16" Street Name Sign Wing Bracket - Y3516, Sign Mounting Hardware

16" Street Name Sign Wing Bracket

16" Street Name Sign Wing Bracket
Item #:
Y3516
Note:
Holes on sign are not required when using this bracket.
Size:  
Material:  
Packaging:  
Pricing Y3516-WG16
Quantity
Price Each:
1–4
$17.95
5–9
$16.95
10+
$15.45
Need a quote for a large order? Call 800-274-6271 or .
Qty:
Total Price: $17.95
✓ Added to Cart
Special freight arrangements are necessary. Learn more

The 16" Wide Wing Bracket is the ideal solution for mounting street name signs as well as smaller parking or traffic signs on large round posts and poles. When used for its primary purpose of mounting street name signs, these can accommodate both flat blade and extruded blade type street signs, and is best suited for street name signs up to 24" long.

These wing brackets also have three 3/8" mounting holes which allow them to be installed on wood posts, and three well-defined slots that fit up to 3/4" stainless steel strapping, helping to keep the bracket in place during the installation.

Each 16" Wing Bracket For Street Name Signs includes set screws for securing the sign to the bracket. No holes are required on the street name sign for installation. A 5/32" hex key is necessary to tighten the set screws.

16 x 8¼″
Material Sku Quantity/Price
1–4 5–9 10+
Cast Aluminum Y3516-WG16 $17.95 $16.95 $15.45
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
  • Details
  • Reviews

Street Name Sign Wing Brackets

The street name sign wing bracket is designed to hold street name signs on large round posts and poles so that the sign in perpendicular to the pole. These brackets will accommodate .080″ flat blade signs and extruded blade signs as well as 6″ and 9″ tall signs.

16 inch street name wing bracket 24 inch street name wing bracket

Tools required for installation:

  1. Strapping tool with cutter such as our RTST-1, Y3532, or Y3533
  2. 5/32″ hex key

Installation steps:

  1. Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
  2. Insert one end of the strapping into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
  3. Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
  4. Take your wing bracket and insert the middle of it under the strapping. Two people may be needed for this step to hold the bracket in place.
  5. Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
  6. Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
  7. Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping
  8. Repeat these steps to install the other two bands of strapping.
  9. Place your street name sign in the bracket.
  10. Tighten down the set screws using the 5/32″ hex key.
Strapping being inserted into the buckle

Strapping being inserted
into the buckle

Strapping being inserted into wing seal

Strapping being inserted
into wing seal

The other end of the strapping being inserted and bent to hold it in place

The other end of the strapping
being inserted and bent to hold it in place

Wing bracket being put under strapping

Wing bracket being
put under strapping

Tightening the strapping around the pole with tool number Y3532

Strapping tool Y3532 tightening
the strapping around the pole

Tightening the strapping around the pole

Same process with a different tool Y3533 tightening the strapping around the pole

Wing bracket mounted onto pole and strapping cut to size

Wing bracket mounted onto
pole and strapping cut to size

Extra strapping left over to be sealed under buckle or wing seal

Extra strapping left over to be sealed under buckle or wing seal

Bend the strapping over the buckle or wing seal to partially secure the strapping

Bend the strapping over the buckle or wing seal to partially secure the strapping

Wing seal or buckle being closed to secure the strapping

Wing seal or buckle being
closed to secure the strapping

Street name sign on wing bracket

Street name sign
on wing bracket

Tightening set screws with Y3522 T-handle Hex Key

Tightening set screws
with Y3522 T-handle Hex Key

Wing bracket used with street name sign on light pole

Verified Secure | Customer Approved

Call Us 800-274-6271