We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.
Fire Exit Keep Door Closed Sign
- Item #:
- Label Reads:
- Fire Exit Keep Door Closed
- Label Design:
- In Case Of Fire Use Stairs Symbol
Other configurations of this product
- LEED Compliant
7 × 10″
|3.5 Mil Adhesive-Backed Vinyl Label||N/A||R5439-AB||$5.80||$5.20||$4.70|
|.125″ Acrylic||No holes; foam tape strips provided for surface mounting||R5439-JB||$15.70||$14.95||$13.45|
|Available Materials||Mounting Holes||Corner Radius||Diagram|
|7 × 10″||7″||10″||⅝″||Up to 15′ 7″||
||No Holes; Foam Tape Strips Included||¼″||Diagram|
|Material||Thickness||Outdoor Durability||Service Temp. Range||Available
|Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F.||3.5 mils||4 to 5 Years||-20° to 176° F||
|Acrylic 0.125 acrylic is a smooth thermoplastic material with outstanding strength and stiffness, and manufactured for indoor use only.||0.125″||2 to 3 Years||-30° to 160° F||
|None||Engineering Grade||High Intensity Prismatic||Diamond Grade|
|ATSM D956 Type||–||Type I||Type IV||Type IX|
|Brightness||–||Standard Material||3x More||10x More|
SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.
We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.