2" × 3ft Galvanized Square Anchor Post
FHWA approved and compliant with AASHTO specifications
Galvanized Square Anchor Posts are the base post used with traditional corner bolt and sleeve breakaway systems. These posts are 36" (3 ft.) long, 2" wide, and should be used with 1-3/4" square sign posts. These galvanized posts are 12 gauge and have 7/16" holes spaced 1" apart on center.
When installing the anchor post, drive the post into the ground until only 2 holes are exposed. The sign post should be installed 4" into the anchor post and secured using two corner bolts on the same plane. Two corner bolts with jam nuts are included for connecting the anchor post to the sign post.
Square Anchor Post Specifications and Installation
The square post is one of the most versatile posts in the industry and a great choice for displaying traffic signs, parking signs, and property signs. The square shape provides greater wind load capabilities and torsional stability, allows signs to be mounted on all four sides of the post, and enables each subsequent size to fit into the next smallest or larger post.
The use of a square anchor post allows the sign post to perform a breakaway function when impacted by a vehicle, as well as making more of the sign post available for sign mounting. The sections below will detail specifications and installation of square anchor posts.
The following table details the recommended installation depth for square anchor posts. SafetySign.com recommends the use of an anchor post with every post installation to increase safety in the event of a vehicle collision with the post.
Connecting the Sign Post to the Anchor Post
- Insert the sign post 2 to 4″ into the anchor post.
- Insert one corner bolt in the corner of the post farthest from traffic and secure the bolt with the included jam nut.
Optional: A second corner bolt may be used and inserted below the first.