Galvanized Breakaway Safety Splice Kit - Y4991, Sign Posts and Stands by SafetySign.com

Galvanized Breakaway Safety Splice Kit

Use with 8 ft, 10 ft and 12 ft U-channel Posts Only
Galvanized Breakaway Safety Splice Kit
Item #:
Y4991
Note:
Breakaway Safety Splice / U-channel Post Breakaway System. It's Both FHWA and AASHTO Approved!
Splice Type:
Galvanized Breakaway Safety Splice
Includes 3 ft. anchor post, 2 bolts, 2 spacers and 2 lock nuts. Use with 8ft, 10ft and 12ft posts
Also Available:
Green Breakaway Safety Splice
Includes 3 ft. anchor post, 2 bolts, 2 spacers and 2 lock nuts. Use with 8ft, 10ft and 12ft posts
Material:
Packaging:
Pricing Y4991
Quantity
Price Each:
1–5
$36.95
6–10
$33.75
11+
$30.25
Need a quote for a large order? Call 800-274-6271 or .
Qty:
Total Price: $36.95
✓ Added to Cart
Special freight arrangements are necessary. Learn more
The galvanized safety splice breakaway post system meets FHWA safety guidelines and is AASHTO approved. Each system ships with one 3 ft. galvanized anchor post, two bolts, two spacers, and two lock nuts, all in one package. This breakaway post system is for use with 8, 10, and 12 foot U-channel posts only.
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
  • Compliance

BREAKAWAY SIGN POST SYSTEM / SAFETY SPLICE

This breakaway system consist of the components specified below, and has been designed to break away at the stub upon impact. When assembly is struck the only part that suffers any damage is the top post making it easier to replace and install a new top post using the 3' anchor already in the ground.

Components:

  • One 3 ft Post Anchor (2 lb/ft galvanized u-channel post) to be used only with 8 ft., 10 ft. or 12 ft. top posts
  • Two high performance Grade 9 full thread bolts, two unique cylindrical spacers and nuts.
U-channel Breakaway sign post system

Our U-Channel Breakaway Sign Post System offers a tensile strength of 70,000 PSI - exactly the right strength for break-away post systems. All this strength, vehicle impact is transmitted through the post to the splice hardware. Systems using higher yield strength posts are brittle and can fracture at the point of impact (bumper height), scraping the bottom of the vehicle or puncturing the passenger compartment, the fuel tank or both.

Our breakaway sign post system costs considerably less than other competitive U-channel break-away systems. We only use two special bolts and spacers to join the base to the top post, your installation crews can install more posts faster; they will spend less time working by the side of the road, thus reducing their exposure to the risk of traffic related injuries.

This system securely nests and bolts two U-Channel posts together, yet breaks away on impact. The system has been tested and approved for multiple post installations. For single or multiple post installations, our Breakaway System stands up to a variety of wind pressure conditions and meets the new FHWA guidelines.

Breakaway Sign Post Installation:

  1. Dig a small, shallow hole approximately 6 inches in diameter and 2 inches deep; drive the ground post into the center of the hole leaving the top 4 inches above grade level exposed.
  2. Place one bolt in the 1st and 5th holes in the ground post. Slide a spacer and push-on retaining washer onto each bolt, leaving both bolts ends exposed.
  3. The top post is then nested over the end of the ground post and seated on the bolts. Lock nuts and washers are then installed and tightened and the earth around the post hole replaced and tamped firmly to complete the installation.
Safety Splice Installation

Verified Secure | Customer Approved

Call Us 800-274-6271