No Smoking Signs-Outdoor

Item #:
J2508
Sign Reads:
No Smoking Beyond This Point
Sign Type:
Surface Mount
Packaging:
Sold individually
Size Materials Quantity / Price Enter Quantity
Adhesive Backed & Rigid Signs 1 3 5 10 20 40
10 x 7'' Label: Outdoor Durable Vinyl (Adhesive Backed) $5.85 $5.75 $5.45 $5.15 $4.20 $3.65

You have just added

10 x 7''
Label: Outdoor Durable Vinyl (Adhesive Backed)
10 x 7'' .055 Outdoor Durable Plastic $6.75 $6.55 $6.40 $6.25 $5.75 $4.75

You have just added

10 x 7''
.055 Outdoor Durable Plastic
10 x 7'' .040 Coated Rust Free Aluminum $10.75 $10.45 $9.95 $9.45 $7.65 $7.25

You have just added

10 x 7''
.040 Coated Rust Free Aluminum
14 x 10'' Label: Outdoor Durable Vinyl (Adhesive Backed) $9.75 $9.45 $8.95 $8.50 $7.60 $5.95

You have just added

14 x 10''
Label: Outdoor Durable Vinyl (Adhesive Backed)
14 x 10'' .055 Outdoor Durable Plastic $9.90 $9.50 $9.15 $8.70 $7.75 $6.25

You have just added

14 x 10''
.055 Outdoor Durable Plastic
14 x 10'' .040 Coated Rust Free Aluminum $17.45 $16.95 $16.45 $15.50 $13.50 $10.50

You have just added

14 x 10''
.040 Coated Rust Free Aluminum
ENVIRONMENTAL OR FACILITY SAFETY SIGNS
Sign Construction:
  • Signs are digital or screen printed with UV inks.
  • Adhesive backed vinyl film labels are supplied with round corners only.
  • Aluminum and Plastic signs are supplied with rounded corners and 4 mounting holes.
  • Hole configuration for safety signs is illustrated below.
  • Signs have been designed for the following applications: fence, wall or any flat surface mounting.
  • These signs are not recommended for post mounting applications.
  • Refer to Parking and Traffic if post mounting signs are needed.
  • Post mounting signs require 2 center holes (top & bottom) not 4 corner holes.
  • Signs do not have any over lamination.
  • Image / Text on signs is printed directly onto the sign material.
Safety Sign Configuration
Safety Sign Configuration
Click on image to Zoom →
Safety Sign Fonts:
Brimar standard fonts for most of our safety signs are: Arial / Arial Bold / Arial Narrow / Arial Black
For our custom signs, we allow our customers to select from a range of custom fonts.
Click on this link to view an illustration of the Arial Font Family →
What do you need to know about Safety Signs:

Environmental & facility safety signs are usually larger because they are observed at further distances. These signs usually contain lesser amounts of information for visual clarity at a distance. Signs should be placed in a clearly visible location and should be protected from damage and obliteration.

