Warning Confined Space Label - J6762, Confined Space Labels by SafetySign.com

Warning Confined Space. Authorized Personnel Only. Follow Safety Procedures. See Manual Before Servicing.
8½ × 2½″
Material Packaging Overlaminate Sku Quantity/Price
1–5 6–10 11+
2 Mil UL® Recognized White Polyester Sold in Packages of 5 UL® Recognized Clear Polyester J6762-HF $19.45 $17.60 $15.80
8½ × 2½″
Material Packaging Overlaminate Sku Quantity/Price
1–2 3–5 6+
2 Mil UL® Recognized White Polyester Sold in Packages of 50 UL® Recognized Clear Polyester J6762-HFB $135.45 $121.90 $109.75
Special Freight Arrangement: Due to the size of this product, freight shipping will be required. You may contact our customer service team for a quote or you can place your order and a customer service representative will contact you about freight shipping charges. If you would like to use your own freight carrier, please include your freight carrier account in the special instructions box at the bottom of the checkout page before placing your order. A customer service representative will be in contact with you if there are any questions.

Phone: 800-274-6271
Fax: 800-279-6897
SafetySign.com guarantees that we have the lowest price on every item we manufacture, plain and simple.
If you find a lower price, we'll match it!
Material Specifications:
Outdoor Durability:
Service Temp Range:
Max Recommended
Viewing Distance*
Up To
Please see Size Tab below for more details.
* Under favorable viewing conditions.
  • Compliance
  • Size
  • Material
  • Printing

Confined Spaces – A Brief Overview

What is a Confined Space?

OSHA defines a confined space (non-permit and permit-required) as a space that is:

(1) Large enough for an employee to enter and perform work

(2) Has limited or restricted means for entry or exit

(3) Is not designed for continuous occupancy

What is the difference between a "permit-required" and "non-permit" confined space?

Permit-Required Confined Spaces Non-Permit
Confined Spaces
Contains or has the potential to contain a hazardous atmosphere
Contains a material that has the potential for engulfing an entrant
Could trap or asphyxiate an entrant with inwardly converging walls
Could trap or asphyxiate an entrant with a floor that slopes downward and tapers to a smaller cross-section
Contains any other recognized serious safety or health hazard
Contains hazards capable of causing death or serious physical harm

From the chart above we can see that permit-required confined spaces can be extremely dangerous for workers, while non-permit confined spaces are not considered life-threatening. This doesn't mean precautionary steps shouldn't be taken before entering a non-permit space. Safety is essential no matter what the conditions are and because there is still the possibility of an injury occurring, only authorized personnel should enter the space.

OSHA states that if the workplace contains permit spaces, the employer shall inform exposed employees by posting danger signs, or by any other equally effective means, making them aware of the existence, location of, and the danger posed by the permit spaces.

Here are some examples of signs from SafetySign.com that would meet the requirements from OSHA:

Signs for Permit Required Confined Spaces

Construction signs

Signs for Non-Permit Confined Spaces

Construction signs

For more information about confined spaces please visit our help center.

SafetySign.com does not recommend or specify the use of a specific safety sign because it does not have knowledge of the hazard(s) our customers are identifying. It is the customer’s sole responsibility to identify the hazard(s) that may be present and select one or more signs (stock or custom) that accurately identify their specific hazard(s) and complies with any applicable federal, state or local laws or regulations, any worksite specific rules or regulations and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). SafetySign.com disclaims any and all liability (excluding liability for our Product Warranty contained in our Terms and Conditions) for any sign selected by a customer and shall not be responsible for any personal injury or property damage resulting from the use of signs purchased from it or for the independent interpretation made of any applicable federal, state or local laws or regulations, any worksite specific rules or regulations, and/or any applicable safety standards (including, without limitation, ANSI and/or OSHA standards). Customer shall indemnify and hold SafetySign.com and its corporate parent and its officers, directors and affiliates harmless from and against any and all claims, loss or expense (including attorneys’ fees) arising from or related to the purchase and use by customer or any third party of any sign purchased by customer from SafetySign.com.

