Do Not Block Aisle Floor Sign - R2970, Floor Safety Signs by SafetySign.com

Do Not Block Aisle Floor Sign

Do Not Block Aisle Floor Sign
Item #:
R2970
Floor Sign Reads:
Do Not Block Aisle
Floor Sign Design:
International General Warning Symbol
Learn More Size:
Learn More
Material:
Overlaminate:
Packaging:
Pricing R2970
Quantity
Price Each:
1+
$25.15
Need a quote for a large order? Call 800-274-6271 or .
Qty:
Total Price: $25.15
Guaranteed Lowest Price
✓ Added to Cart
Special freight arrangements are necessary. Learn more
Do Not Block Aisle
14 × 20″
Material Overlaminate Sku Quantity/Price
1+
3.5 Mil Adhesive-Backed Vinyl Waterproof 25 Mil Anti-Slip Surface R2970 $25.15
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
Oops!
This item can only be purchased with quantity . Please enter a new quantity and try again.
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Reflectivity:            
Service Temp Range:
Max Recommended
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.

A Do Not Block Aisle Floor Sign has compelling messages to address safety policy and compliance interests. A Do Not Block Aisle Floor Sign is a useful tool to help protect the health and safety of staff, and is not a substitute for necessary protective measures for lessening or eliminating hazards.

  • Compliance
  • Size
  • Material
  • Printing

ANTI-SLIP FLOOR MARKERS

Warn Against Potential Hazards And Provide an Anti-Slip Surface At The Same Time.

  • Anti-Slip Safety Floor Markers:
  • Often the best place and sometimes the only place for an important message is the floor or your facility.
  • Our floor markers have a heavy clear textured surface that allows messages to be read while at the same time providing an anti-skid surface.
  • Strong adhesive and tough overlamination make these markers durable enough for the heaviest traffic areas.

Product Description:

  • Floor markers are manufactured with 4 mil adhesive backed vinyl film.
  • Supplied with a heavy adhesive backing for permanent adhesion to any surface.
  • Over laminated with clear Anti-Slip PVC (clear overlam).
  • Clear overlam consists of a coarse textured resilient top surface.
  • Non-abrasive embossed clear overlam.
  • Easily cleaned and mop friendly.
  • Material Flexibility For All Materials: Conform to either curved or flat surfaces
  • Service Temp Range For All Materials: 0°F to 122°F
  • Floor markers are available in 3 standard sizes:
    17-1/2” Circles
    24 x 6” Rectangles
    14 x 20” Signs
  • Application for Markers other than Glow in the Dark: Ideal for either indoor or outdoor use.
  • Surface Preparation For All Materials: smooth, oil-free clean and dry surface.
  • Min. Application Temp For All Materials: 50° F
  • New “Glow in the Dark” floor markers for low light or no light applications.
  • Glow in the dark material typically used in no light and low light applications, as well as emergency situations of power loss. Ideal to identify emergency exits and equipment. Signs will glow for 10 hours in continuous darkness. Material is charged by any light source in 15 to 60 minutes, depending on light intensity. This material meets or exceeds DIN 67510-I, ASTM 2072, ISO 15370, IMO Res. A.752 (18), JIS Z9100, NYC RS6-1.
  • Printed image will resist fading and mild chemicals.
  • Glow in the Dark Markers Type of light source - cool white light sources, such as fluorescent lighting and sunshine, are excellent activators. Soft warm lighting, such as incandescent light bulbs, is at the lower activation end.
  • Glow in the Dark Markers Length of Illumination - at least 60 minutes of activation are recommended.
  • Glow in the Dark Markers Outdoor Durability: Indoor use Only
Anti-Slip Floor Markers
Which Size Sign Should I Choose? The Do Not Block Aisle Floor Sign is offered in the size shown in the table below. Use the data in the table to help you decide if the size of this Do Not Block Aisle Floor Sign will meet your requirements.

Size Width Height Average
Text Size
Max Viewing
Distance
Available Materials Corner Radius Diagram
14 × 20″ 14″ 20″ 1 15/32″ Up to 36′ 9″
  • 3.5 Mil Adhesive-Backed Vinyl
½″ Diagram
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z353.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
Material Thickness Outdoor Durability Service Temp. Range Available
Sizes
Overlaminate
Adhesive-Backed Vinyl Outdoor grade high gloss calendared vinyl film, and coated with aggressive LEED compliant acrylic adhesive formulated to adhere to a variety of surfaces, ensuring durability in most commercial and industrial environments. Resistant to fading and mild chemicals. This material is in compliance with the standards set forth by the South Coast Air Quality Management District (SCAQMD) Rule #1168 and the Green Seal Standard, GS-36 for commercial adhesives pertaining to Volatile Organic Compounds (VOC). Clean and dry surface before applying. Minimum application temperature is 50°F. 3.5 mils 4 to 5 Years -20° to 176° F
  • 14 × 20″
  • Waterproof 25 Mil Anti-Slip Surface
 
None
Engineering Grade
High Intensity Prismatic
Diamond Grade
  NoneEngineering GradeHigh Intensity PrismaticDiamond Grade
ATSM D956 Type Type I Type IV Type IX
Brightness Standard Material 3x More 10x More
Night-Time Visibility 500' 1,000' 1,500'
Reflectivity
     
     
     
     
Your Do Not Block Aisle Floor Sign prints directly onto the substrate and is covered with clear, anti-slip over lamination. The over lamination protects the printed text and graphics, while also being easy to clean. This Do Not Block Aisle Floor Sign is printed using the latest digital printing technologies and processes, which greatly reduces set-up time, allowing for your Do Not Block Aisle Floor Sign to print quickly without set-up charges or minimums.
SafetySign Printing
Printing Methods

We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.

SafetySign Printing
Cross-Hatch Ink Adhesion Test

SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.

We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.

SafetySign Printing
Fonts

The text is printed in Arial Black font.

The Do Not Block Aisle Floor Sign from SafetySign.com uses this font to create a bold message that stands out in order to grab your attention, while also remaining clearly legible at the maximum safe viewing distance of the product.

Verified Secure | Customer Approved

Call Us 800-274-6271