  • When safety signs are distinguished by their color code (ANSI Z535.2) they become useful tools to help protect the health and safety of personnel at the workplace.
  • Safety signs are a supplement to, and NOT a substitute for, the required protective measures for eliminating or reducing the hazards in the workplace.
  • Reading and understanding safety signs displayed on machinery or around your facility will help minimize the possibility of accidents and increase hazard awareness.
Safety Sign Functions & Objectives are:
  • The objective of safety signs is to draw attention rapidly and precisely to objects and situations capable of causing specific injuries or accidents.
  • To alert or warn personnel about workplace hazards of which they may not be aware of.
  • To restrict access to areas that present dangerous conditions.
  • To inform people of safety requirements.
  • Provide general information and directions.
  • Remind employees where PPE equipment must be worn.
  • Show where emergency equipment or exits are located.
  • Indicate where certain actions are prohibited.
Posting Safety Signs:
  • Safety signs in the workplace should be mounted for optimum viewing.
  • Signs should be placed in a manner so that they are legible, non-distracting, and non-hazardous in themselves.
  • Signs must be conspicuously posted for review by workers or any personnel approaching the hazardous area.
  • Posting safety signs in multiple languages will help ensure all of your employees are aware of the hazards that may be present.
  • Where practical place signs approximately every 40 feet.
  • In fenced areas, sign posting is only required at access points.
  • Placing too many sign, too close together should be avoided.
  • The quantity and placement of signs will depend on the extent of the hazards or the zone to be covered.
  • Whenever possible use safety symbols that are simple and easy to learn and recognize.
  • If safety symbols are being used they must be as simple as possible and should contain only essential details.
Safety Sign Recommended Viewing Distances
ANSI Z535-2007 standard uses a ratio of 25 ft of viewing distance per inch of text for Favorable Reading Conditions, and a ratio of 12 ft of viewing distance per inch of text for Unfavorable Reading Conditions.
Determining the safe viewing distance of a sign depends upon many factors: lighting, background, type font and visual acuity. Other factors to consider in determining sign size include: the complexity of the message, the reaction time necessary and the angle the sign will be seen from. In many situations it is better to use multiple smaller signs that are strategically positioned than one large sign.
Many times letter size may need to be larger than the values shown on the graphic for a variety of reasons:
  • To make the sign more noticeable from other information displayed in the area.
  • To enable legibility under low light, or other poor viewing conditions.
  • To alert persons sooner than the minimum safe viewing distance.
  • To convey special importance for portions of the message.
  • To improve legibility for persons who have vision problems with small text.

Click on the link to view an illustration of the Recommended Text Sizes →
Click on the link to Open & Print PDF with Recommended Sign Size & Viewing Distances →

Links to Industries and Government Institutions Governing Signs:
ENVIRONMENTAL & FACILITY SAFETY SIGN MATERIALS
Rigid Material: Coated Aluminum (.040):
Description & Attributes
  • Rust free aluminum signs usually coated white or yellow on both sides.
  • Graphics are digital or screen printed with UV inks.
  • Aluminum will not chip, crack or rust.
  • Aluminum is one of the most durable material options offered, with excellent resistance to harsh weather conditions.
  • Printed image will resist fading and mild chemicals.
  • Outdoor Durability: 5 to 7 years
  • Service Temp Range: -40°F to 212°F
  • Ink Features: Printed with UV Inks
  • Printing Process: Digital or Screen
  • Over laminate: None
Rigid Material: Treated Polyethylene Plastic (.055", .125"):
Description & Attributes
  • Polyethylene is a rust free, chip and crack resistant plastic (in white or yellow) treated for digital and screen printing.
  • Graphics are either digital or screen printed UV inks.
  • Polyethylene signs are an economical alternative to aluminum signs, without significant compromise on durability.
  • Printed image will resist fading and mild chemicals.
  • .055 thick plastic is typically used for safety signs up to 20 x 14”
  • .125 thick plastic is typically used for parking and traffic signs, sizes range from 12 x 18” to 24 x 24”
  • Outdoor Durability: 2 to 4 years
  • Material Flexibility: .055" thick bends easily without causing material fractures, could be molded to fit certain surfaces.
  • Service Temp Range: -40°F to 180°F
  • Ink Features: Printed with UV Inks
  • Printing Process: Digital or Screen
  • Over laminate: None
Label Material: 3.5 Mil Adhesive Backed Vinyl Film:
Description & Attributes
  • 3.5 mil thick flexible vinyl film coated with an aggressive permanent acrylic adhesive.
  • Graphics are digital or screen printed with UV inks.
  • Vinyl signs are the most economical option available. A favorite material for indoor application.
  • Printed image will resist fading and mild chemicals.
  • Outdoor Durability: 2 to 4 years
  • Material Flexibility: Conform to either curved or flat surfaces
  • Service Temp Range: -40°F to 180°F
  • Min. Application Temp: 50° F
  • Surface Preparation: Clean and Dry
  • Ink Features: Printed with UV Inks
  • Printing Process: Digital or Screen
  • Over laminate: None
  • Sign Features: 1/4” Round Corners