Spinner Type Tensioner Tool - Y3532, Sign Mounting Hardware

Spinner Type Tensioner Tool

Spinner Type Tensioner Tool
Item #
Y3532

Size:

Material:

Laminate:

Mounting:

Packaging:

Qty
Each
1+
109.95
Price: 109.95
0 In Stock
Special freight arrangements are necessary. Learn More.

Need a quote for a large order? Call 800-274-6271 or email us.

The Spinner Type Tensioner Tool is used for tensioning stainless steel strapping around poles and piping. It features a spring loaded gripper lever for more efficient strap handling and the cut-off handle is vinyl coated for a more comfortable operation. It also has a built-in cutter to remove the excess strapping. It will tension up to 2400 lbs. and accommodates 1/4" to 3/4" wide strapping with band thicknesses of .020" to .030". The tool weighs 4 lbs., is 10" long and has an arm length of 5".

Product Information

Details

Spinner Type Tensioner Tool

The spinner type tensioner tool is used for tensioning stainless steel strapping around poles and piping. It features a spring loaded gripper lever for more efficient strap handling and the cut-off handle is vinyl coated for a more comfortable operation. It also has a built-in cutter to remove the excess strapping. It will tension up to 2400 lbs. and accommodates ¼″ to ¾″ wide strapping with band thicknesses of .020″ to .030″. The tool weighs 4 lbs., is 10" long and has an arm length of 5″.

y3532-spinner-toll-application-front
Back view of the spinner tool tightening strapping

Installation

  1. Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
  2. Insert one end of the strapping into your straight leg sign mounting bracket.
  3. Insert the same end into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
  4. Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
  5. Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
  6. Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
  7. Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping.
  8. Repeat these steps to install the second band of strapping.
Strapping being inserted into the buckle
Strapping being inserted into the buckle
Strapping being inserted into wing seal
Strapping being inserted into wing seal
The other end of the strapping being inserted and bent to hold it in place
The other end of the strapping being inserted and bent to hold it in place
Strapping tool Y3532 tightening the strapping around the pole
Strapping tool Y3532 tightening and then cutting the strapping around the pole
Extra strapping left over to be sealed under buckle or wing seal
Extra strapping left over to be sealed under buckle or wing seal
Bend the strapping over the buckle or wing seal to partially secure the strapping
Bend the strapping over the buckle or wing seal to partially secure the strapping

Reviews

800-274-6271
Cart

Your cart is empty.