | -40° to 212° F |
|
|
|
| 0.08″ | 5 to 7 Years | -40° to 212° F |
|
|
|
|
Engineering Grade Reflective Aluminum
A durable enclosed lens retro-reflective material permanently adhered to aluminum. It is an economical choice for non-critical traffic signs, parking lot signs, and safety signs. The pattern free face allows for clean graphic imaging. It meets the requirements of ASTM D4956 Type I, and will remain effective for up to 7 years. Resistant to fading and mild chemicals.
Reflectivity:
|
0.04″ | Up to 7 Years | -10°F - 130°F |
|
|
| 0.063″ | Up to 7 Years | -10°F - 130°F |
|
|
|
| 0.08″ | Up to 7 Years | -10°F - 130°F |
|
|
|
| None | Engineering Grade | High Intensity Prismatic | Diamond Grade | |
|---|---|---|---|---|
| ATSM D956 Type | – | Type I | Type IV | Type IX |
| Brightness | – | Standard Material | 3x More | 10x More |
| Night-Time Visibility | – | 500' | 1,000' | 1,500' |
| Reflectivity |
|
|
|
|
Using the latest digital printing processes to print your NFPA Diesel Fuel 1-2-0 Sign directly onto the sign, SafetySign.com reduces your set-up time, and eliminates any need for set-up charges or minimum orders. These advanced processes allow your NFPA Diesel Fuel 1-2-0 Sign to resist peeling, unlike signs that use a laminate to keep the text and graphics adhered to the sign material.
Printing Methods
Cross-Hatch Ink Adhesion Test
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
Fonts
The text is printed in Arial Black, Arial Bold, and Swis721 BlkCn BT fonts.
The NFPA Diesel Fuel 1-2-0 Sign from SafetySign.com uses these fonts to create a bold message that stands out in order to grab your attention, while also allowing for a large message that remains clearly legible.
Recommended Accessories
- All
- Brackets
- Cones
- Foam Bumpers
- Hardware
- Tape
- Ties
- Tools
8" Long Heavy Duty Nylon Ties
NT8
7.5″ Black UV Resistant Cable Tie - 50 lb Tensile Strength
NT7
30" Silver Yard Sign Stake
Y4995
SignGuardian™ Tamper-Resistant 2" Chain Link Fence Brackets for 7/32” or 1/4" Mounting Holes
Y4963, Y4962
Screwdriver for SignGuardian™ and 1-Way R™ Bolts
Y4965
#10 x 1-1/2" Round Head Screw for Wood
Y4999
3/16 x 1-1/2" Bolting Set (2 bolts, 2 nuts, 4 washers)
Y4997
Corner Foam Bumper
R5600
I-Beam Edge Foam Bumper
R5601
Flat Surface Foam Bumper
R5602
Corner Protector For Foam Bumper
R5604
42" Cone with Reflective Bands and 16lb. Base
X5653
Suction Cups with Hook For Sign Hanging
Y3548
Double-Sided Adhesive Foam Tape
Y3549
Wing Bracket
Y3539
5/32" Cushioned T-Handle Hex Key
Y3522
5/32" L-Handle Hex Key
Y3523
L-Handle Hex Key For Vandal Resistant Set Screws
Y3524
5/32" Hex Bit For Vandal Resistant Set Screws
Y3525
Vandal Resistant Set Screws
Y3526
