DC Marker - V249, Voltage Markers by SafetySign.com

DC
2¼ × 1″ (Fits ⅜–¾″ Pipe OD)
Material Sku Quantity/Price
1–99 100–249 250+
3.2 Mil Adhesive-Backed Vinyl V251 $1.25 $0.95 $0.90
8 × 1⅛″ (Fits ¾–1¼″ Pipe OD)
Material Sku Quantity/Price
1–99 100–249 250+
3.2 Mil Adhesive-Backed Vinyl V332 $0.55 $0.45 $0.43
9 × 2¼″ (Fits 1½–8″ Pipe OD)
Material Sku Quantity/Price
1–99 100–249 250+
3.2 Mil Adhesive-Backed Vinyl V249 $1.00 $0.90 $0.85
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
Oops!
This item can only be purchased with quantity . Please enter a new quantity and try again.
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:            
Service Temp Range:
Max Recommended
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.

This DC Marker has informational messages for safety identification and compliance. A DC Marker is a helpful resource to aid in the protection of the health and safety of staff, and is not an alternative for required protective measures for eliminating or reducing hazards.

  • Size
  • Material
  • Printing
Which Size Sign Should I Choose? The size necessary for your DC Marker can easily be obtained by measuring the outside diameter of the cable or conduit you will be using your DC Marker with. Once this measurement is calculated, use the table below to determine the correct size.

Size Width Height Min Pipe
Diameter
Max Pipe
Diameter
Average
Text Size
Available Materials Diagram
2¼ × 1″ (Fits ⅜–¾″ Pipe OD) 2¼″ 1″ ⅜″ ¾″ ½″
  • 3.2 Mil Adhesive-Backed Vinyl
Diagram
8 × 1⅛″ (Fits ¾–1¼″ Pipe OD) 8″ 1⅛″ ¾″ 1¼″ ½″
  • 3.2 Mil Adhesive-Backed Vinyl
Diagram
9 × 2¼″ (Fits 1½–8″ Pipe OD) 9″ 2¼″ 1½″ 3¼″ 1¼″
  • 3.2 Mil Adhesive-Backed Vinyl
Diagram
Material Thickness Outdoor Durability Service Temp. Range Available
Sizes
Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. 3.2 mils 4 to 5 Years -20° F to 200° F / -29° C to 93° C
  • 2¼ × 1″ (Fits ⅜–¾″ Pipe OD)
  • 8 × 1⅛″ (Fits ¾–1¼″ Pipe OD)
  • 9 × 2¼″ (Fits 1½–8″ Pipe OD)
 
None
Engineering Grade
High Intensity Prismatic
Diamond Grade
  NoneEngineering GradeHigh Intensity PrismaticDiamond Grade
ATSM D956 Type Type I Type IV Type IX
Brightness Standard Material 3x More 10x More
Night-Time Visibility 500' 1,000' 1,500'
Reflectivity
     
     
     
     
Using the latest printing processes, your DC Marker is printed without set-up charges or minimums. These advanced digital processes also reduce set-up times, helping to get your DC Marker shipped out faster than ever. SafetySign.com prints your graphics and text straight onto the substrate with UV and chemical resistant ink printed to ensure durability in commercial and industrial settings.
SafetySign Printing
Printing Methods

We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.

SafetySign Printing
Cross-Hatch Ink Adhesion Test

SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.

We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.

SafetySign Printing
Fonts

The text is printed in Arial Bold font.

The DC Marker from SafetySign.com uses this font to create a bold message that stands out in order to grab your attention, while also remaining clearly legible at the maximum safe viewing distance of the product.

Verified Secure | Customer Approved

Call Us 800-274-6271