Texas 30.07 Spanish No Open Carry Floor Sign
Item #
F8153SP-CEC
Floor Sign Reads
Prohibido Portar Armas Cortas Exhibidas Publicamente Conforme A La Sección 30.07 Del Del Código Penal (Sobre El Ingreso Ilicito De Un Individuo Con Licencia De Portacion De Armas Cortas Exhibidas Públicamente) Personas Con Licencia Bajo Del Sub-Capitulo H, Capitulo 411, Código De Gobierno (Ley De Portar Armas). Tiene Prohibido Ingresar En Esta Propiedad Con Armas Cortas Exhibidas Públicamente.
Floor Sign Design
Firearms Prohibited Symbol
Language
Spanish. Also available in English.

Note:

See additional information below

Texas 30.07 Spanish No Open Carry Floor Sign

Compliant with Texas Code Section 30.07(c)(3)(A)

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$29.85
Low Price Guarantee
Qty
Each
  • 1–2
    $29.85
  • 3–4
    $25.45
  • 5–9
    $24.15
  • 10–19
    $20.70
  • 20–39
    $20.10
  • 40+
    $17.65
0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 800‑274‑5271 or email us.

Frequently Purchased Together

Product Information

Details

Spanish Texas 30.07 Floor Sign

Post Spanish Texas 30.07 No Open Carry Floor Signs at all entrances to your property to prohibit the open carry of firearms. You must also purchase the English version of this floor sign (F8153) to be compliant with Texas law.

PLEASE NOTE: This sign does not prevent concealed carry of a handgun or those without a license to carry a handgun on the premises. If you want to prohibit concealed carry, you must also post the 30.06 sign. If you want to prohibit carry of firearms by those without a license, you must post the 30.05 sign.

Texas No Gun Signs FAQ

On September 1, 2021, House Bill 1927 takes into effect, eliminating the requirement for eligible Texas citizens to obtain a state-issued license to carry handguns. Property and business owners must post signs specified by the Texas Penal Code to prohibit the carry of firearms within their premises.

Property owners must post all three signs (30.05, 30.06, and 30.07) in both English and Spanish if they want to prohibit all firearms entirely.

  • Texas 30.05 Sign Texas 30.06 Sign Texas 30.07 Sign
    Use To: Prohibit carry of firearms by persons without a license Prohibit concealed carry by persons with a license Prohibit open carry by persons with a license
    Signs available in SafetySign.com: Bilingual sign, English Only sign, Spanish Only sign Bilingual sign, English Only sign, Spanish Only sign Bilingual sign, English Only sign, Spanish Only sign
    Required Language: English and Spanish English and Spanish English and Spanish
    Required Text Height 1″ minimum in block letters 1″ minimum in block letters 1″ minimum in block letters

Below are the requirements specified by the Texas Penal Code:

  • Texas 30.05 sign must include language that is identical to or substantially similar to the following: "Pursuant to Section 30.05, Penal Code (criminal trespass), a person may not enter this property with a firearm"
  • Texas 30.06 sign must include language identical to the following: "Pursuant to Section 30.06, Penal Code (trespass by license holder with a concealed handgun), a person licensed under Subchapter H, Chapter 411, Government Code (handgun licensing law), may not enter this property with a concealed handgun"
  • Texas 30.07 sign must include language identical to the following: "Pursuant to Section 30.07, Penal Code (trespass by license holder with an openly carried handgun), a person licensed under Subchapter H, Chapter 411, Government Code (handgun licensing law), may not enter this property with a handgun that is carried openly"
  • For all signs: Must be printed in contrasting colors.

Non-Slip Materials

Two grades of adhesive-backed vinyl floor signs are available. Both are protected with non-slip, water resistant laminates.

Apply to smooth, clean, dry, and even surfaces. Buyer should test in non-conspicuous area before proceeding.

When removed, there may be some residue of adhesive that can be removed with detergent, depending on the surface. It’s also possible the adhesive will remove dirt from the surface, leaving the appearance of residue.

20 Mil Heavy-Duty Semi-Permanent Adhesive-Backed Vinyl with Textured Water Resistant Anti-Slip Laminate

  • Textured surface.
  • Temporary use on low-pile carpeting. 20 mil.
  • Resistance: Water, Mild Detergents

Laminated with a textured, non-slip surface that also protects against water and mild detergents.

Apply to smooth, clean, dry, and even surfaces in excellent condition, indoors or outdoors. May also be used temporarily on most low-pile carpeting for several months. Avoid areas that are subject to traffic from heavy equipment, such as forklifts. Do not overlap floor signs.

To apply, be sure the floor is above 55° F. Clean floor prior to application. A small amount of water may be lightly sprayed over the placement area to make installation easier. Starting at one corner, simultaneously peel backing paper and apply floor sign to floor. Smooth out lightly using a squeegee from the center to the edges. Do not smooth with your hands. Continue with firm, overlapping strokes from the center out to each edge, peeling back the paper backing as you go. Be sure that all edges and corners are firmly attached.

After applying, do not scrub or polish area on or surrounding floor signs for at least 48 hours. After 48 hours, the floor sign will maintain adherence within the service temperature range of -40° to 120° F.

When removed, there may be some residue of adhesive that can be removed with detergent, depending on the surface. It’s also possible the adhesive will remove dirt from the surface, leaving the appearance of residue.

Our durable anti-slip floor signs will stick to most smooth, clean, dry surfaces both indoors and outdoors. They can also be used temporarily on most low-pile carpeting for several months. Buyer should test in non-conspicuous area before proceeding.

These heavy-duty floor signs can be removed. Depending on the surface, there may be some residue of adhesive that can be removed with detergent. It’s also possible the adhesive will remove dirt from the surface, leaving the appearance of residue. Buyer should test in non-conspicuous area before proceeding.

10 Mil Commercial-Grade Removable Adhesive-Backed Vinyl with Embossed Water Resistant Laminate

  • Smooth surface. Not for use outdoors or on carpet. 10 mil.
  • Resistance: Water, Mild Detergents

Laminated with a smooth, non-slip surface that also protects against water and mild detergents.

Apply to smooth, clean, dry, and even surfaces in excellent condition. May be used on commercial floor tiles, sealed wood, sealed-concrete, waxed vinyl, marble, terrazzo, and ceramic tiles. Not for use outdoors or on carpet. Avoid areas that are subject to traffic from heavy equipment, such as forklifts. Do not overlap floor signs.

To apply, be sure the floor is above 50° F. Clean floor prior to application. A small amount of water may be lightly sprayed over the placement area to make installation easier. Starting at one corner, simultaneously peel backing paper and apply floor sign to floor. Smooth out lightly using a squeegee from the center to the edges. Do not smooth with your hands. Continue with firm, overlapping strokes from the center out to each edge, peeling back the paper backing as you go. Be sure that all edges and corners are firmly attached.

After applying, do not scrub or polish area on or surrounding floor signs for at least 48 hours. After 48 hours, the floor sign will maintain adherence within the service temperature range of -40° to 120° F.

When removed, there may be some residue of adhesive that can be removed with detergent, depending on the surface. It’s also possible the adhesive will remove dirt from the surface, leaving the appearance of residue.

Reviews

800‑274‑5271
Cart

Your cart is empty.