We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Do Not Enter Floor Sign
- Item #:
- P4345 and P4378
- Floor Sign Reads:
- Do Not Enter
- English. Also available in Spanish.
|3.5 Mil Peel and Stick Vinyl Label||Waterproof 25 Mil Anti-Slip Surface||P4345||$24.10||$22.55||$21.80|
|4 Mil Glow-in-the-Dark Peel and Stick Polyester Label||Waterproof 25 Mil Anti-Slip Surface||P4378||$35.70||$33.55||$31.45|
ANTI-SLIP FLOOR MARKERS
Warn Against Potential Hazards And Provide an Anti-Slip Surface At The Same Time.
- Anti-Slip Safety Floor Markers:
- Often the best place and sometimes the only place for an important message is the floor or your facility.
- Our floor markers have a heavy clear textured surface that allows messages to be read while at the same time providing an anti-skid surface.
- Strong adhesive and tough overlamination make these markers durable enough for the heaviest traffic areas.
- Floor markers are manufactured with 4 mil adhesive backed vinyl film.
- Supplied with a heavy adhesive backing for permanent adhesion to any surface.
- Over laminated with clear Anti-Slip PVC (clear overlam).
- Clear overlam consists of a coarse textured resilient top surface.
- Non-abrasive embossed clear overlam.
- Easily cleaned and mop friendly.
- Material Flexibility For All Materials: Conform to either curved or flat surfaces
- Service Temp Range For All Materials: 0°F to 122°F
- Floor markers are available in 3 standard sizes:
24 x 6” Rectangles
14 x 20” Signs
- Application for Markers other than Glow in the Dark: Ideal for either indoor or outdoor use.
- Surface Preparation For All Materials: smooth, oil-free clean and dry surface.
- Min. Application Temp For All Materials: 50° F
- New “Glow in the Dark” floor markers for low light or no light applications.
- Glow in the dark material typically used in no light and low light applications, as well as emergency situations of power loss. Ideal to identify emergency exits and equipment. Signs will glow for 10 hours in continuous darkness. Material is charged by any light source in 15 to 60 minutes, depending on light intensity. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res. A.752 (18), JIS Z9100, NYC RS6-1.
- Printed image will resist fading and mild chemicals.
- Glow in the Dark Markers Type of light source - cool white light sources, such as fluorescent lighting and sunshine, are excellent activators. Soft warm lighting, such as incandescent light bulbs, is at the lower activation end.
- Glow in the Dark Markers Length of Illumination - at least 60 minutes of activation are recommended.
- Glow in the Dark Markers Outdoor Durability: Indoor use Only
|17½″ Circle||17½″||2 7/16″||Up to 60′ 11″||
|Material||Thickness||Outdoor Durability||Service Temp. Range||Available
|Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F.||3.5 mils||4 to 5 Years||-20° to 176° F||
|Glow-in-the-Dark Adhesive-Backed Polyester 4 mils thick glow-in-the-dark polyester film with a LEED compliant adhesive, suitable for indoor and outdoor applications. Not resistant to contact with chemicals. This material will glow for up to 10 hours when it is charged with a strong light source for at least 60 minutes. Daylight color is soft-yellow to eggshell white. Color in darkness is photoluminescent yellowish. Storage stability of 1 year. Elongation, 164.0% with a tensile strength of 3.1 K/ 10mm. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res.A.752 (18), JIS Z9100, NYC RS6-1. Clean and dry surface before applying. Minimum application temperature is 60°F (15°C).||4 mils||Indefinite Indoors / Up to 3 years Outdoors||120° F (50° C) Max.||
|None||Engineering Grade||High Intensity Prismatic||Diamond Grade|
|ATSM D956 Type||–||Type I||Type IV||Type IX|
|Brightness||–||Standard Material||3x More||10x More|
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.
The text is printed in Arial Black font.
The Do Not Enter Floor Sign from SafetySign.com uses this font to create a bold message that stands out in order to grab your attention, while also remaining clearly legible at the maximum safe viewing distance of the product.