One-Handed Ratchet Tool with Cutter
- Item #
- Y3533
The One-Handed Ratchet Tool For Stainless Steel Strapping provides an effortless way to install banding around poles and pipes. This tool accepts strap widths of 1/4" to 3/4", strap thicknesses of 0.015" to .030", weighs 2.9 lbs., and includes a cutter.
Frequently Purchased Together
Product Information
Details
One-Handed Ratchet Tool with Cutter
The one-handed ratchet tool for stainless steel strapping provides a quick and easy way to install banding around poles and pipes. Use with ¼″ to ¾″ wide strapping.
Installation
- Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
- Insert one end of the strapping into your straight leg sign mounting bracket.
- Insert the same end into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
- Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
- Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
- Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
- Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping.
- Repeat these steps to install the second band of strapping.
and bent to hold it in place
the strapping around the pole
seal to partially secure the strapping
