Sprinkler System General Information Sign
Item #
SPR-19-FA
Sign Reads
Sprinkler System - General Information For, Pipe Schedule System Yes No, High-piled Storage Yes No, Rack Storage: Yes No, Commodity Class: Max. Storage Ht, Aisle Width (min.), Encapsulation Yes No, Solid Shelving: Yes No, Flammable/combustible Liquids: Yes No, Other Storage: Yes No, Hazardous Materials: Yes No, Idle Pallets: Yes No, Antifreeze Systems: Yes No, Location:. Dry Or Aux Systems Yes No, Location:, Date:, Flow Test Data:, Static:, Resid:, Flow:, Pitot:, Date: Location:, Location Of Aux/low Point Drains:, Dry Pipe/double Interlock Preaction Valve Test Results, Original Main Drain Test Results:, Static:, Residual:, Venting Valve Location:, Where Injection Systems Are Used To Treat Mic Or Corrosion:, Type Of Chemical:, Concentration:, For Proper Disposal, See:, Name Of Contractor Or Designer:, Address:, Phone:.
Compliance
NFPA

Sprinkler System General Information Sign

NFPA 13 Compliant

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$9.75
Low Price Guarantee
Qty
Each
  • 1–9
    $9.75
  • 10–24
    $8.60
  • 25+
    $7.60
0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 800‑274‑5271 or email us.

Product Information

Details

A Sprinkler System General Information Sign has fire emergency messages for emergency response protocol and compliance. A Sprinkler System General Info Sign is a helpful tool which allows the installing contractor to properly identify system design basis and information relevant to the inspection, testing and maintenance requirements of NFPA 25 and NFPA 13.

Compliance

Sprinkler System Plates

Sprinkler system plates comply with the requirements of NFPA 13. They identify crucial components of a Fire Sprinkler System and the system’s operation. Failure to properly identify a sprinkler system may not only result in code violations and owner/contractor liability, in a worst-case scenario system failure in a fire emergency may occur.

What is NFPA 13?

NFPA 13 is the standard for the Installation of Sprinkler Systems and provides "a reasonable degree of protection for life and property from fire through the standardization of design, installation, and testing requirements for sprinkler systems, including private fire service mains, based on sound engineering principles, test data, and field experience." The standard applies to water supplies, sprinklers, fittings, piping, valves, all materials and accessories.

Where do sprinkler plates and identification signs need to be installed?

NFPA 13 provides a comprehensive table with a sprinkler system signage summary including sign locations and requirements. Identification signs should be permanently marked weatherproof metal signs, secured with corrosion-resistant wire, chain, or other acceptable means.

Identification sign location varies by type, but in general these should be applied on valves controlling and supplying a sprinkler system. Such locations may include:

  1. Control Valves, Drain Valves, Test Connection Valves, Alarm Valves, Dry Pipe Valves, Preaction Valves, and Deluge Valves.
  2. Anti-Freeze Loops, Anti-Freeze Main Valves and Circulating Closed Loop Systems.
  3. Auxiliary Systems
  4. System Control Riser
  • NFPA 13 Hydraulic-System Sign
  • NFPA 13 Automatic Sprinklers Sign
  • NFPA 13 Main Drain Valve Sign

Reviews

800‑274‑5271
Cart

Your cart is empty.