NFPA Propane 2-4-0 Sign - M3375, NFPA 704 Sign by SafetySign.com

NFPA Propane 2-4-0 Sign

NFPA Propane 2-4-0 Sign
Item #
M3375-AB
Label Reads
Danger Propane No Smoking No Open Flames NFPA Rating 2-4-0
Label Design
International No Smoking And International No Open Flames Symbols
Compliance
  • ECCN Certification
  • OSHA 1910.1200(c)
  • Shipping Declarations

Note:

The hazard identification (NFPA rating) for this sign was obtained from the Fire Protection Guide to Hazardous Materials 14th Edition.

Size:

Material:

Laminate:

Mounting:

Packaging:

Qty
Each
1–2
7.15
3–4
6.80
5–9
6.35
10–19
6.00
20–39
5.75
40+
4.95
Price: 7.15
Low Price Guarantee
0 In Stock
Special freight arrangements are necessary. Learn More.

Need a quote for a large order? Call 800-274-6271 or email us.

This Propane Gas safety sign with NFPA rating of 2 for Health, 4 for Flammability and 0 for Instability is a helpful resource to help protect the health and safety of personnel working with or exposed to liquid petroleum gas hazards, however, the sign is not a substitute for required protective measures for reducing or eliminating hazards. This sign is applicable to Propane Gas CAS# 74-98-6 (Formula CH3CH2CH3). The hazard identification (NFPA rating) for this sign was obtained from the Fire Protection Guide to Hazardous Materials 14th Edition.

Product Information

Compliance

NFPA 704 - A Quick Overview

What is NFPA 704?

NFPA 704 is the standard that is intended to provide a simple, readily recognized, and easily understood system of markings. These markings will provide a general idea of the hazards of a material and the severity of these hazards as they relate to emergency response.

In more specific terms the objectives of the system are to:

  • To provide an appropriate signal or alert and on-the-spot information to safeguard the lives of both public and private emergency response personnel
  • To assist in planning for effective fire and emergency control operations, including cleanup
  • To assist all designated personnel, engineers, and plant and safety personnel in evaluating hazards

The system shall also enable fire-fighting, emergency, and other personnel to easily decide whether to evacuate the area or to commence emergency control procedures. It shall also assist those personnel in selecting fire-fighting tactics and emergency procedures.

Where do I need to post NFPA 704 signs?

Signs shall be in locations approved by the authority having jurisdiction and as a minimum shall be posted at the following locations:

  • Two exterior walls or enclosures containing a means of access to a building or facility
  • Each access to a room or area
  • Each principal means of access to an exterior storage area

What do the colors and ratings in each diamond mean?


Blue - Health Hazard Rating

This relates to the capability of a material to cause personal injury due to contact with or entry into the body via inhalation, skin contact, eye contact, or ingestion. All ratings are determined under emergency conditions.

Rating Description
Blue Hazard Rating 4 Materials that can be lethal
Blue Hazard Rating 3 Materials that can cause serious or permanent injury
Blue Hazard Rating 2 Materials that can cause temporary incapacitation or residual injury
Blue Hazard Rating 1 Materials that can cause significant irritation
Blue Hazard Rating 0 Materials that would offer no hazard beyond
that of ordinary combustible material

Red - Flammability Hazard Rating

This relates to the degree of susceptibility of materials to burning.

Rating Description
Red Hazard Rating 4 Materials that rapidly or completely vaporize at atmospheric pressure and
normal ambient temperature or that are readily dispersed in air and
burn readily
Red Hazard Rating 3 Liquids and solids (including finely divided suspended solids)
that can be ignited under almost all ambient temperature conditions
Red Hazard Rating 2 Materials that must be moderately heated or exposed to
relatively high ambient temperatures before ignition can occur
Red Hazard Rating 1 Materials that must be preheated before ignition can occur
Red Hazard Rating 0 Materials that will not burn under typical fire conditions

Yellow - Instability Hazard Rating

This relates to the degree of hazard due to reaction with ambient air, light, or both, and the degree of intrinsic susceptibility of materials to release energy by self-reaction or polymerization.

Rating Description
Yellow Hazard Rating 4 Materials that can be lethal
Yellow Hazard Rating 3 Materials that can cause serious or permanent injury
Yellow Hazard Rating 2 Materials that can cause temporary incapacitation or residual injury
Yellow Hazard Rating 1 Materials that can cause significant irritation
Yellow Hazard Rating 0 Materials that would offer no hazard beyond
that of ordinary combustible material

White - Special Hazards

This area of the diamond shall address water reactivity and oxidizing properties of the materials that cause special problems or require special fire-fighting techniques.

Rating Description

OX

Material possesses oxidizing properties

SA

Material is a simple asphyxiant
 Strikethrough W Material that reacts violently or explosively with water

Non-Standard Special Hazard Symbols

These special hazard symbols and others are not part of the NFPA 704 standard, but may be used if permitted by the authority having jurisdiction.

Rating Description

ACID

Material is an acid

ALK

Material is a base (alkali)

COR

Material is corrosive

CRY

Material is cryogenic

POI

Material that is poisonous
Radioactive symbol Material is radioactive

For a more detailed look at NFPA 704, please visit our Help Center.

Source: National Fire Protection Association - NFPA 704

SafetySign.com does not recommend or specify the use of a specific safety sign because it does not have knowledge of the hazard(s) our customers are identifying. It is the customer’s sole responsibility to identify the hazard(s) that may be present and select one or more signs (stock or custom) that accurately identify their specific hazard(s) and complies with any applicable federal, state or local laws or regulations, any worksite specific rules or regulations and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). SafetySign.com disclaims any and all liability (excluding liability for our Product Warranty contained in our Terms and Conditions) for any sign selected by a customer and shall not be responsible for any personal injury or property damage resulting from the use of signs purchased from it or for the independent interpretation made of any applicable federal, state or local laws or regulations, any worksite specific rules or regulations, and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). Customer shall indemnify and hold SafetySign.com and its corporate parent and its officers, directors and affiliates harmless from and against any and all claims, loss or expense (including attorneys’ fees) arising from or related to the purchase and use by customer or any third party of any sign purchased by customer from SafetySign.com.

Reviews

800-274-6271
Cart

Your cart is empty.