Luminous Unframed Red Exit Sign - EXIT05 and EXIT08, Fire Exit Signs by SafetySign.com

EXIT. Suitable for Floor Proximity Installation. Notice - Legible Viewing Distance 50 feet. Min. 5 Foot-Candle (54 lx) fluorescent light on sign face at all times of building occupancy. UL Listed 8R74
13 × 7-11/16″
Material Sku Quantity/Price
1+
.046″ Glow-in-the-Dark Single-Sided Plastic EXIT05 $81.65
.046″ Glow-in-the-Dark Double-Sided Plastic EXIT08 $167.00
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
Oops!
This item can only be purchased with quantity . Please enter a new quantity and try again.
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:            
Service Temp Range:
Max Recommended
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.

Photoluminescent unframed red exit signs provide direction towards exits during an emergency. Luminous unframed exit signs are available as 1 or 2 sided signs. NFPA 101 Life Safety Code and NFPA 5000 compliant. UL924 listed. Luminous unframed red exit signs have 4 pre-drilled holes for mounting.

Recommended Accessories
Prev
Next
  • Compliance
  • Size
  • Material

UL 924 EXIT SIGNS

Application & Technical Information:

Easy flat wall mount installation. Signs suited for High Location and Low Location (Floor Proximity) Installation. If you purchase the OPTIONAL Set of 2 L-shaped Mounting Clips (BRK04), you can easily install sign perpendicular to wall or hang from ceiling.

  • UL924-listed for High-Location and Floor Proximity Use. NFPA101 Life Safety Code & NFPA 5000 compliant. IBC-International Building Code compliant. California Building Code compliant. EnergyStar. LEED points applicable.
  • 4 pre-drilled holes for easy installation
  • 7-11/16" x 13"
  • For perpendicular wall mount or to hang from ceiling, order L-Shaped Mounting Clips.
  • Durable Plastic Panel
  • UL924 listed.
  • 50 ft viewing distance.
UL 924 EXIT Signs

Application & Technical Information:

  • UL924-listed for High-Location Use. NFPA101 Life Safety Code & NFPA 5000 compliant. IBC-International Building Code compliant. California Building Code compliant. EnergyStar. LEED points applicable.
  • Choose one of the three bracket lengths.
  • 9" x 14-5/8"
  • Durable Plastic Panel inside Aluminum Frame.
  • UL924 listed.
  • 50 ft viewing distance.
UL 924 EXIT Signs

UL 924 Sign Brackets (Unframed Signs Only)

UL 924 Signs Bracket

L-Shaped Mounting Clips (2 clips set)
These clips work well for the UNFRAMED Plastic and UNFRAMED Aluminum exit signs.
Metal Bracket 1 x 1" Part Number: BRK04

UL 924 Sign Brackets (Ceiling Mount)

UL 924 Signs Bracket

10" away from wall or ceiling.
Aluminum Bracket 10" Part Number: BRK01
19.5" away from wall or ceiling
Aluminum Bracket 10" Part Number: BRK02

Size Width Height Available Materials Diagram
13 × 7-11/16″ 13″ 7 11/16″
  • .046″ Glow-in-the-Dark Single-Sided Plastic
  • .046″ Glow-in-the-Dark Double-Sided Plastic
Diagram
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z353.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
More Options SafetySign.com understands that the Luminous Unframed Red Exit Sign may not be available in the size that you require. Please contact our customer service team today and we’ll be happy to work with you to produce exactly what you need. Contact us now.
Material Thickness Outdoor Durability Available
Sizes
Glow-in-the-Dark Plastic .046" photoluminous plastic will not rust, is resistant to chips and cracks, and will easily bend to certain surfaces without causing material fractures. It is designed for indoor use only. This material can be charged by any light source in as little as 15 minutes, and will glow for up to 10 hours when it is charged with a strong light source for at least 60 minutes. Cool white light sources such as fluorescent lighting and sunshine are excellent activators. Soft warm lighting such as incandescent light bulbs are not as effective. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res. A.752 (18), JIS Z9100, NYC RS6-1. 0.046″ Indoor Use Only
  • 13 × 7-11/16″
Glow-in-the-Dark Double-Sided Plastic .046" photoluminous plastic will not rust, is resistant to chips and cracks, and will easily bend to certain surfaces without causing material fractures. It is designed for indoor use only. This material can be charged by any light source in as little as 15 minutes, and will glow for up to 10 hours when it is charged with a strong light source for at least 60 minutes. Cool white light sources such as fluorescent lighting and sunshine are excellent activators. Soft warm lighting such as incandescent light bulbs are not as effective. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res. A.752 (18), JIS Z9100, NYC RS6-1. 0.046″ Indoor Use Only
  • 13 × 7-11/16″
 
None
Engineering Grade
High Intensity Prismatic
Diamond Grade
  NoneEngineering GradeHigh Intensity PrismaticDiamond Grade
ATSM D956 Type Type I Type IV Type IX
Brightness Standard Material 3x More 10x More
Night-Time Visibility 500' 1,000' 1,500'
Reflectivity
     
     
     
     
SafetySign.com understands that the Luminous Unframed Red Exit Sign may not be available in a material that meets your requirements. Please contact our customer service team today and we’ll be happy to work with you to find the right material for your needs. Contact us now.

Verified Secure | Customer Approved

Call Us 800-274-6271