6ft Flex Sign Post Sold with Concrete or Asphalt Mounting Hardware

Traffic Cones

Item #:
Flexible Post

Product:
6ft Flex Sign Post with either Concrete or Asphalt Mounting Hardware

Type:
Parking or Traffic Sign Mounting Post


Availability:
In Stock
Size
W x H
Materials Quantity / Price Enter Quantity
Sign Mounting Bases 1
6 ft. Flexpost Base w/ 6ft Steel Post & Asphalt Mounting Anchors $240.50

You have just added


6 ft.
Flexpost Base w/ 6ft Steel Post & Asphalt Mounting Anchors

6 ft. Flexpost Base w/ 6ft Steel Post & Concrete Mounting Anchors $240.50

You have just added


6 ft.
Flexpost Base w/ 6ft Steel Post & Concrete Mounting Anchors

FLEX POST ASPHALT or CONCRETE CONFIGURATION

Flex Post Description and Accessories
  • Easy to install and easy to replace.
  • Takes a few minutes to install with no special tools required
  • Can mount any size signs, sign mounting brackets are supplied with post, brackets adjust to any sign size.
Product Specifications:
  • Specifications: 9.5” square 7 Gauge Standard Steel Base Plate
  • Carbon steel torsion spring with 1/2” Aluminum Tear-Away Bolts
  • Corrosion resistant barrier with durable black powder coat finish
  • 6 foot Galvanized Steel 1-5/8” Round Post
  • Mounting Hardware included for either Concrete or Asphalt Surfaces
  • Overall height stands 78” tall
Accessories Included:
  • 6 foot Galvanized Steel 1-5/8” Round Post
  • 1 - Base Plate & Torsion Spring
  • 4 - Hex Lag Screws and Washers (Asphalt Mounting)
  • 4 - Concrete Wedge Bolts (Concrete Mounting)
  • 2 - Sign mounting brackets (adjustable)
Installation Tools Required:
  • Marker
  • High Speed Power Drill
  • 3/4” Masonry Drill Bit (Asphalt Mounting)
  • Socket Wrench with 15/16” Drive (Asphalt Mounting)
  • 1/2” Masonry Drill Bit (Concrete Mounting)
  • Socket Wrench with 3/4” Drive (Concrete Mounting)
2 Way Sign Projection signs
Click on image to Zoom

Base Installation Steps:
  1. Position base plate and spring in desired mounting location, then proceed to mark the four base holes to be drilled.
  2. Use high speed power drill with 3/4” masonry bit and core drill each hole 6” in depth.
  3. Place base over four holes.
  4. Flat washer and hex screw will be used to secure base.
  5. Using socket wrench thread all four screws into core drilled holes.
  6. Tighten hex screw until head securely holds base plate in place.
  7. To mount 6ft post onto base see illustration above.

PARTS INCLUDED
2-Way Signs Configuration Flex Posts