Size Width Height Average
Text Size
Max Viewing
Available Materials Corner Radius Diagram
8½ × 2½″ 8½″ 2½″ 3/16″ Up to 4′ 8″
  • 2 Mil UL® Recognized White Polyester
¼″ Diagram
The viewing distances listed in this chart reflect the maximum viewing distance for the sign under favorable viewing conditions.
Favorable viewing conditions are those which allow for a clear, unobstructed view of the message on the sign. Examples of favorable viewing conditions are a bright lighting source over the sign, clear weather conditions, and a clear line of sight with no obstructions blocking the view of the sign from certain angles and no other nearby signs creating distractions.
In unfavorable conditions, the sign is viewable at up to half the favorable distance. Unfavorable viewing conditions are those which make it difficult to read the message of the sign. Examples of this are poor lighting such as a dimly lit room, obstructions blocking the view of the sign from certain angles, poor weather conditions, and other signs posted nearby which create a distraction.
It is the responsibility of the end user to determine the correct size, viewing distance, sign positioning, and sign size for your specific hazard. According to the ANSI Z353.2 sign standard, a ratio of 25 feet of viewing distance per inch of text height, under favorable viewing conditions, should be used to determine the size of your sign. Under unfavorable viewing conditions, such as in low light or for signs with complex messages, the ratio of viewing distance to text height is 12.5 feet to 1 inch.
More Options SafetySign.com understands that the Warning Confined Space Label may not be available in the size that you require. Please contact our customer service team today and we’ll be happy to work with you to produce exactly what you need. Contact us now.
Material Thickness Outdoor Durability Service Temp. Range Available
UL® Recognized White Polyester 2 mils thick UL Recognized white polyester with Hi-Performance pressure sensitive solvent based acrylic adhesive (UL® File No. MH10170 / CSA File No. 099241 L000), and a 1 mils thick UL Recognized clear polyester overlaminate film coated with a clear pressure sensitive acrylic adhesive (UL® File No. MH10170 / CSA File No. 099241 L000) that ensure a high degree of chemical, abrasion, and heat resistance. LEED Compliant adhesive has excellent adhesion to a wide variety of substrates such as stainless steel, acrylic, glass, coated metal and plastics. Minimum application temperature is 50°F. Clean and dry surface before applying. 2 mils 5 to 8 Years -40° to 302° F
  • 8½ × 2½″
  • UL® Recognized Clear Polyester
Engineering Grade
High Intensity Prismatic
Diamond Grade
  NoneEngineering GradeHigh Intensity PrismaticDiamond Grade
ATSM D956 Type Type I Type IV Type IX
Brightness Standard Material 3x More 10x More
Night-Time Visibility 500' 1,000' 1,500'
SafetySign.com understands that the Warning Confined Space Label may not be available in a material that meets your requirements. Please contact our customer service team today and we’ll be happy to work with you to find the right material for your needs. Contact us now.
Using the latest digital printing technologies and processes, your UL® Recognized Warning Confined Space Label has text and graphics printed directly onto the substrate with a layer of polyester sealing the inks. This process providers superior protection against mild chemicals, heat, and abrasion. These advanced practices also eliminate set-up charges and minimums. Your set-up time is also greatly reduced, allowing SafetySign.com to print your Warning Confined Space Label quickly and have them shipped out fast.
SafetySign Printing
Printing Methods

We choose our printing processes for each product carefully so you receive the best quality product at the lowest price with industry-leading turnaround times. Depending on your size, material, quantity, and other factors, your sign will print using one of our carefully-tested methods.

SafetySign Printing
Cross-Hatch Ink Adhesion Test

SafetySign.com’s advanced printing process undergoes a stringent cross-hatching test. This specifically tests the adhesion and resistance to separation of the inks from the sign. In testing, a sample from the printing process is scored and covered in adhesive tape. The tape is removed and the sample assessed for adhesion quality.

We use a three-stage process to test all of our printing processes. We print our signs using only the processes that pass all three stages, giving you the highest quality signage possible.

SafetySign Printing

The text is printed in Arial Black font.

The Warning Confined Space Label from SafetySign.com uses this font to create a bold message that stands out in order to grab your attention, while also remaining clearly legible at the maximum safe viewing distance of the product.

Verified Secure | Customer Approved

Call Us 800-274-6271