- Item #:
Drive Rivets are used as a tamper resistant installation method for mounting parking signs, property signs, and traffic signs to both 2" and 1-3/4" square posts. These particular drive rivets are aluminum with a nylon washer to protect the face of the sign and feature a 3/8" body diameter, 1" head diameter, and 5/8" body length.
Installing a drive rivet is as easy as hitting the pin with a framing hammer or sledge hammer until it is flush with the head. We also recommend installing these before you connect the sign post to your anchor post, while your sign post is laying flat on the ground. This will make the installation much easier.
⅜″ Body with 1″ Diameter Head
|Aluminum||Sold in Packages of 2 - Includes 2 drive rivets, 2 nylon washers||Y3527||$2.95|
- Drive Caps
- Post Bases
- Post Caps
Galvanized Square Sign Post
Galvanized Square Anchor Post
SNAP’n SAFE Square Post Breakaway Coupler
SNAP’n SAFE Square Post Surface Mount Breakaway Base
Corner Bolt Set with Jam Nuts
1-3/4" Square Post Flat Blade Street Name Sign Bracket
2" Square Post Flat Blade Street Name Sign Bracket
90 Degree Cross Piece For Flat Blade Street Name Signs
2-Way Adjustable Cross Piece For Flat Blade Street Name Signs
Adjustable Cross Separator For Flat Blade Street Name Signs
1-3/4" Square Post Extruded Blade Street Name Sign Bracket
2" Square Post Extruded Blade Street Name Sign Bracket
90 Degree Cross Piece For Extruded Blade Street Name Signs
2-Way Adjustable Cross Piece For Extruded Blade Street Name Signs
Adjustable Cross Separator For Extruded Blade Street Name Signs
Decorative Square Post Pyramid Cap
5/16" Nylon Washers
5/16" Zinc Plated Washers
Square Post Manual Drive Cap
32lb. Steel U-Channel Post Driver
Drive rivets are the ideal hardware for the installation of signs on galvanized square posts. Their design not only allows for fast and easy installation, but also provides tamper resistance. Our drive rivets are all aluminum to withstand the elements for the life of the sign and include a nylon washer to protect the face of the sign during installation.
- Place the sign on the square post where it meets your height requirement and line up the mounting holes with the holes on the post
- Insert the drive rivets through the mounting holes on your sign into the post.
- Using a hammer, hit the drive rivet until the pin is flush with the head.