Stainless Steel Strapping - Y3534, Sign Mounting Hardware

Stainless Steel Strapping

Stainless Steel Strapping
Item #:
Y3534
Size:  
Material:  
Packaging:  
Pricing Y3534
Quantity
Price Each:
1+
$89.95
Need a quote for a large order? Call 800-274-6271 or .
Qty:
Total Price: $89.95
✓ Added to Cart
Special freight arrangements are necessary. Learn more
Stainless Steel Strapping is ideal for installing signs on large diameter posts and poles when standard sign mounting brackets won't work. The most common uses for stainless steel strapping are for securing wing type brackets for street name signs, as well as mounting regulatory and warning traffic signs on poles. These rolls of 3/4" x .030” x 100 ft. long stainless steel strapping come in a plastic tote that keeps the strapping organized and allows it to be portable.
¾″ Wide x .030″ Thick, 100′ Roll with Tote
Material Sku Quantity/Price
1+
Stainless Steel with Plastic Tote Y3534 $89.95
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
  • Details
  • Reviews

Stainless Steel Strapping

Stainless steel strapping is ideal for installing signs on large diameter posts and poles when standard sign mounting brackets won't work.

Flared leg bracket with 3/4" S.S. strapping

Flared leg bracket with ¾" S.S. strapping

Straight leg bracket with 3/4" S.S. strapping

Straight leg bracket with ¾" S.S. strapping

Side view of a mounted sign using S.S. strapping

Side view of a mounted sign using S.S. strapping

Front view of a mounted sign using S.S. strapping

Front view of a mounted sign using S.S. strapping

Tools required for installation:

  1. Strapping tool with cutter such as our RTST-1, Y3532, or Y3533
  2. 2 Flared or Straight Leg sign mounting brackets
  3. Hammer

Installation steps:

  1. Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
  2. Insert one end of the strapping into your straight or flared leg sign mounting bracket.
  3. Insert the same end into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
  4. Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
  5. Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
  6. Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
  7. Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping
  8. Repeat these steps to install the second band of strapping.
  9. At last, proceed to install the sign onto the brackets, using the hardware provided (1 hex head bolt and 1 washer each)
Strapping being inserted into the buckle

Strapping being inserted
into the buckle

Strapping being inserted into wing seal

Strapping being inserted
into wing seal

The other end of the strapping being inserted and bent to hold it in place

The other end of the strapping
being inserted and bent to hold it in place

Strapping tool Y3532 tightening the strapping around the pole

Strapping tool Y3532 tightening
the strapping around the pole

Strapping tool Y3533 tightening the strapping around the pole

Same process with a different tool Y3533 tightening the strapping around the pole

Using either the Spinner or Ratchet tool cut the excess strapping

Using either the Spinner or Ratchet tool cut the excess strapping

Extra strapping left over to be sealed under buckle or wing seal

Extra strapping left over to be sealed under buckle or wing seal

Bend the strapping over the buckle or wing seal to partially secure the strapping

Bend the strapping over the buckle or wing seal to partially secure the strapping

Wing seal or buckle being closed to secure the strapping

Wing seal or buckle being
closed to secure the strapping

Photo of mounted sign bracket

Photo of mounted sign bracket

Sign installation process using stainless strapping

Sign installation process

Photo of a mounted sign using strapping

Photo of a mounted sign

Verified Secure | Customer Approved

Call Us 800-274-6271